To score 70+ marks in GATE 2027, you should prioritize revision of high weightage topics in the last 70 days. Study areas that carry the highest weightage include Manufacturing, Engineering Mathematics, Strength of Materials, Theory of Machines, and Fluid Mechanics.

  • Along with frequent revisions, you must solve GATE ME previous years’ papers.
  • In the last 2 weeks, you should attempt at lest 8 full length mock tests for GATE ME.
  • To target 70+ marks in GATE 2027, a minimum of 7-8 study hours a day are required.
  • GATE ME last 60 days study plan has 4 phases: concept revision (Days 1 to 34), subject tests (Days 35 to 44), full mocks (Days 45 to 58), and final revision (Days 59 to 60).
  • You should aim for around 75 marks to be safe for scoring 70+ marks in GATE ME.

Expert from “GATE Wallah - ME, CE, XE, CH, PI & ES” shared a 60 day plan for GATE ME that can help students score around 70+ marks. You can go through the video below to know the study plan that you can follow to score 70+ in last 2 months.

Related Articles:

GATE 2027 ME 60 Day Study Plan for 70 Plus Marks

Key Summary

  • GATE 2027 runs on 6, 7, 13, 14, 20 and 21 February 2027, and the paper-wise schedule is notified separately, so confirm your ME date and session on the official GATE 2027 website and your admit card.
  • Start your 60 days so that Day 60 falls 1 day before your ME paper. For a 6 February paper, Day 1 is around 7 December 2026.
  • You attempt 65 questions. The 2026 ME paper had 45 MCQs and 20 NATs, so numerical practice matters as much as theory.
  • Wrong 1-mark MCQs lose 1/3 mark and wrong 2-mark MCQs lose 2/3 mark. NATs and MSQs have no negative marking.

GATE ME 2027: Marks Distribution You Should Plan Around

GATE ME paper has 4 syllabus sections plus General Aptitude, and the core Mechanical subjects together carry around 70% of the marks. Plan your time according to where the marks actually come from.

  • Materials, Manufacturing and Industrial Engineering is the biggest scoring block, with Manufacturing alone giving about 15 marks on average.
  • Engineering Mathematics has a weightage 13 marks and is the most reliable section to score full marks in.
  • Applied Mechanics and Design (Strength of Materials, Theory of Machines, Vibrations, Machine Design, Engineering Mechanics) carry about 25 marks in GATE ME.
  • IN GATE ME 2027, Fluid Mechanics and Thermal Sciences carries around 23 marks.
Topic Average Marks Priority
Casting, Forming, Joining, Machining, Metrology, PPC 15.3 Very High
Engineering Mathematics 13.3 Very High
Strength of Materials 8.8 High
Theory of Machines 8.1 High
Fluid Mechanics 7.3 High
Applications (IC engines, turbines, refrigeration, power cycles) 6.5 High
Industrial Engineering, OR, CIM 5.9 Medium
Thermodynamics 5.4 Medium
Heat Transfer 4.6 Medium
Engineering Mechanics 3.1 Medium
Machine Design 3.0 Medium
Vibrations 2.6 Low
Engineering Materials 1.1 Low
General Aptitude 15 Very High (easy marks)
GATE ME 2027: Marks Distribution You Should Plan Around

How to Score 70+ in GATE ME: Target Marks Split

A 70+ score needs about 80% accuracy in General Aptitude and Engineering Mathematics and about 65% in the core subjects. Use this split as a mock-test benchmark.

Section Total Marks Target Marks
General Aptitude 15 11 to 12
Engineering Mathematics 13 10 to 11
Manufacturing and Industrial Engineering about 21 15 to 16
Applied Mechanics and Design about 25 16 to 17
Fluid Mechanics and Thermal Sciences about 23 15 to 16
Total 100 70 to 75
How to Score 70+ in GATE ME: Target Marks Split

Also Read:

GATE ME 60-Day Study Plan: Phase 1 (Days 1 to 34) Concept Revision

Finish one subject at a time, and solve all previous year questions of that subject the same day you revise it. Spend the last 30 minutes of every day on General Aptitude.

