CUET PG PYQs for Irrigation Engineering with Solutions: Practice CUET PG Previous Year Questions

Content Writer | Journalism Graduate | Updated 3+ months ago

Irrigation Engineering is an important topic in the Soil Science section in CUET PG exam. Practising this topic will increase your score overall and make your conceptual grip on CUET PG exam stronger.

This article gives you a full set of CUET PG PYQs for Irrigation Engineering with explanations for effective preparation. Practice of CUET PG Soil Science PYQs including Irrigation Engineering questions regularly will improve accuracy, speed, and confidence in the CUET PG 2026 exam.

CUET PG PYQs for Irrigation Engineering with Solutions

1.
Match LIST I with LIST II
\[ \begin{array}{|l|l|} \hline \textbf{LIST I (Crop)} & \textbf{LIST II (Ideal IW/CPE for irrigation)} \\ \hline A. \ \text{Sorghum} & I. \ 0.8 \\ B. \ \text{Maize} & II. \ 0.9 \\ C. \ \text{Cotton} & III. \ 0.6 \\ D. \ \text{Barley} & IV. \ 0.75 \\ \hline \end{array} \]
Choose the correct answer from the options given below:
- A-I, B-II, C-III, D-IV
- A-II, B-I, C-IV, D-III
- A-III, B-I, C-II, D-IV
- A-II, B-I, C-III, D-IV
View Solution
2.
The braking distance for a vehicle moving on a positive 3% grade at an initial speed of 50 Km/hr and final speed of 20 Km/hr would be :
- 14.48 m
- 15.58 m
- 16.68 m
- 17.78 m
View Solution
3.
If the spacing between the sprinklers on a lateral is doubled, the application rate will be:
- The same
- Increase two times
- Reduced to half
- Reduced by 10%
View Solution
4.
Arrange the following irrigation efficiencies starting from source of water to water needed in the root zone:
A. Reservoir storage efficiency
B. Application efficiency
C. Storage efficiency
D. Conveyance efficiency
Choose the correct answer from the options given below:
- A, B, C, D
- A, D, C, B
- A, D, B, C
- A, D, C, B
View Solution
5.
The ratio between the water that reaches a farm or field and that is diverted from the irrigation water source is called:
- Crop coefficient
- Water conveyance efficiency
- Application efficiency
- Distribution efficiency
View Solution
6.
Graded bunding has been generally used in areas receiving rainfall more than {
- \(600\ \text{mm/year}\)
- \(400\ \text{mm/year}\)
- \(200\ \text{mm/year}\)
- \(450\ \text{mm/year}\)
View Solution
7.
The soil having the maximum water holding capacity is:
- Clayey
- Sandy
- Loamy
- Gravelly
View Solution
8.
The natural rain is specifically termed as an acid rain when its pH value is :
- 7
- 4
- 10
- 8
View Solution
9.
Starting from the water source, the sequence of parts of a drip irrigation system are as follows:
A. Main line
B. Laterals
C. Sub-main
D. Emitter E. Pump and prime mover unit
Choose the correct answer from the options given below:
- A, C, B, D, E
- A, D, B, E, C
- E, B, C, D, A
- E, A, C, B, D
View Solution
10.
Arrange the parts of a tensiometer from the bottom to the top of the instrument.
A. Transparent pipe
B. Connecting tube
C. Ceramic cup
D. Vacuum gauge
Choose the correct answer from the options given below:
- A, B, C, D
- A, C, B, D
- B, A, D, C
- C, B, A, D
View Solution
11.
Write the steps involved in designing of a sprinkler system in a proper sequence.
A. Quantity of water to be applied
B. Application rate
C. Capacity of the system
D. Selection of sprinklers
Choose the correct answer from the options given below:
- A, B, C, D
- A, C, B, D
- B, A, D, C
- C, B, A, D
View Solution
12.
Match LIST I with LIST II
\[ \begin{array}{|l|l|} \hline \textbf{LIST I} & \textbf{LIST II} \\ \hline A. \ \text{Soil water not available to plant} & I. \ \text{Rhizosphere} \\ B. \ \text{Soil column occupied by root zone} & II. \ \text{Hygroscopic water} \\ C. \ \text{Vertical entry of water into soil} & III. \ \text{Infiltration} \\ D. \ \text{Tensiometer} & IV. \ \text{Soil moisture measurement} \\ \hline \end{array} \]
Choose the correct answer from the options given below:
- A-I, B-III, C-II, D-IV
- A-II, B-I, C-IV, D-III
- A-III, B-I, C-II, D-IV
- A-II, B-I, C-III, D-IV
View Solution
13.
Read the following statements about border irrigation carefully:
A. Width of borders usually varies from 10 to 25 m.
B. For a sandy and sandy loam soil on moderate slopes and small to moderate irrigation streams, border length ranges from 30 to 90 m.
C. For a medium loam soil on moderate slopes and small to moderate irrigation streams, border length ranges from 100 to 180 m.
D. For a clay loam and clay soil on moderate slopes and small to moderate irrigation streams, border length ranges from 120 to 350 m.
Choose the correct answer from the options given below:
- A, B and D only
- C only
- A and D only
- B, C, and D
View Solution
14.
The duty of canal water (hectare per cm per second) 'D', base period of crop 'b' in days and delta 'd' in meter are related as:
- D = b x d
- D = b / d
- D = 8.64 \(\frac{b}{d}\)
- D = 8.64 \(\frac{d}{b}\)
View Solution
15.
Given below are two statements: Assertion (A): From the construction point of view, the open well may be classified into three types: well with impervious lining, well with pervious lining and well with no lining. Reason (R): The impervious lining provides most stable and useful type of well for obtaining water supply.
- Both A and R are correct and R is the correct explanation of A
- Both A and R are correct but R is not the correct explanation of A
- A is correct but R is not correct
- A is not correct but R is correct
View Solution

View more CUET PG Questions

SHARE ON FACEBOOK SHARE ON TWITTER

CUET PG PYQs for Irrigation Engineering with Solutions: Practice CUET PG Previous Year Questions

CUET PG PYQs for Irrigation Engineering with Solutions

2.
The braking distance for a vehicle moving on a positive 3% grade at an initial speed of 50 Km/hr and final speed of 20 Km/hr would be :

3.
If the spacing between the sprinklers on a lateral is doubled, the application rate will be:

4.
Arrange the following irrigation efficiencies starting from source of water to water needed in the root zone:
A. Reservoir storage efficiency
B. Application efficiency
C. Storage efficiency
D. Conveyance efficiency
Choose the correct answer from the options given below:

5.
The ratio between the water that reaches a farm or field and that is diverted from the irrigation water source is called:

6.
Graded bunding has been generally used in areas receiving rainfall more than {

7.
The soil having the maximum water holding capacity is:

8.
The natural rain is specifically termed as an acid rain when its pH value is :

9.
Starting from the water source, the sequence of parts of a drip irrigation system are as follows:
A. Main line
B. Laterals
C. Sub-main
D. Emitter E. Pump and prime mover unit
Choose the correct answer from the options given below:

10.
Arrange the parts of a tensiometer from the bottom to the top of the instrument.
A. Transparent pipe
B. Connecting tube
C. Ceramic cup
D. Vacuum gauge
Choose the correct answer from the options given below:

11.
Write the steps involved in designing of a sprinkler system in a proper sequence.
A. Quantity of water to be applied
B. Application rate
C. Capacity of the system
D. Selection of sprinklers
Choose the correct answer from the options given below:

14.
The duty of canal water (hectare per cm per second) 'D', base period of crop 'b' in days and delta 'd' in meter are related as:

Comments

SUBSCRIBE TO OUR NEWS LETTER

CUET PG PYQs for Irrigation Engineering with Solutions

2.The braking distance for a vehicle moving on a positive 3% grade at an initial speed of 50 Km/hr and final speed of 20 Km/hr would be :

3.If the spacing between the sprinklers on a lateral is doubled, the application rate will be:

4.Arrange the following irrigation efficiencies starting from source of water to water needed in the root zone: A. Reservoir storage efficiency B. Application efficiency C. Storage efficiency D. Conveyance efficiency Choose the correct answer from the options given below:

5.The ratio between the water that reaches a farm or field and that is diverted from the irrigation water source is called:

6.Graded bunding has been generally used in areas receiving rainfall more than {

7.The soil having the maximum water holding capacity is:

8.The natural rain is specifically termed as an acid rain when its pH value is :

9.Starting from the water source, the sequence of parts of a drip irrigation system are as follows: A. Main line B. Laterals C. Sub-main D. Emitter E. Pump and prime mover unit Choose the correct answer from the options given below:

10.Arrange the parts of a tensiometer from the bottom to the top of the instrument. A. Transparent pipe B. Connecting tube C. Ceramic cup D. Vacuum gauge Choose the correct answer from the options given below:

11.Write the steps involved in designing of a sprinkler system in a proper sequence. A. Quantity of water to be applied B. Application rate C. Capacity of the system D. Selection of sprinklers Choose the correct answer from the options given below:

14.The duty of canal water (hectare per cm per second) 'D', base period of crop 'b' in days and delta 'd' in meter are related as:

Comments

SUBSCRIBE TO OUR NEWS LETTER

2.
The braking distance for a vehicle moving on a positive 3% grade at an initial speed of 50 Km/hr and final speed of 20 Km/hr would be :

3.
If the spacing between the sprinklers on a lateral is doubled, the application rate will be:

4.
Arrange the following irrigation efficiencies starting from source of water to water needed in the root zone:
A. Reservoir storage efficiency
B. Application efficiency
C. Storage efficiency
D. Conveyance efficiency
Choose the correct answer from the options given below:

5.
The ratio between the water that reaches a farm or field and that is diverted from the irrigation water source is called:

6.
Graded bunding has been generally used in areas receiving rainfall more than {

7.
The soil having the maximum water holding capacity is:

8.
The natural rain is specifically termed as an acid rain when its pH value is :

9.
Starting from the water source, the sequence of parts of a drip irrigation system are as follows:
A. Main line
B. Laterals
C. Sub-main
D. Emitter E. Pump and prime mover unit
Choose the correct answer from the options given below:

10.
Arrange the parts of a tensiometer from the bottom to the top of the instrument.
A. Transparent pipe
B. Connecting tube
C. Ceramic cup
D. Vacuum gauge
Choose the correct answer from the options given below:

11.
Write the steps involved in designing of a sprinkler system in a proper sequence.
A. Quantity of water to be applied
B. Application rate
C. Capacity of the system
D. Selection of sprinklers
Choose the correct answer from the options given below:

14.
The duty of canal water (hectare per cm per second) 'D', base period of crop 'b' in days and delta 'd' in meter are related as: