The Official MHT-CET Cutoff 2025 for TERNA Nerul has not been released yet. However, students can refer to the expected MHT-CET 2025 cutoff for TERNA Nerul, which is based on the trends observed in previous years cutoff.
TERNA Nerul MHT-CET Cutoff 2025 (Category Wise)
TERNA Nerul MHT-CET 2025 Expected Cutoff for GOBCH Category ranges between 1.22 - 92.12. For Round 1, TERNA Nerul MHT-CET 2025 is expected to be 6.19-92.12.
| Category | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| GOBCH | 6.19-92.12 | 1.22-92.12 |
| GOBCO | 5.66-89.51 | 1.22-89.51 |
| GOPENH | 2.38-93.54 | 2.38-95.85 |
| GOPENO | 6.74-91.36 | 6.74-91.9 |
| GSCH | 3.22-88.99 | 2.47-94.29 |
| GSEBCH | 15.6-89.82 | 15.6-89.82 |
| LOBCH | 51.14-91.7 | 26.93-93.56 |
| LOPENH | 13.5-93.48 | 2.68-95.58 |
| LOPENO | 14.95-97.1 | 10.15-97.1 |
| LSCH | 11.88-90.67 | 11.88-90.77 |
| TFWS | 63.56-95.08 | 61.52-95.95 |
| EWS | 3-90.62 | 3-91.35 |
| GNT2H | 8.81-92.27 | 8.81-92.27 |
| GSCO | 3.19-86.2 | 3.19-88.2 |
| LSEBCH | 36.12-91.65 | 36.04-91.65 |
| GSEBCO | 44.26-90.14 | 44.26-90.14 |
| GVJH | 7.52-87.57 | 7.52-87.57 |
| LOBCO | 5.48-90.16 | 0.81-90.16 |
| DEFOPENS | 3.04-93.05 | 3.04-93.05 |
| GNT3H | 6.43-91.29 | 6.43-91.29 |
| GNT1H | 34.18-90.53 | 12.76-92.64 |
| GSTH | 10.85-74.28 | 10.85-88.25 |
| LSCO | 4.23-88.19 | 4.23-88.19 |
| GNT2O | 16.86-89.56 | 5.56-89.56 |
| GSTO | 16.74-71.66 | 9.75-79.98 |
| LNT2H | 38.78-91.01 | 38.78-91.01 |
| GNT3O | 1.77-89.84 | 1.77-89.84 |
| GVJO | 52.09-83.49 | 25.67-83.49 |
| LNT1H | 34.81-90.02 | 7.32-90.02 |
| LSTH | 18.79-72.1 | 18.79-81.77 |
| LSTO | 11.95-49.4 | 11.95-70.5 |
| LVJH | 52.36-82.42 | 28.3-82.42 |
| DEFOBCS | 55.49-79.47 | 55.49-84.09 |
| DEFSCS | 39.67-39.67 | 39.67-87.32 |
| LNT3H | 79.72-90.05 | 79.72-90.05 |
| LVJO | 39.54-65.42 | 39.54-65.42 |
| LSEBCO | 15.95-88.7 | 15.95-89.27 |
| GNT1O | 13.24-81.28 | 13.24-81.28 |
| LNT3O | 19.37-69.46 | 19.37-69.46 |
| LNT2O | 62.4-83.51 | 13.6-83.51 |
| DEFROBCS | 43.96-79.94 | 37.73-79.94 |
| LNT1O | 42.42-83.51 | 18.41-83.51 |
| PWDOPENH | 4.23-75.15 | 4.23-92.84 |
| ORPHAN | - | 79.72-92.89 |
| PWDOBCH | - | 76.62-91.55 |
| PWDSCH | 46.37-46.37 | 46.37-88.55 |
| AI | 23.5-23.5 | 23.5-59.53 |
| GNT1S | 21-21 | 21-21 |
| GOBCS | 48-48 | 48-48 |
| GOPENS | 39.5-39.5 | 39.5-39.5 |
| GSCS | 24-24 | 24-24 |
| LOBCS | 57.5-57.5 | 57.5-57.5 |
| LOPENS | 61-61 | 61-61 |
| DEFRSCS | 65.96-65.96 | 65.96-65.96 |
Also Check:
TERNA Nerul MHT-CET Cutoff 2025 (Course Wise)
TERNA Nerul MHT-CET Cutoff 2025 for GOBCH Category
BE Computer Engineering Cutoff for MHT-CET (GOBCH Category) expected to fall in the range between 85.89-92.12, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOBCH Category with expected range of 85.79-91.55. You can check course wise expected MHT-CET 2025 cutoff for GOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 87.3-92.12 | 85.89-92.12 |
| BE (Information Technology) | 85.79-91.55 | 85.79-91.55 |
| BE Artificial Intelligence and Data Science | 83.97-91.65 | 82.17-91.65 |
| BE Electronics & Telecom Engineering | 51.89-83.34 | 32.2-83.34 |
| BE Electronics Engineering | 17.65-76.9 | 17.65-76.9 |
| BE Mechatronics Engineering | 30.3-74.68 | 17.03-81.97 |
| BE Mechanical Engineering | 6.19-79.03 | 6.19-79.03 |
| BE Civil Engineering | 7.26-66.9 | 1.22-66.9 |
TERNA Nerul MHT-CET Cutoff 2025 for GOBCO Category
BE (Information Technology) Cutoff for MHT-CET (GOBCO Category) expected to fall in the range between 80.08-88.96, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GOBCO Category with expected range of 79.78-89.17. You can check course wise expected MHT-CET 2025 cutoff for GOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 80.08-88.96 | 80.08-88.96 |
| BE Computer Engineering | 82.44-89.17 | 79.78-89.17 |
| BE Artificial Intelligence and Data Science | 66.14-89.51 | 66.14-89.51 |
| BE Mechanical Engineering | 33.82-69.1 | 33.82-69.1 |
| BE Electronics & Telecom Engineering | 37.38-83.79 | 23.37-83.79 |
| BE Electronics Engineering | 14.93-70.5 | 6.19-75.65 |
| BE Mechatronics Engineering | 5.66-77.95 | 5.66-86.68 |
| BE Civil Engineering | 34.27-80 | 1.22-80 |
TERNA Nerul MHT-CET Cutoff 2025 for GOPENH Category
BE Computer Engineering Cutoff for MHT-CET (GOPENH Category) expected to fall in the range between 89.16-93.82, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENH Category with expected range of 85.76-95.85. You can check course wise expected MHT-CET 2025 cutoff for GOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.97-93.54 | 89.16-93.82 |
| BE (Information Technology) | 90.52-92.38 | 85.76-95.85 |
| BE Artificial Intelligence and Data Science | 89.4-93.09 | 85.27-93.63 |
| BE Electronics & Telecom Engineering | 80.04-85.96 | 48.97-85.96 |
| BE Mechatronics Engineering | 16.57-81.13 | 16.57-84.64 |
| BE Electronics Engineering | 59.72-82.55 | 7.73-84.34 |
| BE Civil Engineering | 45.64-82.84 | 2.7-82.84 |
| BE Mechanical Engineering | 2.38-83.07 | 2.38-83.07 |
TERNA Nerul MHT-CET Cutoff 2025 for GOPENO Category
BE Computer Engineering Cutoff for MHT-CET (GOPENO Category) expected to fall in the range between 83.34-91.9, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENO Category with expected range of 80.22-91.36. You can check course wise expected MHT-CET 2025 cutoff for GOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 83.98-90.36 | 83.34-91.9 |
