BTech in Production Engineering is a 4-year full-time graduation programme that deals with manufacturing, engineering, management and improvement of complex procedures that are used in production processes. It teaches about the engineering procedures that are involved in production and manufacturing processes. The objective of this course is to improve efficiency, increase the manufacturing effectiveness and quality control, reduce costs that are involved in production and also increase marketability at the same time.
Admissions to this course are done on the basis of entrance exams such as IIT JEE Mains and Advanced. There are also certain colleges that conduct their own entrance exams such as BITSAT for Birla Institute of Technology. Also, some colleges accept admissions on the basis of IIT scores. After the exam results are out, the shortlisted candidates are then called for counseling where admission can be confirmed.
Some of the top institutes that offer B.Tech. Production Engineering are NIT Trichy, NIT Calicut, NIT Agartala, Jawaharlal Nehru Institute of Technology, Hyderabad, Kalinga Institute of Industrial Technology, Orissa, etc. the average course fees is between INR 50,000-3.5 L for the entire duration of the course. The average starting per annum salary that B.Tech. Production Engineering graduates range between INR 3-7 LPA.
Table of Contents
1.1 What is B.Tech Production Engineering Course
1.2 What does a Production Engineer do?
1.3 Why study B.Tech Production Engineering?
2.1 Eligibility
2.2 Entrance Exams
3.1 Eligibility
- B.Tech Production Engineering Top Colleges in the World
- Alternative Courses
- B.Tech Production Engineering Jobs
8.1 Scope
8.2 Salary
BTech in Production Engineering: Highlights
Tabulated Below are some of the basic details of the course for your better reference. Candidates must refer the whole article for deep knowledge about the course,
| Course Name | BTech in Production Engineering |
| Course Duration | 4 years |
| Exam Type | Semester Type |
| Eligibility Criteria | 10+ 2 or equivalent degree from a recognized institute with a minimum of 50% or above. Candidate must also clear the entrance test |
| Selection Process | Entrance Exam |
| AVerage Course Fees | INR 1,20,000 - 10,00,000 |
| Job positions | Production Engineers, Process Engineer, Industrial Managers, Quality Engineers, Operations Analyst, Management Analysts |
| Top Recruiters | NTPC, Hyundai, ONGC, Geometric, Tata Power, Godrej, Larsen & Toubro, Reliance Industries |
| Employment Areas | Pharmaceuticals, Research Labs, Manufacturing Sector, Communication Sector, Information Technology |
| Average Annual Salary | INR 7,12,000 - 14,20,000 per annum |
What is BTech in Production Engineering?
- BTech in Production Engineering is a 4-year undergraduate programme divided into 8 semesters.
- This course is a mixture of management and engineering concepts and helps candidates understand industrial production and the problems and concepts related to it clearly.
- Production Engineering also deals with designing and installing integrated equipment to improve productivity.
What does a BTech in Production Engineering do?
- Production engineers are responsible for supervising the manufacturing processes and ensuring that quality work is produced in an efficient and safe manner.
- They have to cooperate with other engineers to improve designs of equipment in such a way that they offer better services and also cut costs.
- Production engineers must identify the problems in a production line and suggest strategies that would help improve those issues.
- Since production engineers are required the most in factories and industries, they have to also take care of the environmental aspect and devise strategies that would reduce carbon emissions.
- They also have to be careful about enforcing the safety protocols and procedures.
- They must also guide the new workers and instruct them well about the workings of the organizations.
- They must schedule time-to-time meetings with various departments to keep up with their work and write regular reports about the progress of the systems and production lines.
| How to Become a Production Manager ? | How to Become a Production Planner? |
| How to Become A Plant Manager? | How to become a Manufacturing Production Technicians? |
Why Study BTech in Production Engineering
Production Engineering offers very lucrative job opportunities in India and abroad. Some benefits of studying this discipline have been mentioned below:
- Since this discipline is about the working and management of industries and factories, it offers many job opportunities within the industrial sector and provides skills that are required to be a part of the industrial sector.
- This program provides a creative platform to the engineers to implement their ideas and research for the betterment of the sector.
- Experience built in this discipline is also important as the engineers get to experiment and use modern tools and equipment.
- This discipline offers profitable salaries to its engineers.
Who should study BTech in Production Engineering?
- This course can be pursued by anyone who has interest in Industrial Management and has commercial awareness.
- Candidates who have the ability to work under pressure, possess excellent problem-solving skills and ability to work in a team should pursue the course.
- Aspirants who have technical and analytical skills can also pursue this course.
- Apart from this, candidates must also have communication and interpersonal skills.
BTech in Production Engineering: Admission Process in India
The admission process does differ from one college to another. The eligibility criteria might also differ. Candidates must check the eligibility criteria criteria before applying for the program. The basic eligibility criteria is that the candidates must have completed their 10+2 from science stream from a recognized board.
- First, the candidates have to register themselves for the exam with basic details like name, email id and mobile number.
- The applicants must fill the application form correctly with all necessary details and ensure that all details are accurate.
- Candidates must scan and upload the necessary documents.
- They have to pay the fees after completing the application process.
- After filling the form, admit cards to the exam will be released soon as soon as the date for the exam is out. Candidates can download the admit cards from the official website.
- Candidates must go through the past year papers and syllabus to prepare for the entrance exam.
- After giving the exam, the results are announced. Candidates can check their results on the official website itself.
- If the candidates secure admission through the cut-off released, they will have to undergo through the counseling and admission process.
BTech in Production Engineering Course: Eligibility
The eligibility criteria for B.Tech. Production Engineering is as follows:
- Candidates must have completed their 10+2 from the science stream from a recognized board with a 50% aggregate.
- Candidates must take any of the following entrance exams to secure admission in an Engineering college like IIT JEE, SRMJEEE, WBJEE, UPTU, etc.
- Admissions to most engineering universities are done on the basis of the score of the common entrance exam.
BTech in Production Engineering Course: Entrance Exam
| Entrance Exams | Exam Dates |
|---|---|
| JEE Mains | Check Here |
| JEE Advanced | Check Here |
| WBJEE | Check Here |
| VITEEE | Check Here |
| SRMJEE | Check Here |
| KEAM | Check Here |
BTech in Production Engineering Course: Admission Process in Abroad
There are many universities abroad that offer B.Tech In Production Engineering. Candidates willing to study abroad can opt to pursue the course from any of the top colleges mentioned below. The criteria of B.Tech in Production Engineering is quite different from that of India. The criteria is mentioned below,
- Candidates will be required to appear for Graduate Record Examination (GRE) exam
- The candidates will be required to fill the application form online
- They must pay the application fees online
- Candidates with valid GRE scores can apply for the course.
- Candidates will be required to submit the Statement of Purpose specifying the reason for studying in that college and the purpose of doing the course with all academic qualifications.’
- Candidates must also submit 2 Reference letters of the academic professional from the last college attended.
- Candidates will also have to submit proof of their finances.
BTech in Production Engineering Course: Eligibility Criteria
The eligibility criteria abroad is very different from that of India. Some of the eligibility criteria is mentioned below for your reference,
- Candidates must have Completed their 10+2 from the science stream from a recognized board.
- Candidate must also clear Graduate Record Examination (GRE)
- Candidates must have a valid score in the GRE.
- They must also have a valid English Language test score like IELTS, TOEFL, etc.
BTech in Production Engineering Syllabus
| First Year | |
|---|---|
| Professional Communication | Environmental Studies |
| Engineering Mathematics-1 | Engineering Physics |
| Engineering Chemistry | Fundamentals of Electrical Engineering |
| Fundamentals of Electronics Engineering | Engineering Drawing |
| Fundamentals of Mechanical Engineering | Technical Communication |
| Engineering Mathematics-2 | Fundamentals of Computer |
| Second Year | |
| Engineering Mathematics-3 | Computer Programming and Numerical Methods |
| Machine Drawing, Civil Drawing and Estimation | Kinematics of Machines |
| Mechanics of Solids | Production Process-1 |
| Machine Tools-1 | Production Drawing |
| Metal Joining Processes | Fluid Mechanics and Machines |
| Metallurgy and Material Science | Numerical Techniques |
| Third Year | |
| Applied Statistics | Resource Management Techniques |
| Reliability, Maintenance and Safety Engineering | Dynamics of Machines |
| Non Traditional Manufacturing Processes | Computer aided Drafting and Cost Estimation |
| Thermal Engineering | Computer Graphics and CAD |
| Design for Manufacture and Assembly | Design of Machine Elements |
| CNC Machines | Metrology and Quality Assurance |
| Fourth Year | |
| Manufacturing System and Simulation | Work Design and Facilities Planning |
| Automation and CIM | Fluid Power Control and Mechatronics |
| Industrial Economics | Fluid Power Control |
| Manufacturing Planning and Control | Elective-1 |
| Elective-2 | Design of Production Tooling |
| Colloquium | Project |
| Elective I | Elective II |
|
|
BTech in Production Engineering: Top Colleges in India
The average fees of this course is around INR 36,000 - 5,00,000 for the entire duration. Some of the top colleges in India are mentioned below for your reference,
| Name of the College | City | Average Fees |
|---|---|---|
| National Institute of Engineering | Trichy | 1,61,700 |
| National Institute of Engineering | Calicut | 53,622 |
| Woxsen University | Hyderabad | 3,62,500 |
| Birla Institute of Engineering | Ranchi | 2,85,000 |
| Jawaharlal Nehru Technological University | Hyderabad | 3,12,000 |
| BML Munjal University | Gurugram | 2,52,000 |
| kalinga Institute of Industrial Engineering | Orissa | 3,50,000 |
| University of Engineering and Management | Kolkata | 1,71,000 |
| National Institute of Engineering | Agartala | 1,50,100 |
| Greater Noida institute of Engineering | Greater Noida | 1,27,970 |
BTech in Production Engineering: College Comparison
| Particulars | IIT Delhi | IIT Roorkee | DTU Delhi |
|---|---|---|---|
| Overview | Established in 1961, this public technical and research institute is globally acclaimed for its standard of teaching. It offers various undergraduate, postgraduate, diploma and doctoral courses and admissions are done on the basis of IIT JEE. | Established way back in 1847, this institute is the oldest IITs of all. It has 22 departments and offers various undergraduate, postgraduate, diploma and doctoral courses in Engineering, Applied Sciences, Humanities & Applied Sciences and Management with special emphasis on technological research. | Established in 1941, it was first affiliated to the University of Delhi but in 2009, it attained the University status and came to be known as Delhi Technological University. It offers various undergraduate and postgraduate courses and admissions are done on the basis of JAC-Delhi. |
| NIRF Ranking | 2 | 6 | 35 |
| Fees | 8.09 L | 8.52 L | 7.81 L |
| Salary package | 16 LPA | 24 LPA | 15.31 LPA |
BTech in Production Engineering: Top colleges in World
Apart from India, There are several colleges abroad in which the candidate can opt to pursue BTech in Production Engineering . Some of the top Countries are USA, UK, Canada, Australia. Tabulated below are the top colleges along with their average fees are mentioned below for your knowledge,
| Name of the College | City | Average Course Fees |
|---|---|---|
| University of Nottingham | United Kingdom | 24,63,300 |
| University of Engineering | Australia | 42,51,000 |
| University of Texas | United States | 26,65,000 |
| Confederation College of Applied Arts and Engineering | Canada | 19,69,000 |
| Lawrence Technological University | United States | 36,77,000 |
| RMIT University | Australia | 41,81,000 |
| Chisholm Institute of TAFE | Australia | 29,69,000 |
| University of New South Wales | Australia | 23,60,000 |
| University of Sydney | Australia | 36,38,000 |
| McMaster University | Canada | 18,81,000 |
BTech in Production Engineering: Alternative Courses
| Particulars | B.Tech in Industrial & Production Engineering | B.Tech in Industrial Engineering | B.Tech in Industrial Engineering & Management |
|---|---|---|---|
| Overview | It is a 4-year undergraduate programme divided into 8 semesters that focuses on the study of developing, implementing, improving and installing systems that benefit the industrial processes. | It is a 4-year undergraduate programme divided into 8 semesters that focuses on imparting knowledge about the industrial processes like designing and installing equipment, production, manufacturing, etc. | It is a 4-year undergraduate programme divided into 8 semesters that combines the aspects of management and engineering by teaching about industrial development along with managerial concepts. |
| Average course fees | 80,000-2,00,000 | 80,000-4,25,000 | 1,00,000 - 4,00,000 |
| Top Colleges | IIT Delhi, IIT Roorkee, VIT, BIT Ranchi | IIT Kharagpur, IIT Delhi, IIT Roorkee, BIT Pilani | IIT Delhi, IIT Kanpur, IIT Bombay, Jadavpur University |
| Average Salary Package | 16 LPA | 12 LPA | 13.58 LPA |
BTech in Production Engineering Jobs
| Job Profile | Description | Average Annual Salary |
|---|---|---|
| Production Engineer | Production engineers are responsible for supervising and improving production in a factory or industry and make sure that no safety protocols are breached and everything runs smoothly. | 3 LPA |
| Process Engineer | A process engineer specializes in equipment that processes raw materials to finished products. | 4.1 LPA |
| Industrial Managers | A management engineer makes sure that all operations within an organization run smoothly. | 25 LPA |
| Quality Engineers | A quality engineer is responsible for ensuring that all the manufactured products meet certain quality standards. They also conduct certain tests to ensure the same. | 5 LPA |
| Operations Analyst | An Operations analyst is responsible for solving internal problems within an organization and ensuring the implementation of business oriented strategies. | 4.75 LPA |
| Health and Safety Engineers | Health and Safety Engineers are experts who combine the knowledge of engineering and health to design systems that do not harm people physically and also protects from damage. | 5.68 LPA |
BTech in Production Engineering: Scope
- BTech in Production Engineering has many job opportunities in India and abroad.
- Since the economy of countries is increasingly becoming dependent on its industries and factories, they are growing at a very fast pace and so is the demand for production engineers, quality engineers, industrial managers, operations analysts, etc.
- Moreover, production engineering offers a lucrative salary as well and has been considered as a safe option professionally.
- Therefore, production engineering has a lot of scope in the coming times.
BTech in Production Engineering: Salary
According to Glassdoor, the candidate who has completed Bachelor in Technology in Production Engineering can expect a starting salary of more than INR 4,75,000 per annum. The salary is also dependent on a number of factors like skills, location, experience, company profile etc. Tabulated below is the salary of the Candidates based on the years of experience,
| Years of Experience | Average salary Package |
|---|---|
| 0 - 3 years | 4.5 LPA |
| 4- 6 years | 6 LPA |
| 7-10 years | 9 LPA |
| 11-15 years | 12 LPA |
| 16 - 20 years | 14 LPA |
BTech in Production Engineering: FAQs
Ques. What are common entrance exams for BTech in Production Engineering ?
Ans. There are some of the common entrance exam that the candidate is required to appear in order to get admission in the program:
- IIT JEE
- CUET
- TANCET
- SRMJEEE
Ques. What is the scope of BTech in Production Engineering in India?
Ans. The scope of BTech in Production Engineering is quite extensive. Due to the continuance growth in demand, the candidate will get to explore various opportunities in the automobile, refinery, construction, finance, etc.
Ques. How Can one pursue a BTech in Production Engineering ?
Ans. In order to pursue BTech in Production Engineering , the candidate will be required to appear in the entrance test such as GATE, CUET, etc and on the basis of that score the candidate will be given admission
Ques. What are the job profiles after BTech in Production Engineering ?
Ans. Some of the popular job profiles after BTech in Production Engineering are:
- Production engineer
- Quality engineer
- Operations analyst
- Management engineer
Ques. What are the employment areas after completing a BTech in Production Engineering ?
Ans. some of the employment areas after completing B.Tech. in Production Engineering are:
- Automobile sector
- Refinery
- Textile industry
- Railways
- Finance
Ques. Can a BTech in Production Engineering be done from a distance?
Ans. Yes, this program can be done from a distance however, it is better to pursue this course from a regular college.
Ques. What is the highest salary after completing a degree in BTech in Production Engineering ?
Ans. According to Glassdoor, the highest salary after completing a BTech in Production Engineering is around INR 25,00,00 per annum.
Ques. Name some of the top colleges for BTech in Production Engineering ?
Ans. Some of the top colleges for pursuing BTech in Production Engineering are:
- IIT Delhi
- IIT Roorkee
- IIT Kharagpur
- NIT Trichy
Ques. Who are the top recruiters for BTech in Production Engineering ?
Ans. Some of the top recruiters for BTech in Production Engineering are
- Tata power
- ONGC
- Reliance
- NTPC
![National Institute of Technology - [NITC]](https://image-static.collegedunia.com/public/college_data/images/appImage/1509520478cvrnew1.png?h=150&w=320&mode=crop)
![National Institute of Technology - [NITC]](https://image-static.collegedunia.com/public/college_data/images/logos/col27828.jpg?h=30&w=30&mode=crop)
![College of Engineering - [COEP]](https://image-static.collegedunia.com/public/college_data/images/appImage/28215_ENGINEERING_NEW.jpg?h=150&w=320&mode=crop)
![College of Engineering - [COEP]](https://image-static.collegedunia.com/public/college_data/images/logos/1715329636Untitled.jpeg?h=30&w=30&mode=crop)
![National Institute of Technology - [NIT]](https://image-static.collegedunia.com/public/college_data/images/appImage/25916_NITAGARTALA1_APP.jpg?h=150&w=320&mode=crop)
![National Institute of Technology - [NIT]](https://image-static.collegedunia.com/public/college_data/images/logos/1509604414cgdvshbcjhdszkdnckj.png?h=30&w=30&mode=crop)
![Sri Venkateswara University - [SVU]](https://image-static.collegedunia.com/public/college_data/images/appImage/25379_1443161485SVU_New.jpg?h=150&w=320&mode=crop)
![Sri Venkateswara University - [SVU]](https://image-static.collegedunia.com/public/college_data/images/logos/1480418256thumb.jpg?h=30&w=30&mode=crop)
![Veermata Jijabai Technological Institute - [VJTI]](https://image-static.collegedunia.com/public/college_data/images/appImage/28202_1443441209VJTI_New.jpg?h=150&w=320&mode=crop)
![Veermata Jijabai Technological Institute - [VJTI]](https://image-static.collegedunia.com/public/college_data/images/logos/1413914280vmji.jpg?h=30&w=30&mode=crop)
![Veer Surendra Sai University of Technology - [VSSUT]](https://image-static.collegedunia.com/public/college_data/images/appImage/25771_VSSUT-Burla-Odisha.jpg?h=150&w=320&mode=crop)
![Veer Surendra Sai University of Technology - [VSSUT]](https://image-static.collegedunia.com/public/college_data/images/logos/1394874057qw.png?h=30&w=30&mode=crop)
![Haldia Institute of Technology - [HIT]](https://image-static.collegedunia.com/public/college_data/images/appImage/1488782357f4.jpg?h=150&w=320&mode=crop)
![Haldia Institute of Technology - [HIT]](https://image-static.collegedunia.com/public/college_data/images/logos/1488782357f3.jpg?h=30&w=30&mode=crop)
Comments