VNIT Nagpur GATE Cut off 2025 Counselling process is going on. The GATE Cutoff range at VNIT Nagpur after Round 3 of CCMT Counselling for the OPEN Category is 352 – 645 depending on the specialization. As per the last-round GATE Cut off 2025, the top three M.E./M.Tech specialisations and their scores for the General AI category students were:
- M.Tech. in Computer Science Engineering – 639
- M.Tech. in Urban Planning Engineering – 474
- M.Tech. in Structural Engineering – 429

Also Read
VNIT Nagpur GATE Cut off 2025
The VNIT Nagpur GATE Cutoff 2025 for Round 3 shows that Computer Science & Engineering has the highest cutoffs, with OPEN category scores ranging from 639 to 645, followed closely by VLSI Design (499–510), programs like Urban Planning (122 for ST) and Biomedical Engineering (298 for SC) has lower cutoffs. OPEN category cutoffs are consistently higher than reserved categories (OBC-NCL, EWS, SC, ST) across all programs, with notable gaps in Structural Engineering (429–438 for OPEN vs. 268–269 for ST) and Urban Planning (446–474 for OPEN vs. 271–311 for SC). VNIT Nagpur GATE Cutoff 2025 for all the programs Round 3 is tabulated below:
PG Program | Category | Max GATE Score | Min GATE Score |
---|---|---|---|
Structural Dynamics & Earthquake Engineering | OBC-NCL | 336 | 332 |
Structural Dynamics & Earthquake Engineering | OPEN | 382 | 382 |
Structural Engineering | OBC-NCL | 416 | 416 |
Structural Engineering | OPEN | 438 | 429 |
Structural Engineering | ST | 269 | 268 |
Transportation Engineering | OBC-NCL | 328 | 321 |
Transportation Engineering | OPEN | 352 | 352 |
Urban Planning | ST | 122 | 122 |
Urban Planning | OBC-NCL | 356 | 344 |
Urban Planning | OPEN | 474 | 474 |
Urban Planning | OPEN | 446 | 446 |
Urban Planning | SC | 311 | 311 |
Urban Planning | SC | 271 | 271 |
VLSI Design | OBC-NCL | 463 | 463 |
VLSI Design | EWS | 440 | 440 |
VLSI Design | OPEN | 510 | 499 |
Computer Science & Engineering | OBC-NCL | 614 | 610 |
Computer Science & Engineering | EWS | 631 | 625 |
Computer Science & Engineering | OPEN | 645 | 639 |
Computer Science & Engineering | SC | 509 | 509 |
Biomedical Engineering | OBC-NCL | 340 | 340 |
Biomedical Engineering | EWS | 304 | 304 |
Biomedical Engineering | OPEN | 441 | 435 |
Biomedical Engineering | SC | 298 | 298 |
Chemical Engineering | SC | 245 | 245 |
Communication System Engineering | OBC-NCL | 373 | 370 |
Communication System Engineering | EWS | 338 | 323 |
Communication System Engineering | OPEN | 416 | 412 |
Communication System Engineering | ST | 226 | 226 |
Construction Technology and Management | OBC-NCL | 397 | 397 |
Construction Technology and Management | OPEN | 416 | 416 |
Power Electronics & Drives | EWS | 366 | 366 |
Power Electronics & Drives | OPEN | 382 | 382 |
Power Electronics & Drives | SC | 314 | 314 |
Power Electronics & Drives | OBC-NCL | 366 | 362 |
Power & Energy Systems | OBC-NCL | 341 | 334 |
Power & Energy Systems | OPEN | 354 | 354 |
Power & Energy Systems | ST | 266 | 266 |

VNIT Nagpur GATE 2025 Round 1 Vs Round 3 Minimum GATE Cutoff Score
PG Program | Min GATE Score (R1) | Min GATE Score (R3) |
---|---|---|
Computer Science & Engineering | 678 | 639 |
VLSI Design | 526 | 499 |
Urban Planning | 485 | 474 |
Biomedical Engineering | 474 | 435 |
Structural Engineering | 453 | 429 |
Communication System Engineering | 448 | 412 |
Construction Technology and Management | 447 | 416 |
Structural Dynamics & Earthquake Engineering | 416 | 382 |
Power Electronics & Drives | 401 | 382 |
Power & Energy Systems | 393 | 354 |
Transportation Engineering | 389 | 352 |

VNIT Nagpur MTech Placement Report 2024-25
MTech Placements at VNIT Nagpur had the highest package offered at an impressive 29.39 CTC, while the median package stood at 7.25 CTC. The average package was slightly higher at 7.98 CTC.