Days Subject What to Cover
1 to 5 Engineering Mathematics Linear algebra, calculus, differential equations, probability and statistics, numerical methods, complex variables, transforms
6 to 8 Thermodynamics Laws, entropy, availability, cycles, properties of pure substances
9 to 11 Fluid Mechanics Fluid statics, Bernoulli, momentum, pipe flow, boundary layer, dimensional analysis
12 to 14 Heat Transfer Conduction, fins, convection correlations, radiation, heat exchangers
15 to 16 Applications IC engines, steam and gas turbines, refrigeration, psychrometry, hydraulic machines
17 to 19 Strength of Materials Stress and strain, Mohr's circle, beams, torsion, columns, failure theories
20 to 23 Theory of Machines and Vibrations Mechanisms, gears, cams, flywheel, balancing, free and forced vibrations
24 to 25 Engineering Mechanics and Machine Design Free body diagrams, friction, bearings, bolted joints, springs, fatigue
26 to 31 Manufacturing Casting, forming, joining, machining, machine tools, metrology and inspection
32 to 33 Industrial Engineering PPC, forecasting, inventory, scheduling, linear programming, queuing, CIM
34 Engineering Materials Phase diagrams, heat treatment, properties

GATE ME 60-Day Study Plan Phase 2 (Days 35 to 44): Revision and Subject-Wise Tests

Revise each subject in half the time you spent in Phase 1, then take a subject test. This is where you fix weak areas.

  • Days 35 to 39: Revise Engineering Mathematics, Manufacturing, Strength of Materials, Theory of Machines and Fluid Mechanics from your short notes, then take one subject test for each.
  • Days 40 to 43: Revise Thermodynamics, Heat Transfer, Applications, Industrial Engineering and Machine Design, then take subject tests.
  • Day 44: Make a list of your 15 weakest topics and a one-page formula sheet for each subject.

GATE ME 60-Day Study Plan Phase 3 (Days 45 to 58): Full-Length Mocks

Take a full 3-hour mock every alternate day and spend at least 3 hours analysing it. Mock analysis improves your score more than solving more questions.

  • Mock days (45, 47, 49, 51, 53, 55, 57): Take the mock at the same time as your exam slot.
  • Analysis days (46, 48, 50, 52, 54, 56, 58): Review every wrong and guessed question, redo your weak topics, and practise NAT calculations.
  • Track three numbers after each mock: total marks, negative marks, and unattempted questions.
  • Attempt all NATs you can solve, because they carry no negative marking.

GATE ME 60-Day Study Plan Phase 4 (Days 59 to 60): Final Revision

  • Day 59: Read only your formula sheets, error log, and short notes. Do not start new topics.
  • Day 60: Rest, check your admit card and exam centre, and sleep early.

GATE ME 60-Day Study Plan: Daily Schedule for 7 to 8 Study Hours

Time Slot Task Hours
Morning New subject or topic revision 3
Afternoon Previous year questions of the same subject 2
Evening Revision of the previous day's topics and formula notes 1.5
Night General Aptitude practice 0.5

GATE ME 60-Day Study Plan: Strategy Tips to Cross 70 Marks

  • Secure the sure marks first. General Aptitude and Engineering Mathematics together give 28 marks, so aim for at least 21 from them.
  • Attempt NATs carefully. They need clean calculations, so practise rounding and units.
  • Avoid guessing 2-mark MCQs if you cannot remove at least 2 options, since the penalty is 2/3 mark.
  • Keep an error log. Note the reason for every mistake: concept, calculation, or time.
  • Do not start new books. Stick to one standard book, your notes, and previous year papers.

GATE 2020-2026 Question Papers

GATE Exam Year GATE Question Paper PDF
GATE 2026 Download PDF
GATE 2025 Download PDF
GATE 2024 Download PDF
GATE 2023 Download PDF
GATE 2022 Download PDF
GATE 2021 Download PDF
GATE 2020 Download PDF

Also Read:

Ques. Can you prepare for GATE ME in 60 days?

Ans. Yes, if you have already studied the syllabus once and can give 7 to 8 hours a day. If you are starting from scratch, 60 days is tight, so focus on the high-weightage topics first.

Ques. Is 70 marks a good score in GATE ME?

Ans. 70 marks out of 100 is a strong target for the ME paper. The score and rank you get depend on the paper's difficulty and normalisation, so check the latest GATE cutoff and marks vs rank trends before deciding your goal.

Ques. Which subjects have the highest weightage in GATE ME?

Ans. Manufacturing (about 15 marks), Engineering Mathematics (about 13 marks) and General Aptitude (15 marks) are the highest-scoring blocks. Strength of Materials, Theory of Machines and Fluid Mechanics follow.

Ques. How many hours should you study daily for GATE ME in the last 60 days?

Ans. Study 7 to 8 hours a day with short breaks, and keep one half-day for revision every week.

Ques. Is there negative marking in GATE ME 2027?

Ans. Yes, for MCQs only. You lose 1/3 mark for a wrong 1-mark MCQ and 2/3 mark for a wrong 2-mark MCQ. NATs and MSQs have no negative marking.

Ques. How many mock tests should you take before GATE ME?

Ans. Take at least 8 full-length mocks in the last 2 weeks, along with subject-wise tests during revision.