CUET PG PYQs for Polymers and Fiber Materials with Solutions: Practice CUET PG Previous Year Questions

Content Writer | Journalism Graduate | Updated 3+ months ago

Polymers and Fiber Materials is an important topic in the Textile Design section in CUET PG exam. Practising this topic will increase your score overall and make your conceptual grip on CUET PG exam stronger.

This article gives you a full set of CUET PG PYQs for Polymers and Fiber Materials with explanations for effective preparation. Practice of CUET PG Textile Design PYQs including Polymers and Fiber Materials questions regularly will improve accuracy, speed, and confidence in the CUET PG 2026 exam.

CUET PG PYQs for Polymers and Fiber Materials with Solutions

1.
To the fiber add 85% formic acid at room temperature. Then the fiber dissolves. Identify the fiber.
- Acrylic
- Wool
- Silk
- Polyester
View Solution
2.
Jig dyeing, Beam Dyeing, Winch Dyeing, Pad Dyeing and Jet Dyeing are all examples of ................ dyeing at the fabric stage.
- Fiber/ Stock
- Piece
- Garment
- Yarn
View Solution
3.
Rank the below-mentioned fibers as per their drapability property from high to low.
A. Cotton
B. Flax
C. Wool
D. Silk
Choose the correct answer from the options given below:
- A, B, C, D
- D, C, A, B
- B, A, D, C
- C, B, D, A
View Solution
4.
Which among the below mentioned fibers is not a regenerated fiber?
- Rayon
- Nylon
- Acetate
- Lyocell
View Solution
5.
Match List - I with List - II.
List - I List - II
A. Flax I. Leaf
B. Banana II. Stem
C. Kapok III. Fruit
D. Coir IV. Seed hair
Choose the correct answer from the options given below :
- \( \text{A-II, B-I, C-IV, D-III} \)
- \( \text{A-I, B-II, C-III, D-IV} \)
- \( \text{A-II, B-IV, C-I, D-III} \)
- \( \text{A-IV, B-I, C-II, D-III} \)
View Solution
6.
Wool blend mark signifies that at least ................ % of virgin wool fibers have been blended with only one other fiber.
- 0
- 10
- 20
- 60
View Solution
7.
Match List - I with List - II.
List - I List - II
A. Nomex I. Manmade Cellulosic Fibres
B. Kapok II. Animal Protein Fibres
C. Mohair III. High Performance Fibres
D. Tencel IV. Natural Cellulosic Fibres
Choose the correct answer from the options given below :
- \( \text{A-I, B-II, C-III, D-IV} \)
- \( \text{A-III, B-II, C-IV, D-I} \)
- \( \text{A-IV, B-III, C-II, D-I} \)
- \( \text{A-III, B-IV, C-II, D-I} \)
View Solution
8.
Match the LIST-I with LIST-II.

Choose the correct answer from the options given below:
- A - I, B - II, C - III, D - IV
- A - I, B - III, C - II, D - IV
- A - I, B - II, C - IV, D - III
- A - III, B - IV, C - I, D - II
View Solution
9.
Match List - I with List - II.
List - I (Microscopic Appearance) List - II (Fiber)
A. Convolutions I. Wool
B. Smooth II. Silk
C. Scales and crimp III. Cotton
D. Smooth and crimped IV. Rayon
Choose the correct answer from the options given below :
- \( \text{A-III, B-II, C-I, D-IV} \)
- \( \text{A-IV, B-II, C-I, D-III} \)
- \( \text{A-III, B-IV, C-I, D-II} \)
- \( \text{A-I, B-IV, C-II, D-III} \)
View Solution
10.
Length, strength, flexibility, uniformity and _______ are primary properties that are necessary for a fibre to be called a textile fibre.
- Density
- Elasticity
- Cohesiveness
- Resiliency
View Solution
11.
Match List - I with List - II.
List - I List - II
A. Kevlar I. PBO
B. Dyneema II. HDPE
C. Zylon III. PPS
D. Ryton IV. Aramid
Choose the correct answer from the options given below :
- \( \text{A-III, B-IV, C-I, D-II} \)
- \( \text{A-III, B-I, C-IV, D-II} \)
- \( \text{A-IV, B-III, C-I, D-II} \)
- \( \text{A-IV, B-II, C-I, D-III} \)
View Solution
12.
Assertion (A): Aramid fabrics are used extensively in protective clothing.
Reason (R): Aramid fibres exhibit high strength and high flammability. Choose the most appropriate answer from the options given below:
- Both (A) and (R) are correct and (R) is the correct explanation of (A)
- Both (A) and (R) are correct but (R) is not the correct explanation of (A)
- (A) is correct but (R) is not correct
- (A) is not correct but (R) is correct
View Solution
13.
Linen is a generic name for ................
- Flax
- Jute
- Cotton
- Silk
View Solution
14.
Titanium Oxide and Geranium Oxide are added in dope solution before spinning of the manufactured fibers as:
- Delusterant
- Moderant
- Chelating Agent
- Oxidising Agent
View Solution
15.
Write the sequence of mechanism of Textile Dyeing.
A. Dissolution of dye molecules in water
B. Absorption of dye into the fiber
C. Dispersion of the dye in the bath
D. Diffusion of dye inside the fiber
Choose the correct answer from the options given below:
- A, B, C, D
- A, C, B, D
- B, A, D, C
- C, A, B, D
View Solution