| BE (Information Technology) | 80.23-91.36 | 80.22-91.36 |
| BE Artificial Intelligence and Data Science | 69.71-89.85 | 69.71-91.29 |
| BE Electronics & Telecom Engineering | 44.86-86.39 | 31.35-86.39 |
| BE Mechatronics Engineering | 24.87-78.62 | 21.23-78.62 |
| BE Electronics Engineering | 26.93-82.83 | 14.51-82.83 |
| BE Civil Engineering | 11.4-83.72 | 11.4-83.72 |
| BE Mechanical Engineering | 6.74-77.13 | 6.74-78.27 |
TERNA Nerul MHT-CET Cutoff 2025 for GSCH Category
BE Computer Engineering Cutoff for MHT-CET (GSCH Category) expected to fall in the range between 83.69-88.78, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSCH Category with expected range of 83.07-88.99. You can check course wise expected MHT-CET 2025 cutoff for GSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 83.69-88.78 | 83.69-88.78 |
| BE (Information Technology) | 83.07-88.99 | 83.07-88.99 |
| BE Artificial Intelligence and Data Science | 78.17-88.56 | 78.17-94.29 |
| BE Electronics & Telecom Engineering | 52.82-78.2 | 26.69-78.2 |
| BE Electronics Engineering | 30.33-73.47 | 25.04-73.47 |
| BE Civil Engineering | 29.93-66.38 | 22.97-66.38 |
| BE Mechanical Engineering | 3.22-75.61 | 3.22-75.61 |
| BE Mechatronics Engineering | 14.22-66.39 | 2.47-68.91 |
TERNA Nerul MHT-CET Cutoff 2025 for GSEBCH Category
BE Artificial Intelligence and Data Science Cutoff for MHT-CET (GSEBCH Category) expected to fall in the range between 88.44-89.82, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GSEBCH Category with expected range of 88.25-89.68. You can check course wise expected MHT-CET 2025 cutoff for GSEBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Artificial Intelligence and Data Science | 88.44-89.82 | 88.44-89.82 |
| BE Computer Engineering | 89.14-89.68 | 88.25-89.68 |
| BE (Information Technology) | 87.41-88.78 | 86.23-88.78 |
| BE Electronics & Telecom Engineering | 66.85-73.47 | 66.85-73.47 |
| BE Civil Engineering | 58.12-61.68 | 55.88-61.68 |
| BE Electronics Engineering | 52.52-66.43 | 50.7-66.43 |
| BE Mechatronics Engineering | 47.36-47.36 | 47.36-55.49 |
| BE Mechanical Engineering | 15.6-64.26 | 15.6-75.17 |
TERNA Nerul MHT-CET Cutoff 2025 for LOBCH Category
BE Computer Engineering Cutoff for MHT-CET (LOBCH Category) expected to fall in the range between 83.12-93.56, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOBCH Category with expected range of 82.52-91.61. You can check course wise expected MHT-CET 2025 cutoff for LOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 86.65-91.7 | 83.12-93.56 |
| BE (Information Technology) | 84.78-91.26 | 82.52-91.61 |
| BE Artificial Intelligence and Data Science | 72.57-91.31 | 72.57-92.09 |
| BE Mechatronics Engineering | 76.9-76.9 | 62.92-76.9 |
| BE Mechanical Engineering | 60.25-60.25 | 50.59-60.25 |
| BE Electronics Engineering | 66.95-78.62 | 35.66-78.62 |
| BE Civil Engineering | 64.35-64.35 | 29.23-64.35 |
| BE Electronics & Telecom Engineering | 51.14-83.21 | 26.93-84.62 |
TERNA Nerul MHT-CET Cutoff 2025 for LOPENH Category
BE Computer Engineering Cutoff for MHT-CET (LOPENH Category) expected to fall in the range between 89.69-95.58, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOPENH Category with expected range of 85.25-94.9. You can check course wise expected MHT-CET 2025 cutoff for LOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 90.02-93.48 | 89.69-95.58 |
| BE (Information Technology) | 88.75-92.63 | 85.25-94.9 |
| BE Artificial Intelligence and Data Science | 83.51-93.03 | 77.21-93.18 |
| BE Electronics & Telecom Engineering | 65.58-86.97 | 52.01-86.97 |
| BE Civil Engineering | 32.1-66.95 | 32.1-66.95 |
| BE Mechanical Engineering | 13.5-75.36 | 11.15-75.36 |
| BE Electronics Engineering | 42.8-85.54 | 10.51-85.54 |
| BE Mechatronics Engineering | 20.57-78.27 | 2.68-78.27 |
TERNA Nerul MHT-CET Cutoff 2025 for LOPENO Category
BE Computer Engineering Cutoff for MHT-CET (LOPENO Category) expected to fall in the range between 77.8-91.15, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LOPENO Category with expected range of 76.48-97.1. You can check course wise expected MHT-CET 2025 cutoff for LOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 79.36-91.15 | 77.8-91.15 |
| BE Artificial Intelligence and Data Science | 82.37-97.1 | 76.48-97.1 |
| BE (Information Technology) | 69.66-90.65 | 69.66-90.65 |
| BE Mechanical Engineering | 53.77-65.31 | 53.77-66.43 |
| BE Mechatronics Engineering | 27.4-68.4 | 21.22-68.4 |
| BE Electronics Engineering | 19.1-76.93 | 19.1-76.93 |
| BE Electronics & Telecom Engineering | 14.95-86.72 | 14.95-86.72 |
| BE Civil Engineering | 18.17-72.1 | 10.15-87.3 |
TERNA Nerul MHT-CET Cutoff 2025 for LSCH Category
BE Computer Engineering Cutoff for MHT-CET (LSCH Category) expected to fall in the range between 81.45-90.77, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSCH Category with expected range of 79.36-87.32. You can check course wise expected MHT-CET 2025 cutoff for LSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 81.45-90.67 | 81.45-90.77 |
| BE (Information Technology) | 79.36-87.32 | 79.36-87.32 |
| BE Artificial Intelligence and Data Science | 47.89-89.48 | 47.89-89.48 |
| BE Mechatronics Engineering | 56.29-56.29 | 32.83-56.29 |
| BE Electronics & Telecom Engineering | 33.79-79.75 | 23.64-79.75 |
| BE Civil Engineering | 47.46-65.63 | 18.56-65.63 |
| BE Electronics Engineering | 21.88-77.16 | 14.79-77.16 |
| BE Mechanical Engineering | 11.88-72.14 | 11.88-72.14 |
TERNA Nerul MHT-CET Cutoff 2025 for TFWS Category
BE Computer Engineering Cutoff for MHT-CET (TFWS Category) expected to fall in the range between 92.95-95.95, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for TFWS Category with expected range of 91.73-94.65. You can check course wise expected MHT-CET 2025 cutoff for TFWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 92.95-95.08 | 92.95-95.95 |
| BE (Information Technology) | 91.73-94.65 | 91.73-94.65 |
| BE Artificial Intelligence and Data Science | 87.94-94.04 | 87.94-94.04 |
| BE Mechanical Engineering | 84.64-84.64 | 84.64-92.45 |
| BE Electronics & Telecom Engineering | 76.99-85.96 | 76.99-90.84 |
| BE Mechatronics Engineering | 72.47-85.51 | 71.58-85.51 |
| BE Electronics Engineering | 81.23-84.04 | 67.71-84.04 |
| BE Civil Engineering | 63.56-78.88 | 61.52-81.94 |
TERNA Nerul MHT-CET Cutoff 2025 for EWS Category
BE Artificial Intelligence and Data Science Cutoff for MHT-CET (EWS Category) expected to fall in the range between 78.92-91.35, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for EWS Category with expected range of 65.52-90.62. You can check course wise expected MHT-CET 2025 cutoff for EWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Artificial Intelligence and Data Science | 78.92-88.8 | 78.92-91.35 |
| BE Computer Engineering | 77.13-90.62 | 65.52-90.62 |
| BE (Information Technology) | 69.33-88.99 | 65.31-89.97 |
| BE Electronics & Telecom Engineering | 25.06-68.81 | 22.5-75.65 |
| BE Electronics Engineering | 21.62-50.27 | 21.62-50.27 |
| BE Civil Engineering | 11.59-53.91 | 11.59-82.44 |
| BE Mechatronics Engineering | 13.24-69.16 | 7.79-69.16 |
| BE Mechanical Engineering | 3-26.9 | 3-71.58 |
TERNA Nerul MHT-CET Cutoff 2025 for GNT2H Category
BE Computer Engineering Cutoff for MHT-CET (GNT2H Category) expected to fall in the range between 85.83-92.27, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT2H Category with expected range of 80.91-90.6. You can check course wise expected MHT-CET 2025 cutoff for GNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 86.22-92.27 | 85.83-92.27 |
| BE (Information Technology) | 85.83-90.6 | 80.91-90.6 |
| BE Artificial Intelligence and Data Science | 80.76-91.85 | 80.76-91.85 |
| BE Mechanical Engineering | 63.07-63.07 | 63.07-63.07 |
| BE Electronics & Telecom Engineering | 55.49-80.74 | 41.62-80.74 |
| BE Electronics Engineering | 63.97-72.38 | 39.91-75.61 |
| BE Mechatronics Engineering | 8.87-57.62 | 8.87-72.15 |
| BE Civil Engineering | 8.81-78.42 | 8.81-78.42 |
TERNA Nerul MHT-CET Cutoff 2025 for GSCO Category
BE (Information Technology) Cutoff for MHT-CET (GSCO Category) expected to fall in the range between 75.9-88.2, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GSCO Category with expected range of 72.59-85.81. You can check course wise expected MHT-CET 2025 cutoff for GSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 75.9-83.21 | 75.9-88.2 |
| BE Computer Engineering | 80.22-85.81 | 72.59-85.81 |
| BE Artificial Intelligence and Data Science | 53.66-86.2 | 45.46-86.2 |
| BE Electronics Engineering | 26.01-71.4 | 26.01-71.4 |
| BE Electronics & Telecom Engineering | 35.43-75.4 | 17.22-75.4 |
| BE Mechatronics Engineering | 32.31-42.22 | 10.02-42.22 |
| BE Mechanical Engineering | 8.72-56.5 | 8.72-57.4 |
| BE Civil Engineering | 3.19-57.4 | 3.19-57.4 |
TERNA Nerul MHT-CET Cutoff 2025 for LSEBCH Category
BE Computer Engineering Cutoff for MHT-CET (LSEBCH Category) expected to fall in the range between 88.5-90.99, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSEBCH Category with expected range of 86.71-89.06. You can check course wise expected MHT-CET 2025 cutoff for LSEBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 90.5-90.99 | 88.5-90.99 |
| BE (Information Technology) | 87.3-89.06 | 86.71-89.06 |
| BE Artificial Intelligence and Data Science | 89.21-91.65 | 84.85-91.65 |
| BE Electronics & Telecom Engineering | 75.49-78.56 | 75.49-82.48 |
| BE Electronics Engineering | 73.75-73.75 | 73.75-73.75 |
| BE Civil Engineering | 50.32-50.32 | 50.32-72.5 |
| BE Mechanical Engineering | 36.12-56.85 | 36.12-72.78 |
| BE Mechatronics Engineering | - | 36.04-36.04 |
TERNA Nerul MHT-CET Cutoff 2025 for GSEBCO Category
BE Computer Engineering Cutoff for MHT-CET (GSEBCO Category) expected to fall in the range between 84.83-90.14, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSEBCO Category with expected range of 84.24-84.24. You can check course wise expected MHT-CET 2025 cutoff for GSEBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 90.14-90.14 | 84.83-90.14 |
| BE (Information Technology) | - | 84.24-84.24 |
| BE Artificial Intelligence and Data Science | 89.04-89.04 | 81.77-89.04 |
| BE Electronics & Telecom Engineering | 79.03-79.03 | 75.22-79.99 |
| BE Mechanical Engineering | 61.8-61.8 | 56.5-61.8 |
| BE Civil Engineering | 60.32-60.32 | 47.42-69.1 |
| BE Electronics Engineering | 44.26-44.26 | 44.26-44.26 |
TERNA Nerul MHT-CET Cutoff 2025 for GVJH Category
BE Computer Engineering Cutoff for MHT-CET (GVJH Category) expected to fall in the range between 73.44-86, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GVJH Category with expected range of 68.47-81.37. You can check course wise expected MHT-CET 2025 cutoff for GVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 75.67-86 | 73.44-86 |
| BE (Information Technology) | 68.47-81.05 | 68.47-81.37 |
| BE Electronics & Telecom Engineering | 55.49-70.39 | 49.62-70.39 |
| BE Artificial Intelligence and Data Science | 44.86-87.57 | 44.86-87.57 |
| BE Mechanical Engineering | - | 42.22-42.22 |
| BE Mechatronics Engineering | 19.14-74.98 | 19.14-74.98 |
| BE Electronics Engineering | 19.12-70.62 | 19.12-70.62 |
| BE Civil Engineering | 7.52-7.52 | 7.52-7.52 |
TERNA Nerul MHT-CET Cutoff 2025 for LOBCO Category
BE Computer Engineering Cutoff for MHT-CET (LOBCO Category) expected to fall in the range between 69.04-90.02, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOBCO Category with expected range of 63.94-86.85. You can check course wise expected MHT-CET 2025 cutoff for LOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 72.89-90.02 | 69.04-90.02 |
| BE (Information Technology) | 63.94-86.85 | 63.94-86.85 |
| BE Artificial Intelligence and Data Science | 72.88-90.16 | 59.68-90.16 |
| BE Electronics & Telecom Engineering | 47.77-85.06 | 39.16-85.06 |
| BE Mechatronics Engineering | 36.12-36.12 | 36.12-36.12 |
| BE Electronics Engineering | 16.58-72.5 | 16.58-72.5 |
| BE Mechanical Engineering | 5.48-57.82 | 5.48-57.82 |
| BE Civil Engineering | 57.44-57.44 | 0.81-57.44 |
TERNA Nerul MHT-CET Cutoff 2025 for DEFOPENS Category
BE Computer Engineering Cutoff for MHT-CET (DEFOPENS Category) expected to fall in the range between 78.92-89.27, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for DEFOPENS Category with expected range of 76.68-91.05. You can check course wise expected MHT-CET 2025 cutoff for DEFOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 83.12-86.65 | 78.92-89.27 |
| BE (Information Technology) | 78.58-91.05 | 76.68-91.05 |
| BE Artificial Intelligence and Data Science | 63.65-93.05 | 63.65-93.05 |
| BE Mechatronics Engineering | 50.1-50.1 | 50.1-73.8 |
| BE Electronics & Telecom Engineering | 60.5-72.74 | 43.03-72.74 |
| BE Electronics Engineering | 21.35-21.35 | 21.35-81.97 |
| BE Mechanical Engineering | 46.37-72.67 | 8.82-72.67 |
| BE Civil Engineering | 3.04-3.04 | 3.04-83.88 |
TERNA Nerul MHT-CET Cutoff 2025 for GNT3H Category
BE Computer Engineering Cutoff for MHT-CET (GNT3H Category) expected to fall in the range between 86.27-91.29, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT3H Category with expected range of 81.61-86.68. You can check course wise expected MHT-CET 2025 cutoff for GNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.08-91.29 | 86.27-91.29 |
| BE (Information Technology) | 85.58-86.68 | 81.61-86.68 |
| BE Electronics & Telecom Engineering | 59.73-78.19 | 59.73-78.19 |
| BE Artificial Intelligence and Data Science | 80.76-86.05 | 56.56-86.05 |
| BE Civil Engineering | 22.48-36.08 | 22.48-60.97 |
| BE Electronics Engineering | 6.43-73.89 | 6.43-73.89 |
TERNA Nerul MHT-CET Cutoff 2025 for GNT1H Category
BE Computer Engineering Cutoff for MHT-CET (GNT1H Category) expected to fall in the range between 83.34-92.64, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for GNT1H Category with expected range of 75.16-75.16. You can check course wise expected MHT-CET 2025 cutoff for GNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 85.16-90.53 | 83.34-92.64 |
| BE Mechanical Engineering | 75.16-75.16 | 75.16-75.16 |
| BE Artificial Intelligence and Data Science | 73.44-88.5 | 73.44-88.5 |
| BE (Information Technology) | 83.24-90.29 | 73.41-90.29 |
| BE Electronics Engineering | 62.87-69.3 | 32.56-69.3 |
| BE Electronics & Telecom Engineering | 48.93-80.79 | 23.7-80.79 |
| BE Mechatronics Engineering | 34.18-34.18 | 12.76-34.18 |
TERNA Nerul MHT-CET Cutoff 2025 for GSTH Category
BE Mechatronics Engineering Cutoff for MHT-CET (GSTH Category) expected to fall in the range between 70.87-74.01, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSTH Category with expected range of 49.22-88.25. You can check course wise expected MHT-CET 2025 cutoff for GSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechatronics Engineering | - | 70.87-74.01 |
| BE (Information Technology) | 49.22-74.11 | 49.22-88.25 |
| BE Civil Engineering | - | 44.37-75.36 |
| BE Electronics & Telecom Engineering | 27.15-27.15 | 27.15-80.43 |
| BE Mechanical Engineering | 25.78-25.78 | 25.78-75.19 |
| BE Artificial Intelligence and Data Science | 22.88-74.28 | 22.88-74.28 |
| BE Computer Engineering | 14.92-55.3 | 14.92-67.15 |
| BE Electronics Engineering | 10.85-10.85 | 10.85-79.7 |
TERNA Nerul MHT-CET Cutoff 2025 for LSCO Category
BE (Information Technology) Cutoff for MHT-CET (LSCO Category) expected to fall in the range between 65.58-78.42, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LSCO Category with expected range of 59.73-80.97. You can check course wise expected MHT-CET 2025 cutoff for LSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 65.58-78.42 | 65.58-78.42 |
| BE Artificial Intelligence and Data Science | 59.73-80.97 | 59.73-80.97 |
| BE Electronics & Telecom Engineering | 38.56-80.36 | 38.56-80.36 |
| BE Civil Engineering | 25.78-25.78 | 25.78-25.78 |
| BE Mechatronics Engineering | 16.52-42.16 | 16.52-53.77 |
| BE Computer Engineering | 52.01-88.19 | 10.55-88.19 |
| BE Electronics Engineering | 4.23-4.23 | 4.23-62.4 |
TERNA Nerul MHT-CET Cutoff 2025 for GNT2O Category
BE Computer Engineering Cutoff for MHT-CET (GNT2O Category) expected to fall in the range between 76.55-89.56, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GNT2O Category with expected range of 63.05-63.05. You can check course wise expected MHT-CET 2025 cutoff for GNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 76.55-89.56 | 76.55-89.56 |
| BE Artificial Intelligence and Data Science | 63.05-63.05 | 63.05-63.05 |
| BE Electronics Engineering | - | 31.5-31.5 |
| BE Mechanical Engineering | 16.86-52.2 | 16.86-52.2 |
| BE Electronics & Telecom Engineering | 22.91-79.37 | 5.56-79.37 |
TERNA Nerul MHT-CET Cutoff 2025 for GSTO Category
BE Mechanical Engineering Cutoff for MHT-CET (GSTO Category) expected to fall in the range between 76.27-76.27, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSTO Category with expected range of 74.97-79.98. You can check course wise expected MHT-CET 2025 cutoff for GSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechanical Engineering | - | 76.27-76.27 |
| BE Electronics & Telecom Engineering | - | 74.97-79.98 |
| BE (Information Technology) | 39.44-55.49 | 39.44-55.49 |
| BE Electronics Engineering | 29.04-29.04 | 29.04-77.16 |
| BE Artificial Intelligence and Data Science | 27.33-71.66 | 27.33-71.66 |
| BE Civil Engineering | 16.74-16.74 | 16.74-77.13 |
| BE Computer Engineering | 37.54-57.33 | 12.56-72.61 |
| BE Mechatronics Engineering | - | 9.75-70.75 |
TERNA Nerul MHT-CET Cutoff 2025 for LNT2H Category
BE Computer Engineering Cutoff for MHT-CET (LNT2H Category) expected to fall in the range between 83.47-91.01, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LNT2H Category with expected range of 80.97-81.4. You can check course wise expected MHT-CET 2025 cutoff for LNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 87.64-91.01 | 83.47-91.01 |
| BE Artificial Intelligence and Data Science | 81.4-81.4 | 80.97-81.4 |
| BE Mechanical Engineering | 71.17-71.17 | 49.4-71.17 |
| BE Electronics & Telecom Engineering | 61.69-66.17 | 41.09-66.17 |
| BE Electronics Engineering | 38.78-38.78 | 38.78-49.79 |
TERNA Nerul MHT-CET Cutoff 2025 for GNT3O Category
BE (Information Technology) Cutoff for MHT-CET (GNT3O Category) expected to fall in the range between 83.56-83.56, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GNT3O Category with expected range of 69.66-89.84. You can check course wise expected MHT-CET 2025 cutoff for GNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 83.56-83.56 | 83.56-83.56 |
| BE Computer Engineering | 69.66-89.84 | 69.66-89.84 |
| BE Mechanical Engineering | 60.42-60.42 | 57.01-60.42 |
| BE Electronics & Telecom Engineering | 27.77-69.27 | 8.18-69.27 |
| BE Civil Engineering | 1.77-1.77 | 1.77-42.88 |
TERNA Nerul MHT-CET Cutoff 2025 for GVJO Category
BE (Information Technology) Cutoff for MHT-CET (GVJO Category) expected to fall in the range between 76.92-80.08, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GVJO Category with expected range of 73.64-83.49. You can check course wise expected MHT-CET 2025 cutoff for GVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 80.08-80.08 | 76.92-80.08 |
| BE Computer Engineering | 73.64-83.49 | 73.64-83.49 |
| BE Mechanical Engineering | - | 35.38-35.38 |
| BE Electronics & Telecom Engineering | 57.73-78.17 | 31.5-78.17 |
| BE Civil Engineering | 52.09-52.09 | 25.67-52.09 |
TERNA Nerul MHT-CET Cutoff 2025 for LNT1H Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LNT1H Category) expected to fall in the range between 63.82-66.43, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LNT1H Category with expected range of 62.3-85.75. You can check course wise expected MHT-CET 2025 cutoff for LNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 66.43-66.43 | 63.82-66.43 |
| BE Artificial Intelligence and Data Science | 62.3-85.75 | 62.3-85.75 |
| BE Computer Engineering | 81.98-90.02 | 53.93-90.02 |
| BE Civil Engineering | 34.81-34.81 | 11.66-56.96 |
| BE Mechatronics Engineering | - | 7.32-7.32 |
TERNA Nerul MHT-CET Cutoff 2025 for LSTH Category
BE Civil Engineering Cutoff for MHT-CET (LSTH Category) expected to fall in the range between 81.77-81.77, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for LSTH Category with expected range of 81.13-81.13. You can check course wise expected MHT-CET 2025 cutoff for LSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Civil Engineering | - | 81.77-81.77 |
| BE Mechanical Engineering | - | 81.13-81.13 |
| BE Electronics & Telecom Engineering | - | 80.36-81.37 |
| BE Electronics Engineering | - | 79.19-79.19 |
| BE Mechatronics Engineering | - | 69.81-69.81 |
| BE Computer Engineering | 41.84-72.1 | 36.23-72.1 |
| BE Artificial Intelligence and Data Science | 50.56-50.56 | 25.78-50.56 |
| BE (Information Technology) | 18.79-71.85 | 18.79-71.85 |
TERNA Nerul MHT-CET Cutoff 2025 for LSTO Category
BE Mechanical Engineering Cutoff for MHT-CET (LSTO Category) expected to fall in the range between 54.39-70.5, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSTO Category with expected range of 33.62-49.4. You can check course wise expected MHT-CET 2025 cutoff for LSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechanical Engineering | - | 54.39-70.5 |
| BE (Information Technology) | 49.4-49.4 | 33.62-49.4 |
| BE Civil Engineering | - | 32.25-33.56 |
| BE Computer Engineering | 11.95-31.65 | 11.95-31.65 |
TERNA Nerul MHT-CET Cutoff 2025 for LVJH Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LVJH Category) expected to fall in the range between 54.18-54.18, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LVJH Category with expected range of 54.09-82.42. You can check course wise expected MHT-CET 2025 cutoff for LVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 54.18-54.18 | 54.18-54.18 |
| BE Computer Engineering | 54.09-82.42 | 54.09-82.42 |
| BE Artificial Intelligence and Data Science | 52.36-52.36 | 52.36-52.36 |
| BE Mechatronics Engineering | - | 28.3-54.59 |
TERNA Nerul MHT-CET Cutoff 2025 for DEFOBCS Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (DEFOBCS Category) expected to fall in the range between 81.98-84.09, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for DEFOBCS Category with expected range of 55.49-79.47. You can check course wise expected MHT-CET 2025 cutoff for DEFOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 81.98-84.09 |
| BE Computer Engineering | 55.49-79.47 | 55.49-79.47 |
TERNA Nerul MHT-CET Cutoff 2025 for DEFSCS Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (DEFSCS Category) expected to fall in the range between 50.1-79.91, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for DEFSCS Category with expected range of 39.67-87.32. You can check course wise expected MHT-CET 2025 cutoff for DEFSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 50.1-79.91 |
| BE Computer Engineering | 39.67-39.67 | 39.67-87.32 |
TERNA Nerul MHT-CET Cutoff 2025 for LNT3H Category
BE (Information Technology) Cutoff for MHT-CET (LNT3H Category) expected to fall in the range between 80.97-80.97, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LNT3H Category with expected range of 79.72-90.05. You can check course wise expected MHT-CET 2025 cutoff for LNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 80.97-80.97 | 80.97-80.97 |
| BE Computer Engineering | 79.72-90.05 | 79.72-90.05 |
TERNA Nerul MHT-CET Cutoff 2025 for LVJO Category
BE Computer Engineering Cutoff for MHT-CET (LVJO Category) expected to fall in the range between 65.42-65.42, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Civil Engineering is expected to be the second most preferred course for LVJO Category with expected range of 49.4-49.4. You can check course wise expected MHT-CET 2025 cutoff for LVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 65.42-65.42 | 65.42-65.42 |
| BE Civil Engineering | 49.4-49.4 | 49.4-49.4 |
| BE Mechanical Engineering | 63.2-63.2 | 43.47-64.35 |
| BE Artificial Intelligence and Data Science | 39.54-39.54 | 39.54-39.54 |
TERNA Nerul MHT-CET Cutoff 2025 for LSEBCO Category
BE Computer Engineering Cutoff for MHT-CET (LSEBCO Category) expected to fall in the range between 88.7-89.27, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSEBCO Category with expected range of 81.04-85.64. You can check course wise expected MHT-CET 2025 cutoff for LSEBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 88.7-88.7 | 88.7-89.27 |
| BE (Information Technology) | 85.64-85.64 | 81.04-85.64 |
| BE Electronics & Telecom Engineering | 50.1-83.34 | 43.12-83.34 |
| BE Electronics Engineering | 50.93-50.93 | 43.12-62.84 |
| BE Civil Engineering | 53.27-53.27 | 35.68-72.1 |
| BE Mechatronics Engineering | 15.95-15.95 | 15.95-15.95 |
TERNA Nerul MHT-CET Cutoff 2025 for GNT1O Category
BE (Information Technology) Cutoff for MHT-CET (GNT1O Category) expected to fall in the range between 78.33-81.28, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Electronics Engineering is expected to be the second most preferred course for GNT1O Category with expected range of 58.6-58.6. You can check course wise expected MHT-CET 2025 cutoff for GNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 78.33-81.28 | 78.33-81.28 |
| BE Electronics Engineering | 58.6-58.6 | 58.6-58.6 |
| BE Computer Engineering | 70.89-74.97 | 45.46-74.97 |
| BE Electronics & Telecom Engineering | 18.37-67.84 | 18.37-72.61 |
| BE Mechanical Engineering | 13.24-13.24 | 13.24-54.09 |
TERNA Nerul MHT-CET Cutoff 2025 for LNT3O Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LNT3O Category) expected to fall in the range between 69.46-69.46, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Mechatronics Engineering is expected to be the second most preferred course for LNT3O Category with expected range of 19.37-19.37. You can check course wise expected MHT-CET 2025 cutoff for LNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 69.46-69.46 | 69.46-69.46 |
| BE Mechatronics Engineering | 19.37-19.37 | 19.37-19.37 |
TERNA Nerul MHT-CET Cutoff 2025 for LNT2O Category
BE (Information Technology) Cutoff for MHT-CET (LNT2O Category) expected to fall in the range between 83.51-83.51, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LNT2O Category with expected range of 13.6-82.45. You can check course wise expected MHT-CET 2025 cutoff for LNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 83.51-83.51 | 83.51-83.51 |
| BE Artificial Intelligence and Data Science | 62.4-82.45 | 13.6-82.45 |
TERNA Nerul MHT-CET Cutoff 2025 for DEFROBCS Category
BE Artificial Intelligence and Data Science Cutoff for MHT-CET (DEFROBCS Category) expected to fall in the range between 50.86-50.86, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE (Information Technology) is expected to be the second most preferred course for DEFROBCS Category with expected range of 43.96-68.87. You can check course wise expected MHT-CET 2025 cutoff for DEFROBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Artificial Intelligence and Data Science | 50.86-50.86 | 50.86-50.86 |
| BE (Information Technology) | 43.96-68.87 | 43.96-68.87 |
| BE Computer Engineering | 68.56-79.94 | 37.73-79.94 |
TERNA Nerul MHT-CET Cutoff 2025 for LNT1O Category
BE Civil Engineering Cutoff for MHT-CET (LNT1O Category) expected to fall in the range between 69.22-69.22, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LNT1O Category with expected range of 18.41-83.51. You can check course wise expected MHT-CET 2025 cutoff for LNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Civil Engineering | 69.22-69.22 | 69.22-69.22 |
| BE Computer Engineering | 42.42-83.51 | 18.41-83.51 |
TERNA Nerul MHT-CET Cutoff 2025 for PWDOPENH Category
BE Mechatronics Engineering Cutoff for MHT-CET (PWDOPENH Category) expected to fall in the range between 82.78-85.11, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Electronics Engineering is expected to be the second most preferred course for PWDOPENH Category with expected range of 76.25-79.91. You can check course wise expected MHT-CET 2025 cutoff for PWDOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechatronics Engineering | - | 82.78-85.11 |
| BE Electronics Engineering | - | 76.25-79.91 |
| BE Civil Engineering | - | 75.49-81.21 |
| BE Mechanical Engineering | - | 75.36-76.27 |
| BE Artificial Intelligence and Data Science | 66.82-66.82 | 66.82-92.84 |
| BE Electronics & Telecom Engineering | 49.55-49.55 | 49.55-84.52 |
| BE (Information Technology) | 16.24-16.24 | 16.24-91.4 |
| BE Computer Engineering | 4.23-75.15 | 4.23-92.78 |
TERNA Nerul MHT-CET Cutoff 2025 for ORPHAN Category
BE Computer Engineering Cutoff for MHT-CET (ORPHAN Category) expected to fall in the range between 92.73-92.89, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for ORPHAN Category with expected range of 79.72-83.21. You can check course wise expected MHT-CET 2025 cutoff for ORPHAN Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 92.73-92.89 |
| BE Electronics & Telecom Engineering | - | 79.72-83.21 |
TERNA Nerul MHT-CET Cutoff 2025 for PWDOBCH Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (PWDOBCH Category) expected to fall in the range between 78.34-78.92, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for PWDOBCH Category with expected range of 76.62-91.55. You can check course wise expected MHT-CET 2025 cutoff for PWDOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 78.34-78.92 |
| BE Computer Engineering | - | 76.62-91.55 |
TERNA Nerul MHT-CET Cutoff 2025 for PWDSCH Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (PWDSCH Category) expected to fall in the range between 73.75-76.25, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Computer Engineering is expected to be the second most preferred course for PWDSCH Category with expected range of 46.37-88.55. You can check course wise expected MHT-CET 2025 cutoff for PWDSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 73.75-76.25 |
| BE Computer Engineering | 46.37-46.37 | 46.37-88.55 |
TERNA Nerul MHT-CET Cutoff 2025 for AI Category
BE Mechatronics Engineering Cutoff for MHT-CET (AI Category) expected to fall in the range between 59.53-59.53, which makes it the most in-demand course for TERNA Nerul. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for AI Category with expected range of 52.23-52.23. You can check course wise expected MHT-CET 2025 cutoff for AI Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechatronics Engineering | - | 59.53-59.53 |
| BE Mechanical Engineering | - | 52.23-52.23 |
| BE Civil Engineering | - | 46.17-46.17 |
| B.Des Industrial Design | 23.5-23.5 | 23.5-23.5 |
TERNA Nerul MHT-CET Cutoff 2025 for GNT1S Category
B.Des Industrial Design Cutoff for MHT-CET (GNT1S Category) expected to fall in the range between 21-21, which makes it the most in-demand course for TERNA Nerul. You can check course wise expected MHT-CET 2025 cutoff for GNT1S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| B.Des Industrial Design | 21-21 | 21-21 |
TERNA Nerul MHT-CET Cutoff 2025 for GOBCS Category
B.Des Industrial Design Cutoff for MHT-CET (GOBCS Category) expected to fall in the range between 48-48, which makes it the most in-demand course for TERNA Nerul. You can check course wise expected MHT-CET 2025 cutoff for GOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| B.Des Industrial Design | 48-48 | 48-48 |
TERNA Nerul MHT-CET Cutoff 2025 for GOPENS Category
B.Des Industrial Design Cutoff for MHT-CET (GOPENS Category) expected to fall in the range between 39.5-39.5, which makes it the most in-demand course for TERNA Nerul. You can check course wise expected MHT-CET 2025 cutoff for GOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| B.Des Industrial Design | 39.5-39.5 | 39.5-39.5 |
TERNA Nerul MHT-CET Cutoff 2025 for GSCS Category
B.Des Industrial Design Cutoff for MHT-CET (GSCS Category) expected to fall in the range between 24-24, which makes it the most in-demand course for TERNA Nerul. You can check course wise expected MHT-CET 2025 cutoff for GSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| B.Des Industrial Design | 24-24 | 24-24 |
TERNA Nerul MHT-CET Cutoff 2025 for LOBCS Category
B.Des Industrial Design Cutoff for MHT-CET (LOBCS Category) expected to fall in the range between 57.5-57.5, which makes it the most in-demand course for TERNA Nerul. You can check course wise expected MHT-CET 2025 cutoff for LOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| B.Des Industrial Design | 57.5-57.5 | 57.5-57.5 |
TERNA Nerul MHT-CET Cutoff 2025 for LOPENS Category
B.Des Industrial Design Cutoff for MHT-CET (LOPENS Category) expected to fall in the range between 61-61, which makes it the most in-demand course for TERNA Nerul. You can check course wise expected MHT-CET 2025 cutoff for LOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| B.Des Industrial Design | 61-61 | 61-61 |
TERNA Nerul MHT-CET Cutoff 2025 for DEFRSCS Category
BE Computer Engineering Cutoff for MHT-CET (DEFRSCS Category) expected to fall in the range between 65.96-65.96, which makes it the most in-demand course for TERNA Nerul. You can check course wise expected MHT-CET 2025 cutoff for DEFRSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 65.96-65.96 | 65.96-65.96 |
Also Check:
.png?h=16&w=16&mode=stretch)
![IIT Bombay - Indian Institute of Technology - [IITB]](https://image-static.collegedunia.com/public/college_data/images/appImage/25703_IIT_New.jpg?h=111.44&w=263&mode=stretch)
![Sardar Patel Institute of Technology - [SPIT]](https://image-static.collegedunia.com/public/college_data/images/appImage/14948_SPIT_APP.jpg?h=111.44&w=263&mode=stretch)
![Veermata Jijabai Technological Institute - [VJTI]](https://image-static.collegedunia.com/public/college_data/images/appImage/28202_1443441209VJTI_New.jpg?h=111.44&w=263&mode=stretch)
![Institute of Chemical Technology - [ICT]](https://image-static.collegedunia.com/public/college_data/images/appImage/1505131397cover.jpg?h=111.44&w=263&mode=stretch)
![Dwarkadas J Sanghvi College of Engineering - [DJSCE]](https://image-static.collegedunia.com/public/college_data/images/appImage/15644705771415625792h1.jpg?h=111.44&w=263&mode=stretch)
![Narsee Monjee Institute of Management Studies - [NMIMS Deemed to be University]](https://image-static.collegedunia.com/public/college_data/images/appImage/16147721421.jpg?h=111.44&w=263&mode=stretch)
![Vidyalankar Institute of Technology - [VIT]](https://image-static.collegedunia.com/public/college_data/images/logos/1613735561Logo.png?h=72&w=72&mode=stretch)
![A. C. Patil College of Engineering - [ACPCE]](https://image-static.collegedunia.com/public/college_data/images/logos/1745471804logo.png?h=72&w=72&mode=stretch)
![SIES Graduate School of Technology - [SIES-GST]](https://image-static.collegedunia.com/public/college_data/images/logos/1564729774gst.png?h=72&w=72&mode=stretch)
![Rajiv Gandhi Institute of Technology - [RGIT]](https://image-static.collegedunia.com/public/college_data/images/logos/col28044.png?h=72&w=72&mode=stretch)
![Mahatma Gandhi Mission's College of Engineering and Technology - [MGMCET]](https://image-static.collegedunia.com/public/college_data/images/logos/1478682461asdafrgt.png?h=72&w=72&mode=stretch)
![Thakur College of Engineering and Technology - [TCET]](https://image-static.collegedunia.com/public/college_data/images/logos/1472041787Capture.jpg?h=72&w=72&mode=stretch)
![Smt. Indira Gandhi College of Engineering - [SIGCE]](https://image-static.collegedunia.com/public/college_data/images/logos/1753161866Screenshot20250722105400.png?h=72&w=72&mode=stretch)
![Bharati Vidyapeeth College of Engineering - [BVCOE] Navi Mumbai](https://image-static.collegedunia.com/public/college_data/images/logos/1605876062images.png?h=72&w=72&mode=stretch)
![A. P. Shah Institute of Technology - [APSIT]](https://image-static.collegedunia.com/public/college_data/images/logos/1745320827Logo.jpg?h=72&w=72&mode=stretch)
![Saraswati College of Engineering - [SCOE]](https://image-static.collegedunia.com/public/college_data/images/logos/1683793077SaraswatiLogosquarefinal.jpg?h=72&w=72&mode=stretch)
![Shah and Anchor Kutchhi Engineering College - [SAKEC]](https://image-static.collegedunia.com/public/college_data/images/logos/1748520255m.jpg?h=72&w=72&mode=stretch)
![Lokmanya Tilak College of Engineering - [LTCE]](https://image-static.collegedunia.com/public/college_data/images/logos/1471353390lokmanyalogo.jpg?h=72&w=72&mode=stretch)
Comments