Branch-wise (individually) | Placed | Placement % | Jobs Offered | Average CTC | Median CTC | Highest CTC | Lowest CTC |
---|---|---|---|---|---|---|---|
Computer Science Engg. | 12 | 63.16 | 13 | 12.97 | 11.66 | 29.39 | 7 |
Communication System Engg. | 2 | 33.33 | 2 | 9.43 | 9.43 | 11.66 | 7.2 |
VLSI Design | 10 | 76.92 | 10 | 9.71 | 11.95 | 13 | 7 |
Integrated Power System | 2 | 40 | 2 | 6.88 | 6.75 | 7 | 6.75 |
Power Electronics & Drives | 6 | 85.71 | 6 | 10.83 | 6.75 | 14.19 | 6.75 |
CAD-CAM | 10 | 90.91 | 11 | 8.53 | 7.97 | 12.24 | 5.4 |
Biomedical Engineering | -- | -- | -- | -- | -- | -- | -- |
Heat Power Engineering | 1 | 100 | 2 | 8.62 | 8.62 | 12.24 | 5 |
Production & Industrial Engg. | 3 | 60 | 3 | 8.69 | 9.43 | 11.66 | 7.2 |
Structural Dynamics and Earthquake Engg. | 18 | 90 | 19 | 6.81 | 7 | 12.32 | 4.2 |
Structural Engg. | 21 | 95.45 | 22 | 6.43 | 6.37 | 9.25 | 4.2 |
Construction Technology & Management | 19 | 100 | 19 | 6.43 | 6.68 | 7 | 5.4 |
Environmental Engg. | 6 | 66.67 | 6 | 7.68 | 7 | 13.1 | 5 |
Geo-technical Engineering | -- | -- | -- | -- | -- | -- | -- |
Transportation Engg. | 9 | 50 | 9 | 7.21 | 6 | 12.32 | 4 |
Water Resources Engg. | 5 | 71.43 | 6 | 6.48 | 6.66 | 7 | 5 |
Urban Planning Engg. | 2 | 28.57 | 2 | 6.38 | 6.38 | 6.75 | 6 |
Chemical Engineering | 3 | 60 | 3 | 6.67 | 7 | 8 | 6 |
Material Engineering | -- | -- | -- | -- | -- | -- | -- |
Process Metallurgy | 1 | 50 | 2 | 13.03 | 13.03 | 19.25 | 6.25 |
Total | 130 | 65.09% | 137 | -- | -- | -- | -- |

VNIT Nagpur GATE 2024 Cut off
VNIT Nagpur GATE CCMT cutoff 2024 for OBC category students ranged between 303 and 514 in the last round. With a final-round cutoff score of 602, VNIT Nagpur's M.Tech. program in Computer Science Engineering proved to be the most competitive for admission according to the GATE CCMT cutoff 2024. The threshold for the same specialization was 465 in 2023. Therefore, it is clear that the General AI quota's final round closing score increased in 2024 as compared to the year before.
Course | Round 1 (Closing Score) | Last Round (Closing Score) |
---|---|---|
M.Tech in Biomedical Engineering | 451 | 393 |
M.Tech. in CAD/CAM | 364 | 363 |
M.Tech. in Chemical Engineering | 356 | 356 (R1) |
M.Tech. in Communication System Engineering | 434 | 375 |
M.Tech. in Computer Science Engineering | 624 | 602 |
M.Tech. in Construction Technology and Management | 465 | 446 |
M.Tech. in Environmental Engineering | 385 | 351 |
M.Tech. in Excavation Engineering | 355 | 355 (R1) |
M.Tech. in Geotechnical Engineering | 399 | 466 |
M.Tech. in Heat Power Engineering | 355 | 355 (R1) |
M.Tech. in Integrated Power System | 393 | 354 |
M.Tech. in Power Electronics and Drives | 398 | 354 |
M.Tech in Production & Industrial Engineering | 351 | 351 (R1) |
M.Tech. in Structural Dynamics and Earthquake Engineering | 410 | 405 |
M.Tech. in Structural Engineering | 480 | 451 |
M.Tech. in Transportation Engineering | 416 | 355 |
M.Tech. in Urban Planning | 412 | 389 |
M.Tech. in VLSI Design | 494 | 405 |
M.Tech. in Water Resource Engineering | 352 | 352 (R1) |
Also Read
Candidates must note that admission to M.Tech courses at VNIT Nagpur will be granted on the basis of GATE scores. However, NIT graduates with a B.Tech degree and a CGPA of 8.0 or above can apply without GATE Scores. For VNIT Nagpur M.Tech admissions, eligible candidates must register for GATE CCMT counselling apart from registering for M.Tech admissions on the official website of VNIT Nagpur.
VNIT Nagpur GATE Cutoff Comparison
Course | 2022 | 2023 | 2024 |
---|---|---|---|
M.Tech. in Chemical Engineering | 508 | 356 | 356 |
M.Tech. in Structural Engineering | 493 | 423 | 451 |
M.Tech. in Structural Dynamics and Earthquake Engineering | 399 | 351 | 405 |
M.Tech. in Environmental Engineering | 378 | 355 | 351 |
M.Tech. in Water Resource Engineering | 354 | 480 | 352 |
M.Tech. in Transportation Engineering | – / – | 378 | – / – |
M.Tech. in Construction Technology and Management | 436 | 412 | 446 |
M.Tech. in Communication System Engineering | 377 | 351 | 375 |
M.Tech. in VLSI Design | – / – | 368 | – / – |
M.Tech. in Integrated Power System | 353 | 350 | 354 |
M.Tech. in Power Electronics and Drives | 393 | 356 | 354 |
M.Tech. in Heat Power Engineering | – / – | 531 | – / – |
Discontinued (Jul2023)-M.Tech. in Industrial Engineering | 359 | – / – | – / – |
M.Tech. in CAD/CAM | – / – | 358 | – / – |
M.Tech. in Excavation Engineering | 356 | 507 | 355 |
M.Tech. in Computer Science Engineering | 482 | 465 | 602 |
M.Tech. in Urban Planning | – / – | 428 | – / – |
M.Tech. in Geotechnical Engineering | 350 | 359 | 466 |
M.Tech. in Process Metallurgy | 355 | – / – | – / – |
Discontinued (Jul 2024)- M.Tech. in Engineering Applied to Medical Sciences | 370 | – / – | – / – |
M.Tech in Production & Industrial Engineering | – / – | 357 | – / – |
M.Tech in Biomedical Engineering | – / – | – / – | 393 |
Latest Updates:
- To solve the last 15 years' GATE question papers (2023-1991), Download PDF Here
- GATE 2024 Syllabus PDF Available for CSE, ME, CE, EE, ECE. Download PDF Here
- GATE 2024 Exam Dates Out, Exam on February 3, 4, 10 and 11, 2024. Check Details Here
VNIT Nagpur GATE Cut off 2023
PG Program | Group | Category | Max Score | Min Score |
---|---|---|---|---|
Computer Science & Engineering | G1 | OBC-NCL | 532 | 408 |
G1 | EWS | 536 | 397 | |
G1 | OPEN-PwD | 254 | 254 | |
G1 | OPEN | 592 | 480 | |
G1 | SC | 389 | 344 | |
G1 | ST | 354 | 254 | |
CAD-CAM | G1 | OBC-NCL | 395 | 323 |
G1 | SC | 349 | 258 | |
G1 | OPEN | 528 | 380 | |
Communication System Engineering | G1 | OBC-NCL | 389 | 322 |
G1 | ST | 231 | 231 | |
G1 | EWS | 360 | 354 | |
G1 | OPEN | 467 | 351 | |
G1 | SC | 313 | 313 | |
Construction Technology and Management | G1 | ST | 295 | 263 |
G1 | OBC-NCL | 426 | 332 | |
G1 | EWS | 414 | 379 | |
G1 | OPEN | 498 | 412 | |
G1 | SC | 319 | 266 | |
Engineering Applied to Medical Sciences | G4 | SC | 308 | 308 |
G3 | OPEN | 426 | 426 | |
G3 | SC | 227 | 227 | |
Environmental Engineering | G1 | EWS | 333 | 319 |
G1 | SC | 312 | 255 | |
G1 | OBC-NCL | 366 | 331 | |
G1 | OPEN | 411 | 379 | |
G1 | ST | 275 | 275 | |
Excavation Engineering | G1 | EWS | 312 | 312 |
G1 | OBC-NCL | 337 | 323 | |
G1 | OPEN | 507 | 507 | |
G1 | SC | 251 | 242 | |
Geotechnical Engineering | G1 | SC | 312 | 255 |
G1 | OBC-NCL | 370 | 331 | |
G1 | EWS | 357 | 350 | |
G1 | OPEN | 456 | 359 | |
G1 | ST | 280 | 248 | |
Heat Power Engineering | G1 | OBC-NCL | 338 | 319 |
G1 | OPEN | 531 | 531 | |
Integrated Power Systems | G1 | OPEN | 361 | 350 |
G1 | SC | 208 | 208 | |
G1 | OBC-NCL | 321 | 310 | |
Power Electronics & Drives | G1 | SC | 292 | 257 |
G1 | EWS | 342 | 342 | |
G1 | OBC-NCL | 356 | 321 | |
G1 | OPEN | 418 | 356 | |
Production & Industrial Engineering | G1 | OBC-NCL | 342 | 320 |
G1 | SC | 285 | 264 | |
G1 | OPEN | 410 | 357 | |
Structural Dynamics & Earthquake Engineering | G1 | EWS | 343 | 336 |
G1 | OPEN | 458 | 351 | |
G1 | ST | 259 | 259 | |
G1 | SC | 323 | 268 | |
G1 | OBC-NCL | 362 | 331 | |
Structural Engineering | G1 | OPEN | 514 | 431 |
G1 | OPEN-PwD | 259 | 259 | |
G1 | SC | 434 | 288 | |
G1 | OBC-NCL | 468 | 367 | |
G1 | ST | 311 | 263 | |
G1 | EWS | 464 | 359 | |
Transportation Engineering | G1 | OBC-NCL | 414 | 341 |
G1 | EWS | 386 | 319 | |
G1 | ST | 306 | 263 | |
G1 | OPEN | 446 | 378 | |
G1 | SC | 308 | 251 | |
Urban Planning | G2 | OPEN | 478 | 393 |
G1 | SC | 276 | 171 | |
G2 | OBC-NCL | 389 | 310 | |
G2 | SC | 271 | 232 | |
G1 | OBC-NCL | 428 | 668 | |
G1 | OPEN | 506 | 428 | |
G1 | ST | 284 | 259 | |
G2 | ST | 241 | 199 | |
VLSI Design | G1 | EWS | 484 | 314 |
G1 | OPEN | 617 | 368 | |
G1 | ST | 329 | 329 | |
G1 | SC | 372 | 236 | |
G1 | OBC-NCL | 497 | 318 | |
Water Resource Engineering | G1 | SC | 271 | 263 |
G1 | OPEN | 480 | 480 | |
G1 | OBC-NCL | 343 | 335 | |
G1 | ST | 263 | 263 |
VNIT Nagpur GATE Cut off 2022
PG Program | Group | Category | Opening Rank | Closing Rank |
---|---|---|---|---|
Computer Science & Engineering | G1 | OBC-NCL | 517 | 539 |
Computer Science & Engineering | G1 | EWS | 482 | 525 |
Computer Science & Engineering | G1 | OPEN | 552 | 651 |
Computer Science & Engineering | G1 | SC | 337 | 477 |
Computer Science & Engineering | G1 | ST | 258 | 258 |
CAD-CAM | G1 | OBC-NCL | 405 | 460 |
CAD-CAM | G1 | EWS | 339 | 438 |
CAD-CAM | G1 | OPEN | 460 | 539 |
CAD-CAM | G1 | SC | 251 | 341 |
Chemical Engineering | G1 | OPEN | 361 | 370 |
Chemical Engineering | G1 | SC | 178 | 245 |
Communication System Engineering | G1 | OBC-NCL | 404 | 429 |
Communication System Engineering | G1 | EWS | 429 | 437 |
Communication System Engineering | G1 | OPEN | 441 | 546 |
Communication System Engineering | G1 | SC | 279 | 346 |
Construction Technology and Management | G1 | OBC-NCL | 426 | 451 |
Construction Technology and Management | G1 | EWS | 419 | 444 |
Construction Technology and Management | G1 | OPEN | 452 | 623 |
Construction Technology and Management | G1 | SC | 329 | 332 |
Engineering Applied to Medical Sciences | G1 | OBC-NCL | 323 | 323 |
Engineering Applied to Medical Sciences | G1 | OPEN | 370 | 370 |
Engineering Applied to Medical Sciences | G3 | OPEN | 375 | 375 |
Environmental Engineering | G1 | OBC-NCL | 368 | 406 |
Environmental Engineering | G1 | EWS | 357 | 382 |
Environmental Engineering | G1 | OPEN | 410 | 455 |
Environmental Engineering | G1 | SC | 273 | 403 |
Environmental Engineering | G1 | ST | 260 | 260 |
Excavation Engineering | G1 | OBC-NCL | 332 | 332 |
Excavation Engineering | G1 | OPEN | 356 | 379 |
Excavation Engineering | G1 | SC | 254 | 254 |
Geotechnical Engineering | G1 | OBC-NCL | 389 | 409 |
Geotechnical Engineering | G1 | OPEN | 410 | 455 |
Geotechnical Engineering | G1 | SC | 271 | 291 |
Geotechnical Engineering | G1 | ST | 266 | 266 |
Heat Power Engineering | G1 | OBC-NCL | 348 | 398 |
Heat Power Engineering | G1 | EWS | 331 | 394 |
Heat Power Engineering | G1 | OPEN | 402 | 549 |
Heat Power Engineering | G1 | SC | 247 | 272 |
Industrial Engineering | G1 | OBC-NCL | 344 | 373 |
Industrial Engineering | G1 | EWS | 370 | 382 |
Industrial Engineering | G1 | OPEN | 385 | 420 |
Industrial Engineering | G1 | SC | 308 | 348 |
Integrated Power Systems | G1 | OBC-NCL | 360 | 407 |
Integrated Power Systems | G1 | OPEN | 407 | 557 |
Integrated Power Systems | G1 | SC | 264 | 296 |
Materials Engineering | G1 | OBC-NCL | 333 | 337 |
Materials Engineering | G1 | OPEN | 355 | 366 |
Power Electronics & Drives | G1 | OBC-NCL | 392 | 432 |
Power Electronics & Drives | G1 | EWS | 358 | 393 |
Power Electronics & Drives | G1 | OPEN | 439 | 514 |
Power Electronics & Drives | G1 | SC | 275 | 282 |
Power Electronics & Drives | G1 | ST | 243 | 243 |
Structural Dynamics & Earthquake Engineering | G1 | OBC-NCL | 386 | 400 |
Structural Dynamics & Earthquake Engineering | G1 | OPEN | 406 | 522 |
Structural Dynamics & Earthquake Engineering | G1 | SC | 257 | 322 |
Structural Engineering | G1 | OBC-NCL | 462 | 493 |
Structural Engineering | G1 | EWS | 449 | 482 |
Structural Engineering | G1 | OPEN | 519 | 575 |
Structural Engineering | G1 | SC | 339 | 359 |
Structural Engineering | G1 | ST | 274 | 277 |
Transportation Engineering | G1 | OBC-NCL | 409 | 429 |
Transportation Engineering | G1 | EWS | 366 | 375 |
Transportation Engineering | G1 | OPEN | 465 | 570 |
Transportation Engineering | G1 | SC | 312 | 379 |
Transportation Engineering | G1 | ST | 293 | 293 |
Urban Planning | G1 | OBC-NCL | 375 | 436 |
Urban Planning | G1 | EWS | 345 | 345 |
Urban Planning | G1 | OPEN | 484 | 532 |
Urban Planning | G1 | SC | 266 | 267 |
Urban Planning | G1 | ST | 256 | 256 |
Urban Planning | G2 | OBC-NCL | 339 | 363 |
Urban Planning | G2 | OPEN | 454 | 484 |
Urban Planning | G2 | SC | 241 | 248 |
VLSI Design | G1 | OBC-NCL | 462 | 491 |
VLSI Design | G1 | EWS | 515 | 521 |
VLSI Design | G1 | OPEN | 525 | 555 |
VLSI Design | G1 | SC | 342 | 421 |
Water Resource Engineering | G1 | OBC-NCL | 339 | 357 |
Water Resource Engineering | G1 | OPEN | 375 | 412 |
Water Resource Engineering | G1 | SC | 260 | 263 |
VNIT Nagpur GATE Cut off 2021
Given below is tabulated GATE 2021 Cut off against different categories for different specializations offered in the M.Tech course of VNIT Nagpur. The candidates are advised to refer to the following to determine their chances of securing seats in the institute.
Programme Name | Group Id | Open Seat | EWS Seat | OBC-NCL Seat | SC Seat | ST Seat | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | ||
Computer Science & Engineering | G1 | 651 | 596 | 597 | 569 | 588 | 542 | 491 | 408 | 323 | 270 |
CAD- CAM | G1 | 693 | 552 | 519 | 428 | 571 | 481 | 337 | 289 | 236 | 236 |
Chemical Engineering | G1 | 487 | 350 | 306 | 0 | 358 | 0 | 312 | 0 | 223 | 223 |
Communication System Engineering | G1 | 603 | 488 | 498 | 412 | 515 | 445 | 345 | 236 | 0 | 0 |
Construction Technology and Management | G1 | 594 | 509 | 502 | 456 | 540 | 488 | 375 | 339 | 293 | 293 |
Environmental Engineering | G1 | 529 | 479 | 443 | 421 | 499 | 436 | 332 | 321 | 257 | 246 |
Excavation Engineering | G1 | 436 | 375 | 386 | 0 | 414 | 328 | 308 | 206 | 0 | 0 |
Geotechnical Engineering | G1 | 537 | 475 | 470 | 442 | 501 | 446 | 343 | 324 | 307 | 256 |
Heat Power Engineering | G1 | 611 | 533 | 484 | 354 | 549 | 471 | 354 | 354 | 301 | 301 |
Industrial Engineering | G1 | 577 | 507 | 427 | 416 | 499 | 416 | 306 | 0 | 0 | 0 |
Integrated Power Systems | G1 | 613 | 505 | 486 | 407 | 524 | 445 | 362 | 281 | 271 | 237 |
Materials Engineering | G1 | 499 | 362 | 374 | 334 | 423 | 0 | 0 | 0 | 0 | 0 |
Power Electronics & Drives | G1 | 623 | 543 | 547 | 441 | 551 | 490 | 396 | 279 | 252 | 244 |
Process Metallurgy | G1 | 484 | 350 | 0 | 0 | 402 | 318 | 0 | 0 | 0 | 0 |
Structural Dynamics & Earthquake Engineering | G1 | 569 | 486 | 490 | 325 | 486 | 429 | 332 | 285 | 253 | 253 |
Structural Engineering | G1 | 718 | 573 | 584 | 499 | 558 | 529 | 527 | 378 | 303 | 293 |
Transportation Engineering | G1 | 594 | 509 | 541 | 446 | 541 | 478 | 389 | 339 | 373 | 373 |
Urban Planning | G1 | 550 | 519 | 438 | 387 | 457 | 420 | 310 | 271 | 235 | 235 |
Urban Planning | G2 | 519 | 476 | 387 | 352 | 432 | 348 | 278 | 241 | 0 | 0 |
VLSI Design | G1 | 650 | 588 | 579 | 512 | 588 | 512 | 398 | 340 | 269 | 269 |
Water Resource Engineering | G1 | 493 | 439 | 442 | 322 | 472 | 393 | 335 | 290 | 253 | 0 |
Engineering Applied to Medical Sciences | G1 | 498 | 465 | 0 | 0 | 450 | 0 | 337 | 0 | 0 | 0 |
Engineering Applied to Medical Sciences | G2 | 487 | 409 | 402 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Engineering Applied to Medical Sciences | G4 | 465 | 354 | 457 | 0 | 388 | 0 | 0 | 0 | 0 | 0 |
VNIT Nagpur GATE Cut off 2020
Given below is tabulated GATE 2020 Cut off against different categories for different specializations offered in the M.Tech course of VNIT Nagpur. The candidates are advised to refer to the following to determine their chances of securing seats in the institute.
Programme Name | Group Id | Open Seat | EWS Seat | OBC-NCL Seat | SC Seat | ST Seat | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | ||
Computer Science & Engineering | G1 | 721 | 612 | 620 | 562 | 616 | 550 | 531 | 430 | 407 | 267 |
CAD-CAM | G1 | 680 | 571 | 571 | 487 | 592 | 527 | 445 | 348 | 260 | 260 |
Chemical Engineering | G1 | 533 | 374 | 366 | 358 | 421 | 314 | 282 | 218 | 0 | 0 |
Communication System Engineering | G1 | 657 | 565 | 576 | 523 | 592 | 526 | 434 | 361 | 304 | 271 |
Construction Technology and Management | G1 | 723 | 574 | 544 | 514 | 551 | 526 | 416 | 354 | 298 | 296 |
Environmental Engineering | G1 | 619 | 496 | 492 | 454 | 525 | 473 | 391 | 328 | 290 | 271 |
Excavation Engineering | G1 | 491 | 425 | 437 | 356 | 455 | 391 | 346 | 274 | 257 | 242 |
Geotechnical Engineering | G1 | 608 | 530 | 507 | 459 | 533 | 481 | 399 | 339 | 292 | 281 |
Heat Power Engineering | G1 | 678 | 598 | 622 | 543 | 621 | 529 | 417 | 313 | 273 | 273 |
Industrial Engineering | G1 | 669 | 555 | 586 | 461 | 574 | 505 | 440 | 373 | 285 | 0 |
Integrated Power Systems | G1 | 617 | 554 | 534 | 477 | 583 | 520 | 422 | 353 | 349 | 272 |
Materials Engineering | G1 | 592 | 487 | 483 | 400 | 512 | 417 | 325 | 243 | 213 | 213 |
Power Electronics & Drives | G1 | 775 | 592 | 612 | 507 | 596 | 571 | 460 | 375 | 345 | 298 |
Process Metallurgy | G1 | 523 | 432 | 440 | 352 | 491 | 369 | 293 | 230 | 0 | 0 |
Structural Dynamics & Earthquake Engineering | G1 | 600 | 537 | 555 | 405 | 530 | 487 | 443 | 350 | 281 | 253 |
Structural Engineering | G1 | 715 | 611 | 596 | 555 | 637 | 558 | 593 | 443 | 370 | 324 |
Transportation Engineering | G1 | 618 | 544 | 533 | 499 | 559 | 501 | 441 | 387 | 339 | 292 |
Urban Planning | G1 | 567 | 517 | 459 | 430 | 498 | 454 | 339 | 305 | 280 | 246 |
Urban Planning | G2 | 534 | 477 | 0 | 0 | 466 | 370 | 313 | 241 | 230 | 189 |
VLSI Design | G1 | 709 | 624 | 657 | 588 | 641 | 592 | 470 | 389 | 369 | 296 |
Water Resource Engineering | G1 | 545 | 489 | 467 | 413 | 492 | 462 | 384 | 311 | 283 | 279 |
VNIT Nagpur GATE Cut off 2019
Given below is tabulated GATE 2019 Cut off against different categories for different specializations offered in the M.Tech course of VNIT Nagpur. The candidates are advised to refer to the following to determine their chances of securing seats in the institute.
Programme Name | Group Id | Open Seat | EWS Seat | OBC-NCL Seat | SC Seat | ST Seat | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | ||
Computer Science & Engineering | G1 | 803 | 666 | 674 | 603 | 637 | 614 | 541 | 444 | 430 | 271 |
CAD-CAM | G1 | 705 | 585 | 575 | 433 | 625 | 516 | 445 | 348 | 231 | 0 |
Chemical Engineering | G1 | 470 | 408 | 424 | 0 | 428 | 303 | 339 | 214 | 0 | 0 |
Communication System Engineering | G1 | 653 | 607 | 607 | 542 | 618 | 569 | 434 | 400 | 304 | 0 |
Construction Technology and Management | G1 | 676 | 567 | 548 | 537 | 574 | 525 | 419 | 380 | 452 | 452 |
Environmental Engineering | G1 | 619 | 545 | 557 | 494 | 561 | 511 | 393 | 344 | 356 | 299 |
Excavation Engineering | G1 | 537 | 471 | 506 | 396 | 493 | 431 | 344 | 297 | 278 | 0 |
Geotechnical Engineering | G1 | 620 | 556 | 545 | 522 | 556 | 519 | 408 | 352 | 376 | 356 |
Heat Power Engineering | G1 | 702 | 618 | 597 | 488 | 629 | 556 | 553 | 389 | 275 | 0 |
Industrial Engineering | G1 | 684 | 593 | 618 | 445 | 604 | 495 | 491 | 330 | 260 | 0 |
Integrated Power Systems | G1 | 672 | 612 | 630 | 584 | 626 | 584 | 446 | 347 | 308 | 255 |
Materials Engineering | G1 | 640 | 534 | 474 | 358 | 512 | 436 | 375 | 279 | 0 | 0 |
Power Electronics & Drives | G1 | 690 | 633 | 640 | 626 | 647 | 598 | 464 | 372 | 375 | 298 |
Process Metallurgy | G1 | 571 | 488 | 487 | 0 | 494 | 374 | 340 | 228 | 0 | 0 |
Structural Dynamics & Earthquake Engineering | G1 | 582 | 526 | 541 | 459 | 537 | 467 | 392 | 307 | 311 | 246 |
Structural Engineering | G1 | 734 | 619 | 636 | 541 | 611 | 570 | 448 | 408 | 419 | 392 |
Transportation Engineering | G1 | 679 | 563 | 573 | 474 | 570 | 522 | 411 | 385 | 381 | 381 |
Urban Planning | G1 | 783 | 548 | 522 | 404 | 567 | 471 | 393 | 363 | 322 | 293 |
Urban Planning | G2 | 585 | 480 | 486 | 0 | 517 | 425 | 313 | 201 | 319 | 115 |
VLSI Design | G1 | 711 | 653 | 668 | 618 | 653 | 634 | 526 | 449 | 476 | 323 |
Water Resource Engineering | G1 | 570 | 518 | 486 | 451 | 530 | 478 | 372 | 326 | 369 | 369 |
VNIT Nagpur GATE Cut off 2018
In the following section, GATE 2018 Cut off is tabulated for VNIT Nagpur for each round against different categories. The candidates are advised to refer to the following to determine their chances of securing seats in the institute.
Programme Name | Group Id | Open Seat | OBC-NCL Seat | SC Seat | ST Seat | ||||
---|---|---|---|---|---|---|---|---|---|
Max | Min | Max | Min | Max | Min | Max | Min | ||
Computer Science & Engineering | G1 | 707 | 632 | 620 | 568 | 465 | 433 | 366 | 358 |
CAD-CAM | G1 | 705 | 616 | 634 | 579 | 465 | 390 | 296 | 262 |
Chemical Engineering | G1 | 535 | 419 | 426 | 362 | 412 | 230 | 0 | 0 |
Communication System Engineering | G1 | 617 | 551 | 566 | 489 | 405 | 305 | 264 | 264 |
Construction Technology and Management | G1 | 679 | 623 | 630 | 558 | 542 | 397 | 345 | 345 |
Environmental Engineering | G1 | 636 | 597 | 599 | 535 | 545 | 369 | 319 | 319 |
Excavation Engineering | G1 | 575 | 507 | 514 | 463 | 396 | 332 | 321 | 0 |
Heat Power | G1 | 764 | 665 | 668 | 617 | 501 | 456 | 362 | 241 |
Industrial Engineering | G1 | 707 | 622 | 641 | 586 | 447 | 394 | 324 | 299 |
Integrated Power Systems | G1 | 654 | 584 | 591 | 554 | 419 | 371 | 422 | 323 |
Materials Engineering | G1 | 629 | 561 | 586 | 533 | 430 | 331 | 264 | 254 |
Power Electronics & Drives | G1 | 679 | 609 | 626 | 565 | 433 | 382 | 360 | 320 |
Process Metallurgy | G1 | 623 | 547 | 551 | 494 | 390 | 306 | 237 | 0 |
Structural Dynamics & Earthquake Engineering | G1 | 636 | 589 | 606 | 532 | 392 | 332 | 296 | 0 |
Structural Engineering | G1 | 791 | 653 | 673 | 614 | 456 | 429 | 362 | 362 |
Transportation Engineering | G1 | 843 | 614 | 627 | 562 | 496 | 436 | 340 | 340 |
Urban Planning | G1 | 699 | 598 | 598 | 496 | 425 | 425 | 325 | 325 |
Urban Planning | G2 | 604 | 531 | 503 | 436 | 262 | 256 | 0 | 0 |
VLSI Design | G1 | 667 | 591 | 617 | 571 | 410 | 370 | 281 | 281 |
Water Resources Engineering | G1 | 604 | 574 | 574 | 497 | 379 | 361 | 369 | 304 |
VNIT Nagpur GATE Cut off 2017
In the following section, GATE 2017 Cut off is tabulated for VNIT Nagpur against different categories. The candidates are advised to refer to the following to determine their chances of securing seats in the institute.
Programme Name | Group Id | Open Seat | OBC-NCL Seat | SC Seat | ST Seat | ||||
---|---|---|---|---|---|---|---|---|---|
Max | Min | Max | Min | Max | Min | Max | Min | ||
Computer Science & Engineering | G1 | 725 | 678 | 596 | 570 | 479 | 461 | 349 | 349 |
CAD-CAM | G1 | 669 | 640 | 613 | 592 | 468 | 440 | 395 | 286 |
Chemical Engineering | G1 | 659 | 431 | 345 | 334 | 401 | 259 | 242 | 242 |
Communication System Engineering | G1 | 673 | 614 | 606 | 578 | 458 | 388 | 299 | 295 |
Construction Technology and Management | G1 | 706 | 609 | 586 | 551 | 423 | 419 | 351 | 334 |
Environmental Engineering | G1 | 742 | 579 | 578 | 540 | 416 | 408 | 370 | 321 |
Excavation Engineering | G1 | 541 | 510 | 480 | 465 | 347 | 343 | 302 | 288 |
Heat Power | G1 | 746 | 686 | 659 | 641 | 537 | 507 | 366 | 366 |
Industrial Engineering | G1 | 710 | 648 | 631 | 589 | 458 | 447 | 324 | 324 |
Integrated Power Systems | G1 | 663 | 615 | 589 | 576 | 505 | 438 | 351 | 351 |
Materials Engineering | G1 | 640 | 608 | 567 | 557 | 465 | 398 | 285 | 250 |
Power Electronics & Drives | G1 | 684 | 626 | 615 | 594 | 615 | 446 | 364 | 364 |
Structural Dynamics & Earthquake Engineering | G1 | 647 | 591 | 585 | 541 | 382 | 378 | 309 | 304 |
Structural Engineering | G1 | 706 | 659 | 641 | 594 | 454 | 419 | 401 | 401 |
Transportation Engineering | G1 | 620 | 592 | 585 | 544 | 438 | 416 | 368 | 368 |
Urban Planning | G1 | 633 | 553 | 523 | 488 | 378 | 359 | 0 | 0 |
Urban Planning | G2 | 545 | 523 | 456 | 423 | 350 | 350 | 290 | 290 |
VLSI Design | G1 | 837 | 661 | 642 | 610 | 494 | 438 | 299 | 299 |
Water Resources Engineering | G1 | 579 | 558 | 541 | 503 | 381 | 361 | 310 | 310 |
VNIT Nagpur Admissions through GATE : Eligibility & Admission Procedure
In the following section vital details like eligibility criteria, admission process, selection criteria, and courses offered by VNIT Nagpur have been discussed. This will give the candidates a clear idea about the requirements of the institute.
VNIT Nagpur Admissions through GATE 2024: Eligibility Criteria
- To be eligible for admissions to M.Tech courses in the institute, the students need to have a bachelor’s degree in relevant discipline with at least 60% marks. (5% relaxation for reserved categories)
- The candidates must possess a valid GATE Score.
VNIT Nagpur Admissions through GATE 2024: Selection Process
- The candidates are shortlisted based on the ranks secured in GATE 2024.
- Seats are allotted based on the academic records, preferred choice, and availability of seats after the conclusion of the CCMT Counseling process.
VNIT Nagpur Admissions through GATE 2024: Admission Process
Given below are the detailed steps that the students need to follow to get themselves registered with VNIT Nagpur.
- Visit the official website
- Locate and click on the registration link
- Fill in the personal details
- Click on submit.
- Pay the application fee.
- Take a printout of the receipt and the filled application form for future reference.
VNIT Nagpur Admissions through GATE 2024: Courses Offered
Given below are the M.Tech specializations offered by various departments in VNIT Nagpur.
Department | Specializations |
---|---|
Civil Engineering | Environmental Engineering |
Transportation Engineering | |
Water Resources Engineering | |
Construction Technology & Management | |
Electrical Engineering | Power Electronics and Drives |
Integrated Power Systems | |
Centre for VLSI and Nano Technology | VLSI Design |
Electronics & Communication Engineering | Communication Systems Engineering |
Computer Science and Engineering | Computer Science and Engineering |
Applied Mechanics | Structural Engineering |
Structural Dynamics & Earthquake Engineering | |
Mechanical Engineering | Industrial Engineering |
Heat Power Engineering | |
Computer-Aided Design – Computer-Aided Manufacturing | |
Metallurgical and Materials Engineering | Materials Engineering |
Process Metallurgy | |
Architecture and Planning | Urban Planning |
Chemical Engineering | Chemical Engineering |
Mining Engineering | Excavation Engineering |
Comments