CUET PG PYQs for Control Systems with Solutions: Practice CUET PG Previous Year Questions

Content Writer | Journalism Graduate | Updated 3+ months ago

Control Systems is an important topic in the Electronics Engineering section in CUET PG exam. Practising this topic will increase your score overall and make your conceptual grip on CUET PG exam stronger.

This article gives you a full set of CUET PG PYQs for Control Systems with explanations for effective preparation. Practice of CUET PG Electronics Engineering PYQs including Control Systems questions regularly will improve accuracy, speed, and confidence in the CUET PG 2026 exam.

CUET PG PYQs for Control Systems with Solutions

1.
A minimum phase unity feedback system has slope $-20\,dB/decade$ for all frequencies. The value of maximum phase margin is:
- $-90^\circ$
- $0^\circ$
- $90^\circ$
- $180^\circ$
View Solution
2.
Which of the following are listed as types of compensators for system design? A. Lead compensators B. Stepper motors C. Lag compensators D. Servo valves
- A, B and C only
- A and C only
- A, C and D only
- B, C and D only
View Solution
3.
Arrange the NR (Natural Rubber) modulus properties in descending order with same dose of cross linkers:
A. Vulcanized NR with 30 phr Carbon black (HAF)
B. Vulcanized NR with 10 phr Plasticizer (DOP)
C. Vulcanized NR
D. Vulcanized NR with 10 phr DOP and 30 phr HAF.
Choose the correct answer from the options given below:
- D, A, C, B
- C, D, A, B
- D, A, B, C
- A, D, C, B
View Solution
4.
Consider the following frequency domain specifications required to design a control system:
A. Bandwidth
B. Gain margin
C. Phase margin
D. Maximum overshoot
Choose the correct answer:
- A, B and C only
- B and D only
- A and D only
- C and D only
View Solution
5.
Arrange correct sequence of time domain specifications of a second order system in ascending order of values: A. Rise time B. Settling time C. Delay time D. Peak time
- B, D, A, C
- C, D, A, B
- C, A, D, B
- C, A, D, B
View Solution
6.
Arrange the following based on enthalpy content at $100^{\circ}C$ per kg of water.
A. Saturated vapor
B. Superheated vapor
C. Vapor with 95% quality
D. Enthalpy of vaporization
Choose the correct answer from the options given below:
- A, B, C, D
- B, A, C, D
- B, C, A, D
- A, B, D, C
View Solution
7.
Match List-I with List-II (Compensation vs Characteristics).
- A-I, B-II, C-III, D-IV
- A-I, B-II, C-IV, D-III
- A-II, B-I, C-IV, D-III
- A-II, B-I, C-III, D-IV
View Solution
8.
The thermoplastics polymers differ from thermosetting polymers by
A. High tensile strength
B. 3-D chain structure
C. Linear/branched chains
D. Reprocessibility
Choose the correct answer from the options given below:
- A and B Only
- C and B Only
- C and D Only
- D and B Only
View Solution
9.
Match the LIST-I with LIST-II:
- A-III, B-IV, C-II, D-I
- A-III, B-I, C-II, D-IV
- A-IV, B-III, C-I, D-II
- A-III, B-IV, C-I, D-II
View Solution
10.
The steady-state error of a Type 1 system for a unit step input is:
- Zero
- Infinite
- A non-zero constant
- Oscillatory
View Solution
11.
Assertion (A): Feedback control systems offer more accurate control over open-loop systems. Reason (R): Feedback establishes a link for input-output comparison and correction.
- Both (A) and (R) are correct and (R) is correct explanation
- Both (A) and (R) are correct but (R) is not explanation
- (A) is correct but (R) is incorrect
- (A) is incorrect but (R) is correct
View Solution
12.
For a chemical reaction A $\rightleftharpoons$ B, the necessary conditions for the state of equilibrium is/are,
A. $C_{A}=C_{B}$
B. $\mu_{A}=\mu_{B}$
C. $P_{A}=P_{B}$
D. $G_{A}=G_{B}$
E. $H_{A}=H_{B}$
Choose the correct answer from the options given below:
- A and C Only
- B and D Only
- D and E Only
- E Only
View Solution
13.
Please choose correct option.
A. Cellulose is not digested by human.
B. Reaction equilibrium is shifted by enzymes.
C. Aerobic conditions are responsible for TCA cycle.
D. Branched polymer chain of glucose in plants is glycogen.
Choose the correct answer from the options given below:
- A, B and D Only
- B, C and D Only
- A, B and C Only
- C, A and D Only
View Solution
14.
According to Nyquist stability criterion, the number of unstable closed-loop poles (Z) is equal to:
- N - P
- N + P
- P - N
- N × P
View Solution
15.
Assertion (A): With lag-lead compensator, the bandwidth of the system is not affected much. Reason (R): The effect of lag and lead compensation at high frequencies cancel one another.
- Both (A) and (R) are correct and (R) is the correct explanation
- Both (A) and (R) are correct but (R) is not correct explanation
- (A) is correct but (R) is incorrect
- (A) is incorrect but (R) is correct
View Solution

View more CUET PG Questions

SHARE ON FACEBOOK SHARE ON TWITTER

Comments

No Comments To Show

SUBSCRIBE TO OUR NEWS LETTER

COLLEGE NOTIFICATIONS

EXAM NOTIFICATIONS

NEWS UPDATES

Download the Collegedunia app on

CUET PG PYQs for Control Systems with Solutions

1.A minimum phase unity feedback system has slope $-20\,dB/decade$ for all frequencies. The value of maximum phase margin is:

2.Which of the following are listed as types of compensators for system design? A. Lead compensators B. Stepper motors C. Lag compensators D. Servo valves

4.Consider the following frequency domain specifications required to design a control system: A. Bandwidth B. Gain margin C. Phase margin D. Maximum overshoot Choose the correct answer:

5.Arrange correct sequence of time domain specifications of a second order system in ascending order of values: A. Rise time B. Settling time C. Delay time D. Peak time

6.Arrange the following based on enthalpy content at $100^{\circ}C$ per kg of water. A. Saturated vapor B. Superheated vapor C. Vapor with 95% quality D. Enthalpy of vaporization Choose the correct answer from the options given below:

7.Match List-I with List-II (Compensation vs Characteristics).

8.The thermoplastics polymers differ from thermosetting polymers by A. High tensile strength B. 3-D chain structure C. Linear/branched chains D. Reprocessibility Choose the correct answer from the options given below:

9.Match the LIST-I with LIST-II:

10.The steady-state error of a Type 1 system for a unit step input is:

11.Assertion (A): Feedback control systems offer more accurate control over open-loop systems. Reason (R): Feedback establishes a link for input-output comparison and correction.

12.For a chemical reaction A $\rightleftharpoons$ B, the necessary conditions for the state of equilibrium is/are, A. \(C_{A}=C_{B}\) B. \(\mu_{A}=\mu_{B}\) C. \(P_{A}=P_{B}\) D. \(G_{A}=G_{B}\) E. \(H_{A}=H_{B}\) Choose the correct answer from the options given below:

13.Please choose correct option. A. Cellulose is not digested by human. B. Reaction equilibrium is shifted by enzymes. C. Aerobic conditions are responsible for TCA cycle. D. Branched polymer chain of glucose in plants is glycogen. Choose the correct answer from the options given below:

14.According to Nyquist stability criterion, the number of unstable closed-loop poles (Z) is equal to:

15.Assertion (A): With lag-lead compensator, the bandwidth of the system is not affected much. Reason (R): The effect of lag and lead compensation at high frequencies cancel one another.

Comments

SUBSCRIBE TO OUR NEWS LETTER

1.
A minimum phase unity feedback system has slope $-20\,dB/decade$ for all frequencies. The value of maximum phase margin is:

2.
Which of the following are listed as types of compensators for system design? A. Lead compensators B. Stepper motors C. Lag compensators D. Servo valves

4.
Consider the following frequency domain specifications required to design a control system:
A. Bandwidth
B. Gain margin
C. Phase margin
D. Maximum overshoot
Choose the correct answer:

5.
Arrange correct sequence of time domain specifications of a second order system in ascending order of values: A. Rise time B. Settling time C. Delay time D. Peak time

6.
Arrange the following based on enthalpy content at $100^{\circ}C$ per kg of water.
A. Saturated vapor
B. Superheated vapor
C. Vapor with 95% quality
D. Enthalpy of vaporization
Choose the correct answer from the options given below:

7.
Match List-I with List-II (Compensation vs Characteristics).

8.
The thermoplastics polymers differ from thermosetting polymers by
A. High tensile strength
B. 3-D chain structure
C. Linear/branched chains
D. Reprocessibility
Choose the correct answer from the options given below:

9.
Match the LIST-I with LIST-II:

10.
The steady-state error of a Type 1 system for a unit step input is:

11.
Assertion (A): Feedback control systems offer more accurate control over open-loop systems. Reason (R): Feedback establishes a link for input-output comparison and correction.

12.
For a chemical reaction A $\rightleftharpoons$ B, the necessary conditions for the state of equilibrium is/are,
A. \(C_{A}=C_{B}\)
B. \(\mu_{A}=\mu_{B}\)
C. \(P_{A}=P_{B}\)
D. \(G_{A}=G_{B}\)
E. \(H_{A}=H_{B}\)
Choose the correct answer from the options given below:

13.
Please choose correct option.
A. Cellulose is not digested by human.
B. Reaction equilibrium is shifted by enzymes.
C. Aerobic conditions are responsible for TCA cycle.
D. Branched polymer chain of glucose in plants is glycogen.
Choose the correct answer from the options given below:

14.
According to Nyquist stability criterion, the number of unstable closed-loop poles (Z) is equal to:

15.
Assertion (A): With lag-lead compensator, the bandwidth of the system is not affected much. Reason (R): The effect of lag and lead compensation at high frequencies cancel one another.