List - I	List - II
A. Flax	I. Leaf
B. Banana	II. Stem
C. Kapok	III. Fruit
D. Coir	IV. Seed hair

List - I	List - II
A. Nomex	I. Manmade Cellulosic Fibres
B. Kapok	II. Animal Protein Fibres
C. Mohair	III. High Performance Fibres
D. Tencel	IV. Natural Cellulosic Fibres

List - I (Microscopic Appearance)	List - II (Fiber)
A. Convolutions	I. Wool
B. Smooth	II. Silk
C. Scales and crimp	III. Cotton
D. Smooth and crimped	IV. Rayon

List - I	List - II
A. Kevlar	I. PBO
B. Dyneema	II. HDPE
C. Zylon	III. PPS
D. Ryton	IV. Aramid

View more CUET PG Questions

SHARE ON FACEBOOK SHARE ON TWITTER

Comments

No Comments To Show

SUBSCRIBE TO OUR NEWS LETTER

COLLEGE NOTIFICATIONS

EXAM NOTIFICATIONS

NEWS UPDATES

Download the Collegedunia app on

CUET PG PYQs for Polymers and Fiber Materials with Solutions: Practice CUET PG Previous Year Questions

CUET PG PYQs for Polymers and Fiber Materials with Solutions

1.
To the fiber add 85% formic acid at room temperature. Then the fiber dissolves. Identify the fiber.

2.
Jig dyeing, Beam Dyeing, Winch Dyeing, Pad Dyeing and Jet Dyeing are all examples of ................ dyeing at the fabric stage.

3.
Rank the below-mentioned fibers as per their drapability property from high to low.
A. Cotton
B. Flax
C. Wool
D. Silk
Choose the correct answer from the options given below:

4.
Which among the below mentioned fibers is not a regenerated fiber?

5.
Match List - I with List - II.
List - I List - II
A. Flax I. Leaf
B. Banana II. Stem
C. Kapok III. Fruit
D. Coir IV. Seed hair
Choose the correct answer from the options given below :

6.
Wool blend mark signifies that at least ................ % of virgin wool fibers have been blended with only one other fiber.

7.
Match List - I with List - II.
List - I List - II
A. Nomex I. Manmade Cellulosic Fibres
B. Kapok II. Animal Protein Fibres
C. Mohair III. High Performance Fibres
D. Tencel IV. Natural Cellulosic Fibres
Choose the correct answer from the options given below :

8.
Match the LIST-I with LIST-II.

Choose the correct answer from the options given below:

9.
Match List - I with List - II.
List - I (Microscopic Appearance) List - II (Fiber)
A. Convolutions I. Wool
B. Smooth II. Silk
C. Scales and crimp III. Cotton
D. Smooth and crimped IV. Rayon
Choose the correct answer from the options given below :

10.
Length, strength, flexibility, uniformity and _______ are primary properties that are necessary for a fibre to be called a textile fibre.

11.
Match List - I with List - II.
List - I List - II
A. Kevlar I. PBO
B. Dyneema II. HDPE
C. Zylon III. PPS
D. Ryton IV. Aramid
Choose the correct answer from the options given below :

12.
Assertion (A): Aramid fabrics are used extensively in protective clothing.
Reason (R): Aramid fibres exhibit high strength and high flammability. Choose the most appropriate answer from the options given below:

13.
Linen is a generic name for ................

14.
Titanium Oxide and Geranium Oxide are added in dope solution before spinning of the manufactured fibers as:

15.
Write the sequence of mechanism of Textile Dyeing.
A. Dissolution of dye molecules in water
B. Absorption of dye into the fiber
C. Dispersion of the dye in the bath
D. Diffusion of dye inside the fiber
Choose the correct answer from the options given below:

Comments

SUBSCRIBE TO OUR NEWS LETTER

CUET PG PYQs for Polymers and Fiber Materials with Solutions

1.To the fiber add 85% formic acid at room temperature. Then the fiber dissolves. Identify the fiber.

