Derive coulomb's law from gauss's law

Collegedunia Team logo

Collegedunia Team

Content Curator

According to gauss's law, the total electric flux (ϕ) through any close surface in free space is equal to 1/∈0 times the total electric charge (q) enclosed by the surface.

Mathematically,

\(\phi = \oint _S \overrightarrow{E} . \overrightarrow{ds} = \frac{q}{ \in _0}\)

According to coulomb’s law, the magnitude of the force of attraction and repulsion between any two point charges at rest is directly proportional to the product of the magnitude of charges and inversely proportional to the square of the distance between them.

Mathematically, it is given by:

\(F=k \frac{q_1q_2}{r_2}\)

Derivation of coulomb’s law from gauss’s law

Consider two point charges q1 and q2 are separated by distance r in a vacuum.

Derivation of coulomb’s law from gauss’s law

Let E be the magnitude of the electric field at distance r from charge q1. Therefore, the force(F) experienced by charge q2 due to electric field(E) is given by:

F = q2E …(i)

Draw a gaussian surface of radius r taking the center as the location of charge q1.

The intensity of the electric field is constant at every point of this surface.

The intensity of the electric field is constant at every point of this surface.

According to gauss’s law, the net electric flux through this surface is given by

\(\oint _S \overrightarrow{E} . \overrightarrow{ds} = \frac{q_1}{ \in _0}\)

\(\oint _S\) Eds cosθ = \(\frac{q_1}{ \in _0}\)

Direction of the electric field is always perpendicular to the surface. So, the angle between E and ds is 0.

\(\oint _S\)Eds cos0 = \(\frac{q_1}{ \in _0}\)

\(\oint _S\) Eds = \(\frac{q_1}{ \in _0}\)

Since the electric field is constant at every point of the gaussian surface, therefore we can write

\(\oint _S\) ds = \(\frac{q_1}{ \in _0}\)

But, \(\oint _S\) ds = 4πr2 is the surface area of sphere

⇒ E x 4πr= \(\frac{q_1}{ \in _0}\)

Using equation (i), we get

\(\frac{F}{q_2}\) x 4πr2  = \(\frac{q_1}{ \in _0}\)

⇒ F = \(\frac{1}{4 \pi \in _o} \frac{q_1q_2}{r_2}\)


Also Read:

CBSE CLASS XII Related Questions

1.

A tank is filled with water to a height of 12.5cm. The apparent depth of a needle lying at the bottom of the tank is measured by a microscope to be 9.4cm. What is the refractive index of water? If water is replaced by a liquid of refractive index 1.63 up to the same height, by what distance would the microscope have to be moved to focus on the needle again?

      2.

      Three capacitors each of capacitance 9 pF are connected in series. 

      (a) What is the total capacitance of the combination? 

      (b) What is the potential difference across each capacitor if the combination is connected to a 120 V supply?

          3.

          In a parallel plate capacitor with air between the plates, each plate has an area of 6 × 10–3 m2 and the distance between the plates is 3 mm. Calculate the capacitance of the capacitor. If this capacitor is connected to a 100 V supply, what is the charge on each plate of the capacitor?

              4.
              A circular disc is rotating about its own axis. An external opposing torque 0.02 Nm is applied on the disc by which it comes rest in 5 seconds. The initial angular momentum of disc is

                • $0.1\,kgm^2s^{-1}$
                • $0.04\,kgm^2s^{-1}$
                • $0.025\,kgm^2s^{-1}$
                • $0.01\,kgm^2s^{-1}$

                5.
                A circular disc is rotating about its own axis at uniform angular velocity \(\omega.\) The disc is subjected to uniform angular retardation by which its angular velocity is decreased to \(\frac {\omega}{2}\) during 120 rotations. The number of rotations further made by it before coming to rest is

                  • 120
                  • 60
                  • 40
                  • 20

                  6.

                  A parallel plate capacitor made of circular plates each of radius R = 6.0 cm has a capacitance C = 100 pF. The capacitor is connected to a 230 V ac supply with a (angular) frequency of 300 rad s−1.

                  1. What is the rms value of the conduction current?
                  2. Is the conduction current equal to the displacement current?
                  3. Determine the amplitude of B at a point 3.0 cm from the axis between the plates.
                  A parallel plate capacitor made of circular plates

                      CBSE CLASS XII Previous Year Papers

                      Comments



                      No Comments To Show