2.Jig dyeing, Beam Dyeing, Winch Dyeing, Pad Dyeing and Jet Dyeing are all examples of ................ dyeing at the fabric stage.

3.Rank the below-mentioned fibers as per their drapability property from high to low. A. Cotton B. Flax C. Wool D. Silk Choose the correct answer from the options given below:

4.Which among the below mentioned fibers is not a regenerated fiber?

5.Match List - I with List - II.List - IList - IIA. FlaxI. LeafB. BananaII. StemC. KapokIII. FruitD. CoirIV. Seed hairChoose the correct answer from the options given below :

6.Wool blend mark signifies that at least ................ % of virgin wool fibers have been blended with only one other fiber.

7.Match List - I with List - II.List - IList - IIA. NomexI. Manmade Cellulosic FibresB. KapokII. Animal Protein FibresC. MohairIII. High Performance FibresD. TencelIV. Natural Cellulosic FibresChoose the correct answer from the options given below :

8.Match the LIST-I with LIST-II. Choose the correct answer from the options given below:

9.Match List - I with List - II.List - I (Microscopic Appearance)List - II (Fiber)A. ConvolutionsI. WoolB. SmoothII. SilkC. Scales and crimpIII. CottonD. Smooth and crimpedIV. RayonChoose the correct answer from the options given below :

10.Length, strength, flexibility, uniformity and _______ are primary properties that are necessary for a fibre to be called a textile fibre.

11.Match List - I with List - II.List - IList - IIA. KevlarI. PBOB. DyneemaII. HDPEC. ZylonIII. PPSD. RytonIV. AramidChoose the correct answer from the options given below :

12.Assertion (A): Aramid fabrics are used extensively in protective clothing. Reason (R): Aramid fibres exhibit high strength and high flammability. Choose the most appropriate answer from the options given below:

13.Linen is a generic name for ................

14.Titanium Oxide and Geranium Oxide are added in dope solution before spinning of the manufactured fibers as:

15.Write the sequence of mechanism of Textile Dyeing. A. Dissolution of dye molecules in water B. Absorption of dye into the fiber C. Dispersion of the dye in the bath D. Diffusion of dye inside the fiber Choose the correct answer from the options given below:

Comments

SUBSCRIBE TO OUR NEWS LETTER

1.
To the fiber add 85% formic acid at room temperature. Then the fiber dissolves. Identify the fiber.

2.
Jig dyeing, Beam Dyeing, Winch Dyeing, Pad Dyeing and Jet Dyeing are all examples of ................ dyeing at the fabric stage.

3.
Rank the below-mentioned fibers as per their drapability property from high to low.
A. Cotton
B. Flax
C. Wool
D. Silk
Choose the correct answer from the options given below:

4.
Which among the below mentioned fibers is not a regenerated fiber?

5.
Match List - I with List - II.
List - I List - II
A. Flax I. Leaf
B. Banana II. Stem
C. Kapok III. Fruit
D. Coir IV. Seed hair
Choose the correct answer from the options given below :

6.
Wool blend mark signifies that at least ................ % of virgin wool fibers have been blended with only one other fiber.

7.
Match List - I with List - II.
List - I List - II
A. Nomex I. Manmade Cellulosic Fibres
B. Kapok II. Animal Protein Fibres
C. Mohair III. High Performance Fibres
D. Tencel IV. Natural Cellulosic Fibres
Choose the correct answer from the options given below :

8.
Match the LIST-I with LIST-II.

Choose the correct answer from the options given below:

9.
Match List - I with List - II.
List - I (Microscopic Appearance) List - II (Fiber)
A. Convolutions I. Wool
B. Smooth II. Silk
C. Scales and crimp III. Cotton
D. Smooth and crimped IV. Rayon
Choose the correct answer from the options given below :

10.
Length, strength, flexibility, uniformity and _______ are primary properties that are necessary for a fibre to be called a textile fibre.

11.
Match List - I with List - II.
List - I List - II
A. Kevlar I. PBO
B. Dyneema II. HDPE
C. Zylon III. PPS
D. Ryton IV. Aramid
Choose the correct answer from the options given below :

12.
Assertion (A): Aramid fabrics are used extensively in protective clothing.
Reason (R): Aramid fibres exhibit high strength and high flammability. Choose the most appropriate answer from the options given below:

13.
Linen is a generic name for ................

14.
Titanium Oxide and Geranium Oxide are added in dope solution before spinning of the manufactured fibers as:

15.
Write the sequence of mechanism of Textile Dyeing.
A. Dissolution of dye molecules in water
B. Absorption of dye into the fiber
C. Dispersion of the dye in the bath
D. Diffusion of dye inside the fiber
Choose the correct answer from the options given below: