The Official MHT-CET Cutoff 2025 for D. Y. Patil College of Engineering Pune has not been released yet. However, students can refer to the expected MHT-CET 2025 cutoff for D. Y. Patil College of Engineering Pune, which is based on the trends observed in previous years cutoff.

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 (Category Wise)

D. Y. Patil College of Engineering Pune MHT-CET 2025 Expected Cutoff for EWS Category ranges between 4.81 - 97.59. For Round 1, D. Y. Patil College of Engineering Pune MHT-CET 2025 is expected to be 4.81-97.26.

Category Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
EWS 4.81-97.26 4.81-97.59
GOPENS 87.92-97.6 87.08-97.6
GSCS 76.36-92.97 76.36-92.97
LOPENS 87.45-97.5 82.78-97.5
DEFOPENS 17-95.33 17-97.28
GOBCS 85.34-97.44 85.07-97.44
GSTS 11.49-75.74 11.49-86.27
LOBCS 79.13-97.18 79.13-97.18
TFWS 77.53-98.11 77.53-98.11
LSCS 63.7-92.99 63.7-94.09
GNT2S 75.36-97.25 75.36-97.25
GNT1S 76.62-97 76.36-97
LNT2S 79.75-96.54 74.38-96.54
LNT3S 69.07-94.24 69.07-95.44
DEFOBCS 74.51-93.11 24.77-93.11
GVJS 80.63-93.28 80.63-93.28
PWDOPENS 44.51-65.55 26.13-94.69
LSTS 13.95-82.24 13.95-87.5
GNT3S 77.84-97.45 77.84-97.45
LVJS 52.03-90.44 52.03-90.44
LNT1S 92.19-93.9 87.5-93.9
DEFROBCS 30.95-93.45 30.95-93.45
PWDRNT1S 19.37-19.37 19.37-19.37
ORPHAN 51.28-51.28 51.28-97.04
DEFRNT3S 92.93-92.93 92.93-92.93
PWDOBCS 63.27-63.27 18.41-97.07
DEFSCS - 11.39-76.62
GNT2H 14.61-97.18 14.61-97.18
GOBCH 7.44-97.01 7.44-97.01
GOBCO 7.07-97.72 7.07-97.72
GOPENH 43.3-97.34 1.92-98.07
GOPENO 56.63-97.89 43.08-97.89
GSCH 8.38-92.12 3.18-93.95
GSCO 12.2-95.71 10.27-95.71
LOBCH 18.3-96.24 12.22-97.17
LOPENH 10.55-96.67 10.55-98.04
LOPENO 32.59-97.38 32.59-97.38
LSCH 1.82-90.57 1.82-90.57
GNT1H 26.72-96.28 26.72-96.28
GVJH 6.67-92.67 6.67-95.69
LOBCO 3.91-97.15 3.91-97.15
LSCO 7.44-92.83 7.44-92.83
GSTH 0.07-74.47 0.07-76.28
GSTO 0.44-85.15 0.44-85.15
GVJO 47.89-96.28 35.98-96.28
LNT2H 25.79-95.77 12.94-95.77
LVJH 32.31-88.28 17.69-88.28
DEFRSCS 23.95-83.35 0.66-86.45
LNT3H 85.19-92.67 85.19-92.67
LNT1O 71.27-86.34 71.27-86.7
LNT2O 91.7-92.18 91.7-92.18
LNT3O 84.4-84.4 84.4-84.4
GNT3H 12.93-95.79 6.8-95.79
GNT1O 2.58-97.33 2.58-97.33
LSTH 2.3-61.43 2.3-61.43
LVJO 82.23-90.93 82.23-90.93
GNT2O 27.41-97.28 27.41-97.28
LNT1H 49.65-91.26 49.65-91.26
PWDOPENH 40.65-77.35 17.22-77.35
LSTO 19.03-76.62 19.03-76.62
GNT3O 33.98-97.21 7.52-97.65
DEFRNT2S 91-91 84.2-91
PWDROBCH 41.16-57.06 41.16-65.1

Also Check:

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2024 D. Y. Patil College of Engineering Pune Fees 2025

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 (Course Wise)

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for EWS Category

BE (Information Technology) Cutoff for MHT-CET (EWS Category) expected to fall in the range between 94.5-96.67, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Computer Engineering is expected to be the second most preferred course for EWS Category with expected range of 93.35-97.59. You can check course wise expected MHT-CET 2025 cutoff for EWS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE (Information Technology) 95.16-96.59 94.5-96.67
BE Computer Engineering 96.33-97.26 93.35-97.59
BE Artificial Intelligence and Data Science 91.65-95.23 91.65-95.85
BE Electronics & Telecom Engineering 89.9-93.54 89.39-94.19
BE Robotics and Automation 67.77-86.38 67.77-88.91
BE Mechanical Engineering 66.44-81.86 58.6-84.5
BE Civil Engineering 57.44-74.38 41.07-78.87
BE Instrumentation & Control Engineering 4.81-76.84 4.81-86.63

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GOPENS Category

BE Computer Engineering Cutoff for MHT-CET (GOPENS Category) expected to fall in the range between 97.55-97.6, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENS Category with expected range of 97.05-97.07. You can check course wise expected MHT-CET 2025 cutoff for GOPENS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 97.6-97.6 97.55-97.6
BE (Information Technology) 97.07-97.07 97.05-97.07
BE Artificial Intelligence and Data Science 96.8-96.8 96.72-96.81
BE Electronics & Telecom Engineering 95.47-95.47 95.47-95.51
BE Robotics and Automation - 94.38-94.38
BE Mechanical Engineering 91.63-91.63 91.63-93.9
BE Civil Engineering 88.19-88.19 88.05-88.19
BE Instrumentation & Control Engineering 87.92-87.92 87.08-87.92

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GSCS Category

BE Computer Engineering Cutoff for MHT-CET (GSCS Category) expected to fall in the range between 92.91-92.97, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSCS Category with expected range of 92.11-92.43. You can check course wise expected MHT-CET 2025 cutoff for GSCS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 92.97-92.97 92.91-92.97
BE (Information Technology) 92.24-92.24 92.11-92.43
BE Artificial Intelligence and Data Science 91.27-91.27 91.27-91.56
BE Electronics & Telecom Engineering 89.45-89.45 88.44-89.45
BE Robotics and Automation - 86.08-86.08
BE Mechanical Engineering 83.54-83.54 81.98-83.74
BE Instrumentation & Control Engineering 80.74-80.74 80.74-83.03
BE Civil Engineering 76.36-76.36 76.36-76.54

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LOPENS Category

BE Computer Engineering Cutoff for MHT-CET (LOPENS Category) expected to fall in the range between 97.31-97.5, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOPENS Category with expected range of 97.01-97.05. You can check course wise expected MHT-CET 2025 cutoff for LOPENS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 97.5-97.5 97.31-97.5
BE (Information Technology) 97.01-97.01 97.01-97.05
BE Artificial Intelligence and Data Science 96.51-96.51 96.5-96.51
BE Electronics & Telecom Engineering 95.74-95.74 95.34-95.74
BE Robotics and Automation - 94.57-94.57
BE Mechanical Engineering 90.33-90.33 90.33-93.42
BE Instrumentation & Control Engineering 89.33-89.33 89.33-90.02
BE Civil Engineering 87.45-87.45 82.78-87.45

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for DEFOPENS Category

BE Computer Engineering Cutoff for MHT-CET (DEFOPENS Category) expected to fall in the range between 89.31-97.28, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for DEFOPENS Category with expected range of 87.4-95.18. You can check course wise expected MHT-CET 2025 cutoff for DEFOPENS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 89.31-95.33 89.31-97.28
BE (Information Technology) 87.4-94.24 87.4-95.18
BE Artificial Intelligence and Data Science 69.66-92.32 69.66-93.9
BE Electronics & Telecom Engineering 53.91-91.97 53.91-91.97
BE Robotics and Automation 41.07-84.22 41.07-90.2
BE Instrumentation & Control Engineering 47.35-86.8 39.91-88.49
BE Civil Engineering 76.36-76.36 20.82-76.36
BE Mechanical Engineering 17-82.46 17-87.6

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GOBCS Category

BE Computer Engineering Cutoff for MHT-CET (GOBCS Category) expected to fall in the range between 97.39-97.44, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOBCS Category with expected range of 96.83-97.01. You can check course wise expected MHT-CET 2025 cutoff for GOBCS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 97.44-97.44 97.39-97.44
BE (Information Technology) 97.01-97.01 96.83-97.01
BE Artificial Intelligence and Data Science 96.54-96.54 96.54-96.64
BE Electronics & Telecom Engineering 95.04-95.04 95-95.04
BE Robotics and Automation - 93.71-93.71
BE Mechanical Engineering 90.33-90.33 90.33-92.09
BE Instrumentation & Control Engineering 86.13-86.13 85.97-86.13
BE Civil Engineering 85.34-85.34 85.07-85.34

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GSTS Category

BE Instrumentation & Control Engineering Cutoff for MHT-CET (GSTS Category) expected to fall in the range between 86.27-86.27, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GSTS Category with expected range of 75.74-76.78. You can check course wise expected MHT-CET 2025 cutoff for GSTS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Instrumentation & Control Engineering - 86.27-86.27
BE Computer Engineering 75.74-75.74 75.74-76.78
BE (Information Technology) 73.8-73.8 73.8-73.8
BE Artificial Intelligence and Data Science 63.54-63.54 63.54-74.97
BE Robotics and Automation - 46.28-46.28
BE Electronics & Telecom Engineering 44.51-44.51 44.51-66.85
BE Civil Engineering 32.1-32.1 32.1-45.46
BE Mechanical Engineering 11.49-11.49 11.49-22.06

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LOBCS Category

BE Computer Engineering Cutoff for MHT-CET (LOBCS Category) expected to fall in the range between 97.06-97.18, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOBCS Category with expected range of 96.82-96.93. You can check course wise expected MHT-CET 2025 cutoff for LOBCS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 97.18-97.18 97.06-97.18
BE (Information Technology) 96.93-96.93 96.82-96.93
BE Artificial Intelligence and Data Science 96.33-96.33 96.17-96.33
BE Electronics & Telecom Engineering 95.02-95.02 94.69-95.27
BE Robotics and Automation - 93.96-93.96
BE Mechanical Engineering 88.02-88.02 88.02-92.32
BE Instrumentation & Control Engineering 84.39-84.39 84.39-89.04
BE Civil Engineering 79.13-79.13 79.13-80.97

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for TFWS Category

BE Computer Engineering Cutoff for MHT-CET (TFWS Category) expected to fall in the range between 97.21-98.11, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for TFWS Category with expected range of 96.22-97.8. You can check course wise expected MHT-CET 2025 cutoff for TFWS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 97.21-98.11 97.21-98.11
BE (Information Technology) 96.27-97.69 96.22-97.8
BE Artificial Intelligence and Data Science 94.26-97.35 94.26-97.35
BE Electronics & Telecom Engineering 92.62-95.96 92.53-96.04
BE Robotics and Automation 86.76-93.64 85.79-95.49
BE Civil Engineering 83.41-90.16 83.41-90.16
BE Instrumentation & Control Engineering 81.51-88.5 81.51-90.46
BE Mechanical Engineering 77.53-93.83 77.53-93.83

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LSCS Category

BE Computer Engineering Cutoff for MHT-CET (LSCS Category) expected to fall in the range between 92.92-92.99, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSCS Category with expected range of 90.96-94.09. You can check course wise expected MHT-CET 2025 cutoff for LSCS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 92.99-92.99 92.92-92.99
BE (Information Technology) 90.96-90.96 90.96-94.09
BE Artificial Intelligence and Data Science 89.87-89.87 89.87-90.16
BE Electronics & Telecom Engineering 88.19-88.19 87.56-88.19
BE Mechanical Engineering 77.64-77.64 77.64-81.37
BE Instrumentation & Control Engineering 67.84-67.84 67.84-70.87
BE Civil Engineering 63.7-63.7 63.7-83.75

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GNT2S Category

BE Computer Engineering Cutoff for MHT-CET (GNT2S Category) expected to fall in the range between 96.83-97.25, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT2S Category with expected range of 96.49-96.51. You can check course wise expected MHT-CET 2025 cutoff for GNT2S Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 97.25-97.25 96.83-97.25
BE (Information Technology) 96.51-96.51 96.49-96.51
BE Artificial Intelligence and Data Science 95.35-95.35 95.35-96.1
BE Electronics & Telecom Engineering 94.84-94.84 94.6-94.84
BE Mechanical Engineering 89.92-89.92 89.92-89.92
BE Civil Engineering 76.6-76.6 76.6-83.15
BE Instrumentation & Control Engineering 75.36-75.36 75.36-75.36

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GNT1S Category

BE Computer Engineering Cutoff for MHT-CET (GNT1S Category) expected to fall in the range between 97-97, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GNT1S Category with expected range of 95.04-95.35. You can check course wise expected MHT-CET 2025 cutoff for GNT1S Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 97-97 97-97
BE Artificial Intelligence and Data Science 95.04-95.04 95.04-95.35
BE (Information Technology) 95.34-95.34 95.04-95.34
BE Electronics & Telecom Engineering 93.85-93.85 93.85-93.85
BE Mechanical Engineering 85.34-85.34 85.34-89.33
BE Instrumentation & Control Engineering 76.62-76.62 76.62-76.62
BE Civil Engineering 79.82-79.82 76.36-79.82

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LNT2S Category

BE Computer Engineering Cutoff for MHT-CET (LNT2S Category) expected to fall in the range between 94.79-96.54, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LNT2S Category with expected range of 94.75-94.75. You can check course wise expected MHT-CET 2025 cutoff for LNT2S Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 96.54-96.54 94.79-96.54
BE (Information Technology) 94.75-94.75 94.75-94.75
BE Artificial Intelligence and Data Science 95.29-95.29 93.87-95.29
BE Electronics & Telecom Engineering 93.67-93.67 91.94-93.67
BE Robotics and Automation - 90.81-90.81
BE Mechanical Engineering 80.74-80.74 80.74-82.7
BE Civil Engineering 79.75-79.75 74.38-79.75

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LNT3S Category

BE Computer Engineering Cutoff for MHT-CET (LNT3S Category) expected to fall in the range between 94.24-95.44, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LNT3S Category with expected range of 93.71-93.71. You can check course wise expected MHT-CET 2025 cutoff for LNT3S Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 94.24-94.24 94.24-95.44
BE Electronics & Telecom Engineering 93.71-93.71 93.71-93.71
BE Mechanical Engineering 86.22-86.22 76.36-86.22
BE Civil Engineering 69.07-69.07 69.07-69.07

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for DEFOBCS Category

BE Computer Engineering Cutoff for MHT-CET (DEFOBCS Category) expected to fall in the range between 89.97-93.11, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for DEFOBCS Category with expected range of 88.67-92.54. You can check course wise expected MHT-CET 2025 cutoff for DEFOBCS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 89.97-93.11 89.97-93.11
BE (Information Technology) 88.67-92.54 88.67-92.54
BE Artificial Intelligence and Data Science 85.62-91.55 85.62-91.55
BE Electronics & Telecom Engineering 82.23-89.04 82.23-89.04
BE Mechanical Engineering 74.51-74.51 74.51-74.51
BE Civil Engineering 75.35-75.35 24.77-75.35

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GVJS Category

BE Computer Engineering Cutoff for MHT-CET (GVJS Category) expected to fall in the range between 93.28-93.28, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GVJS Category with expected range of 93.05-93.05. You can check course wise expected MHT-CET 2025 cutoff for GVJS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 93.28-93.28 93.28-93.28
BE (Information Technology) 93.05-93.05 93.05-93.05
BE Artificial Intelligence and Data Science 92.66-92.66 92.66-93.05
BE Electronics & Telecom Engineering 89.78-89.78 89.78-89.78
BE Civil Engineering 83.58-83.58 83.58-83.58
BE Mechanical Engineering 80.63-80.63 80.63-80.63

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for PWDOPENS Category

BE Robotics and Automation Cutoff for MHT-CET (PWDOPENS Category) expected to fall in the range between 94.69-94.69, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for PWDOPENS Category with expected range of 92.56-92.83. You can check course wise expected MHT-CET 2025 cutoff for PWDOPENS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Robotics and Automation - 94.69-94.69
BE Mechanical Engineering - 92.56-92.83
BE Instrumentation & Control Engineering - 89.48-89.8
BE Computer Engineering 65.55-65.55 65.55-65.55
BE Electronics & Telecom Engineering 60.62-60.62 60.62-84.61
BE Artificial Intelligence and Data Science 57.05-57.05 57.05-57.05
BE Civil Engineering 44.51-44.51 44.51-86.97
BE (Information Technology) 50.1-50.1 26.13-50.1

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LSTS Category

BE Instrumentation & Control Engineering Cutoff for MHT-CET (LSTS Category) expected to fall in the range between 87.5-87.5, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LSTS Category with expected range of 76.73-82.24. You can check course wise expected MHT-CET 2025 cutoff for LSTS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Instrumentation & Control Engineering - 87.5-87.5
BE Computer Engineering 82.24-82.24 76.73-82.24
BE Mechanical Engineering - 73.85-73.85
BE (Information Technology) 54.39-54.39 54.39-54.39
BE Civil Engineering 52.99-52.99 52.99-52.99
BE Artificial Intelligence and Data Science 50.6-50.6 50.6-56.01
BE Robotics and Automation - 22.97-22.97
BE Electronics & Telecom Engineering 13.95-13.95 13.95-13.95

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GNT3S Category

BE Computer Engineering Cutoff for MHT-CET (GNT3S Category) expected to fall in the range between 97.45-97.45, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT3S Category with expected range of 96.36-96.83. You can check course wise expected MHT-CET 2025 cutoff for GNT3S Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 97.45-97.45 97.45-97.45
BE (Information Technology) 96.83-96.83 96.36-96.83
BE Artificial Intelligence and Data Science 95.96-95.96 95.72-95.96
BE Electronics & Telecom Engineering 95.39-95.39 95.39-95.39
BE Civil Engineering 92.34-92.34 92.34-92.34
BE Instrumentation & Control Engineering 77.84-77.84 77.84-85.75

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LVJS Category

BE Computer Engineering Cutoff for MHT-CET (LVJS Category) expected to fall in the range between 90.44-90.44, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LVJS Category with expected range of 87.45-87.45. You can check course wise expected MHT-CET 2025 cutoff for LVJS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 90.44-90.44 90.44-90.44
BE (Information Technology) 87.45-87.45 87.45-87.45
BE Artificial Intelligence and Data Science 86.78-86.78 86.78-86.78
BE Civil Engineering 82.55-82.55 82.55-82.55
BE Electronics & Telecom Engineering 78.45-78.45 78.45-78.45
BE Instrumentation & Control Engineering 52.03-52.03 52.03-55.36

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LNT1S Category

BE (Information Technology) Cutoff for MHT-CET (LNT1S Category) expected to fall in the range between 93.9-93.9, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LNT1S Category with expected range of 93.05-93.05. You can check course wise expected MHT-CET 2025 cutoff for LNT1S Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE (Information Technology) 93.9-93.9 93.9-93.9
BE Artificial Intelligence and Data Science 93.05-93.05 93.05-93.05
BE Computer Engineering 93.01-93.01 93.01-93.01
BE Electronics & Telecom Engineering 92.19-92.19 87.5-92.19

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for DEFROBCS Category

BE Computer Engineering Cutoff for MHT-CET (DEFROBCS Category) expected to fall in the range between 88.07-93.45, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for DEFROBCS Category with expected range of 82.63-90.58. You can check course wise expected MHT-CET 2025 cutoff for DEFROBCS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 88.07-93.45 88.07-93.45
BE (Information Technology) 82.63-90.58 82.63-90.58
BE Artificial Intelligence and Data Science 55.31-92.11 55.31-92.11
BE Mechanical Engineering - 53.89-53.89
BE Electronics & Telecom Engineering 37.84-89.21 37.84-89.21
BE Robotics and Automation 41.91-72.39 34.18-72.39
BE Instrumentation & Control Engineering 30.95-30.95 30.95-30.95

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for PWDRNT1S Category

BE Artificial Intelligence and Data Science Cutoff for MHT-CET (PWDRNT1S Category) expected to fall in the range between 19.37-19.37, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. You can check course wise expected MHT-CET 2025 cutoff for PWDRNT1S Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Artificial Intelligence and Data Science 19.37-19.37 19.37-19.37

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for ORPHAN Category

BE Artificial Intelligence and Data Science Cutoff for MHT-CET (ORPHAN Category) expected to fall in the range between 96.67-96.67, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for ORPHAN Category with expected range of 95.39-95.39. You can check course wise expected MHT-CET 2025 cutoff for ORPHAN Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Artificial Intelligence and Data Science - 96.67-96.67
BE Electronics & Telecom Engineering - 95.39-95.39
BE Mechanical Engineering - 91.63-91.63
BE Civil Engineering - 86.71-86.71
BE (Information Technology) 51.28-51.28 51.28-97.04

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for DEFRNT3S Category

BE (Information Technology) Cutoff for MHT-CET (DEFRNT3S Category) expected to fall in the range between 92.93-92.93, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. You can check course wise expected MHT-CET 2025 cutoff for DEFRNT3S Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE (Information Technology) 92.93-92.93 92.93-92.93

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for PWDOBCS Category

BE (Information Technology) Cutoff for MHT-CET (PWDOBCS Category) expected to fall in the range between 96.81-96.81, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for PWDOBCS Category with expected range of 95.28-95.28. You can check course wise expected MHT-CET 2025 cutoff for PWDOBCS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE (Information Technology) - 96.81-96.81
BE Electronics & Telecom Engineering - 95.28-95.28
BE Mechanical Engineering - 92.71-92.71
BE Civil Engineering - 85.21-85.21
BE Computer Engineering 63.27-63.27 63.27-81.21
BE Artificial Intelligence and Data Science - 18.41-97.07

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for DEFSCS Category

BE Civil Engineering Cutoff for MHT-CET (DEFSCS Category) expected to fall in the range between 76.62-76.62, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for DEFSCS Category with expected range of 68.07-68.07. You can check course wise expected MHT-CET 2025 cutoff for DEFSCS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Civil Engineering - 76.62-76.62
BE Electronics & Telecom Engineering - 68.07-68.07
BE Mechanical Engineering - 11.39-11.39

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GNT2H Category

BE Computer Engineering Cutoff for MHT-CET (GNT2H Category) expected to fall in the range between 94.74-97.18, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT2H Category with expected range of 91.07-94.9. You can check course wise expected MHT-CET 2025 cutoff for GNT2H Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 94.74-97.18 94.74-97.18
BE (Information Technology) 93.35-94.9 91.07-94.9
BE Electronics & Telecom Engineering 85.02-89.81 84.68-89.81
BE Artificial Intelligence and Data Science 83.97-93.6 83.97-93.6
BE Mechanical Engineering 53.91-75.13 45.98-75.13
BE Robotics and Automation 44.52-81.12 44.52-83.29
BE Civil Engineering 24.38-42.8 24.38-55.45
BE Instrumentation & Control Engineering 14.61-35.13 14.61-35.13

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GOBCH Category

BE Computer Engineering Cutoff for MHT-CET (GOBCH Category) expected to fall in the range between 94.15-97.01, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOBCH Category with expected range of 92.4-96.81. You can check course wise expected MHT-CET 2025 cutoff for GOBCH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 94.56-97.01 94.15-97.01
BE (Information Technology) 92.894-95.27 92.4-96.81
BE Artificial Intelligence and Data Science 89.09-94.22 89.09-94.24
BE Electronics & Telecom Engineering 83.69-90.2 82.52-90.68
BE Robotics and Automation 51.89-81.86 51.89-87.22
BE Mechanical Engineering 44.45-75.15 30.11-76.56
BE Instrumentation & Control Engineering 8.38-55.45 8.38-74.19
BE Civil Engineering 7.44-26.2 7.44-39.04

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GOBCO Category

BE Computer Engineering Cutoff for MHT-CET (GOBCO Category) expected to fall in the range between 95.92-97.72, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOBCO Category with expected range of 95.27-96.98. You can check course wise expected MHT-CET 2025 cutoff for GOBCO Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 96.46-97.72 95.92-97.72
BE (Information Technology) 95.3-96.98 95.27-96.98
BE Artificial Intelligence and Data Science 92.96-96.06 92.31-96.06
BE Electronics & Telecom Engineering 91.57-94.11 90.15-94.11
BE Mechanical Engineering 72.57-85.44 72.57-87.07
BE Civil Engineering 68.29-70.51 39.78-74.86
BE Robotics and Automation 39.15-92.29 39.15-92.29
BE Instrumentation & Control Engineering 7.07-78.42 7.07-78.42

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GOPENH Category

BE Computer Engineering Cutoff for MHT-CET (GOPENH Category) expected to fall in the range between 95.29-98.07, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENH Category with expected range of 93.35-97.12. You can check course wise expected MHT-CET 2025 cutoff for GOPENH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 96.66-97.34 95.29-98.07
BE (Information Technology) 95.1-96.07 93.35-97.12
BE Artificial Intelligence and Data Science 93.08-94.84 90.46-95.4
BE Electronics & Telecom Engineering 89.54-91.49 84.77-92.07
BE Robotics and Automation 77.84-86.11 67.84-90.67
BE Mechanical Engineering 68.37-81.12 54.65-84.5
BE Civil Engineering 46.44-55.72 4.37-55.72
BE Instrumentation & Control Engineering 43.3-59.68 1.92-75.89

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GOPENO Category

BE Computer Engineering Cutoff for MHT-CET (GOPENO Category) expected to fall in the range between 96.51-97.89, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENO Category with expected range of 95.34-97.25. You can check course wise expected MHT-CET 2025 cutoff for GOPENO Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 96.59-97.89 96.51-97.89
BE (Information Technology) 95.52-97.18 95.34-97.25
BE Artificial Intelligence and Data Science 93.86-96.28 92.57-96.61
BE Electronics & Telecom Engineering 92.17-94.33 91.03-95.65
BE Robotics and Automation 86.36-93.05 85.02-94.62
BE Mechanical Engineering 78.14-87.62 69.66-87.78
BE Civil Engineering 71.12-79.81 68.32-83.43
BE Instrumentation & Control Engineering 56.63-79.79 43.08-79.79

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GSCH Category

BE Computer Engineering Cutoff for MHT-CET (GSCH Category) expected to fall in the range between 86.71-93.95, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSCH Category with expected range of 80.22-88.75. You can check course wise expected MHT-CET 2025 cutoff for GSCH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 87.51-92.12 86.71-93.95
BE (Information Technology) 80.76-88.75 80.22-88.75
BE Artificial Intelligence and Data Science 73.64-84.21 73.64-88.28
BE Electronics & Telecom Engineering 61.52-76.28 61.52-84.04
BE Robotics and Automation 43.08-58.08 30.3-68.7
BE Instrumentation & Control Engineering 15.54-67.95 11.31-67.95
BE Mechanical Engineering 11.29-63.65 5.69-63.65
BE Civil Engineering 8.38-39.04 3.18-60.97

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GSCO Category

BE (Information Technology) Cutoff for MHT-CET (GSCO Category) expected to fall in the range between 90.88-93.99, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GSCO Category with expected range of 90.68-95.71. You can check course wise expected MHT-CET 2025 cutoff for GSCO Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE (Information Technology) 90.88-93.99 90.88-93.99
BE Computer Engineering 92.2-95.71 90.68-95.71
BE Artificial Intelligence and Data Science 86.78-91.8 84.22-91.97
BE Electronics & Telecom Engineering 83.34-90.42 83.34-90.46
BE Robotics and Automation 73.24-86.97 71.24-86.97
BE Mechanical Engineering 69.34-79.78 63.71-86.34
BE Instrumentation & Control Engineering 60.08-76.84 60.08-76.84
BE Civil Engineering 12.2-61.27 10.27-61.27

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LOBCH Category

BE Computer Engineering Cutoff for MHT-CET (LOBCH Category) expected to fall in the range between 94.15-97.17, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOBCH Category with expected range of 92.33-95.4. You can check course wise expected MHT-CET 2025 cutoff for LOBCH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 94.15-96.24 94.15-97.17
BE (Information Technology) 92.33-95.4 92.33-95.4
BE Artificial Intelligence and Data Science 87.06-93.53 87.06-95.15
BE Electronics & Telecom Engineering 84.56-90.42 83.07-90.42
BE Robotics and Automation 45.17-80.62 45.17-86.01
BE Instrumentation & Control Engineering 24.87-58.74 24.87-62.49
BE Mechanical Engineering 18.3-66.39 18.3-71.27
BE Civil Engineering 39.44-39.44 12.22-41.09

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LOPENH Category

BE Computer Engineering Cutoff for MHT-CET (LOPENH Category) expected to fall in the range between 94.92-98.04, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOPENH Category with expected range of 93.06-95.95. You can check course wise expected MHT-CET 2025 cutoff for LOPENH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 95.27-96.67 94.92-98.04
BE (Information Technology) 93.92-95.88 93.06-95.95
BE Artificial Intelligence and Data Science 89.48-94.52 89.48-95.4
BE Electronics & Telecom Engineering 86.71-91.25 85.31-93
BE Robotics and Automation 62.3-83.88 62.3-91.74
BE Civil Engineering 14.92-19.1 14.24-64.06
BE Mechanical Engineering 12.38-75.17 12.38-76.76
BE Instrumentation & Control Engineering 10.55-62.49 10.55-81.51

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LOPENO Category

BE Computer Engineering Cutoff for MHT-CET (LOPENO Category) expected to fall in the range between 95.79-97.38, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOPENO Category with expected range of 94.51-96.55. You can check course wise expected MHT-CET 2025 cutoff for LOPENO Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 96.3-97.38 95.79-97.38
BE (Information Technology) 95.11-96.55 94.51-96.55
BE Artificial Intelligence and Data Science 91.51-95.58 91.49-96.65
BE Electronics & Telecom Engineering 91.7-94.29 91.03-94.52
BE Instrumentation & Control Engineering 65.83-86.2 65.83-86.2
BE Robotics and Automation 87.22-92.29 63.94-92.67
BE Mechanical Engineering 55.02-78.07 55.02-83.51
BE Civil Engineering 32.59-76.84 32.59-76.84

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LSCH Category

BE Computer Engineering Cutoff for MHT-CET (LSCH Category) expected to fall in the range between 84.68-90.57, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSCH Category with expected range of 81.61-88.62. You can check course wise expected MHT-CET 2025 cutoff for LSCH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 85.83-90.57 84.68-90.57
BE (Information Technology) 82.15-87.62 81.61-88.62
BE Artificial Intelligence and Data Science 77.21-82.23 77.21-82.23
BE Electronics & Telecom Engineering 63.65-78.04 61.52-78.04
BE Civil Engineering 2.85-61.52 2.85-61.52
BE Mechanical Engineering 2.75-30 2.75-30
BE Robotics and Automation 32.26-74.08 2.42-74.08
BE Instrumentation & Control Engineering 1.82-36.16 1.82-36.16

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GNT1H Category

BE Computer Engineering Cutoff for MHT-CET (GNT1H Category) expected to fall in the range between 92.77-96.28, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GNT1H Category with expected range of 87.78-90.52. You can check course wise expected MHT-CET 2025 cutoff for GNT1H Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 92.77-96.28 92.77-96.28
BE Artificial Intelligence and Data Science 87.78-90.52 87.78-90.52
BE (Information Technology) 86.15-93.64 85.16-93.64
BE Electronics & Telecom Engineering 77.61-82.31 77.61-82.31
BE Mechanical Engineering 40.25-64.45 40.25-64.45
BE Robotics and Automation 39.87-79.78 39.87-79.78
BE Civil Engineering 42.55-42.55 28.11-49.56
BE Instrumentation & Control Engineering 26.72-26.72 26.72-26.72

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GVJH Category

BE Computer Engineering Cutoff for MHT-CET (GVJH Category) expected to fall in the range between 85.89-95.69, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GVJH Category with expected range of 83.34-91.35. You can check course wise expected MHT-CET 2025 cutoff for GVJH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 85.89-92.67 85.89-95.69
BE (Information Technology) 83.34-91.35 83.34-91.35
BE Artificial Intelligence and Data Science 77.38-83.88 77.38-88.28
BE Electronics & Telecom Engineering 65.87-79.59 65.87-79.59
BE Robotics and Automation 28.46-28.46 28.46-47.43
BE Mechanical Engineering 26.73-68.4 26.73-68.4
BE Instrumentation & Control Engineering 30.95-30.95 21.51-53.16
BE Civil Engineering 6.67-44.64 6.67-61.26

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LOBCO Category

BE Computer Engineering Cutoff for MHT-CET (LOBCO Category) expected to fall in the range between 95.22-97.15, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOBCO Category with expected range of 94.08-96.48. You can check course wise expected MHT-CET 2025 cutoff for LOBCO Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 95.34-97.15 95.22-97.15
BE (Information Technology) 94.51-96.48 94.08-96.48
BE Artificial Intelligence and Data Science 90.22-95.36 90.22-95.36
BE Electronics & Telecom Engineering 88.74-94.12 88.74-94.12
BE Mechanical Engineering 75.35-75.35 59.72-78.34
BE Robotics and Automation 57.24-80.26 57.24-80.26
BE Instrumentation & Control Engineering 23.64-75.35 23.64-75.35
BE Civil Engineering 3.91-40.65 3.91-40.65

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LSCO Category

BE Computer Engineering Cutoff for MHT-CET (LSCO Category) expected to fall in the range between 88.59-92.83, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSCO Category with expected range of 86.71-91.34. You can check course wise expected MHT-CET 2025 cutoff for LSCO Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 90.63-92.83 88.59-92.83
BE (Information Technology) 86.71-91.34 86.71-91.34
BE Artificial Intelligence and Data Science 79.95-88.05 79.95-88.05
BE Electronics & Telecom Engineering 84.47-85.59 75.43-85.59
BE Robotics and Automation 22.16-58.81 22.16-58.81
BE Civil Engineering 64.48-64.48 20.23-64.48
BE Mechanical Engineering 10.55-57.21 10.55-57.21
BE Instrumentation & Control Engineering 7.44-69.3 7.44-69.3

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GSTH Category

BE Computer Engineering Cutoff for MHT-CET (GSTH Category) expected to fall in the range between 69.65-76.28, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for GSTH Category with expected range of 55.3-55.3. You can check course wise expected MHT-CET 2025 cutoff for GSTH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 69.66-74.47 69.65-76.28
BE Robotics and Automation 55.3-55.3 55.3-55.3
BE (Information Technology) 29.87-60.08 29.87-70.1
BE Artificial Intelligence and Data Science 26.93-39.97 26.93-52.25
BE Mechanical Engineering 8.59-48.84 8.59-48.84
BE Electronics & Telecom Engineering 21.91-28.94 6.19-28.94
BE Civil Engineering 0.07-44.64 0.07-44.64

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GSTO Category

BE Computer Engineering Cutoff for MHT-CET (GSTO Category) expected to fall in the range between 70.82-85.15, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSTO Category with expected range of 69.16-75.9. You can check course wise expected MHT-CET 2025 cutoff for GSTO Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 76.1-85.15 70.82-85.15
BE (Information Technology) 69.16-75.9 69.16-75.9
BE Artificial Intelligence and Data Science 44.74-68.32 44.74-68.32
BE Mechanical Engineering 43.12-43.12 43.12-43.12
BE Civil Engineering 24.34-24.34 20.82-24.34
BE Robotics and Automation 47.39-47.39 10.2-47.39
BE Electronics & Telecom Engineering 0.44-69.03 0.44-69.03

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GVJO Category

BE Computer Engineering Cutoff for MHT-CET (GVJO Category) expected to fall in the range between 91.73-96.28, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GVJO Category with expected range of 83.08-88.24. You can check course wise expected MHT-CET 2025 cutoff for GVJO Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 91.73-96.28 91.73-96.28
BE Artificial Intelligence and Data Science 83.08-88.24 83.08-88.24
BE Electronics & Telecom Engineering 82.01-85.18 82.01-85.18
BE (Information Technology) 69.16-95.1 69.16-95.1
BE Mechanical Engineering 68.37-72.31 68.37-72.31
BE Robotics and Automation 59.68-59.68 59.68-59.68
BE Civil Engineering 47.89-68.4 47.89-68.4
BE Instrumentation & Control Engineering - 35.98-35.98

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LNT2H Category

BE Robotics and Automation Cutoff for MHT-CET (LNT2H Category) expected to fall in the range between 93.97-93.97, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LNT2H Category with expected range of 93.06-95.77. You can check course wise expected MHT-CET 2025 cutoff for LNT2H Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Robotics and Automation 93.97-93.97 93.97-93.97
BE Computer Engineering 93.06-95.77 93.06-95.77
BE (Information Technology) 92.71-94.2 89.38-94.2
BE Artificial Intelligence and Data Science 71.12-90.29 71.12-90.29
BE Electronics & Telecom Engineering 68.1-86.91 68.1-89.4
BE Civil Engineering 25.79-62.83 25.79-62.83
BE Mechanical Engineering 39.6-39.6 12.94-64.48

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LVJH Category

BE Artificial Intelligence and Data Science Cutoff for MHT-CET (LVJH Category) expected to fall in the range between 88.28-88.28, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LVJH Category with expected range of 81.02-81.02. You can check course wise expected MHT-CET 2025 cutoff for LVJH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Artificial Intelligence and Data Science 88.28-88.28 88.28-88.28
BE (Information Technology) 81.02-81.02 81.02-81.02
BE Electronics & Telecom Engineering 78.41-78.41 78.41-78.41
BE Robotics and Automation 32.31-32.31 32.31-63.39
BE Civil Engineering - 17.69-17.69

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for DEFRSCS Category

BE Artificial Intelligence and Data Science Cutoff for MHT-CET (DEFRSCS Category) expected to fall in the range between 67.71-76.84, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Computer Engineering is expected to be the second most preferred course for DEFRSCS Category with expected range of 44.86-86.45. You can check course wise expected MHT-CET 2025 cutoff for DEFRSCS Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Artificial Intelligence and Data Science 74.51-76.84 67.71-76.84
BE Computer Engineering 44.86-82.68 44.86-86.45
BE (Information Technology) 44.52-83.35 44.52-83.35
BE Electronics & Telecom Engineering 23.95-66.39 0.66-66.39

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LNT3H Category

BE Computer Engineering Cutoff for MHT-CET (LNT3H Category) expected to fall in the range between 92.67-92.67, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LNT3H Category with expected range of 89.97-89.97. You can check course wise expected MHT-CET 2025 cutoff for LNT3H Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 92.67-92.67 92.67-92.67
BE Artificial Intelligence and Data Science 89.97-89.97 89.97-89.97
BE Electronics & Telecom Engineering 85.19-85.19 85.19-85.19

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LNT1O Category

BE Electronics & Telecom Engineering Cutoff for MHT-CET (LNT1O Category) expected to fall in the range between 86.34-86.7, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Civil Engineering is expected to be the second most preferred course for LNT1O Category with expected range of 71.27-71.27. You can check course wise expected MHT-CET 2025 cutoff for LNT1O Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Electronics & Telecom Engineering 86.34-86.34 86.34-86.7
BE Civil Engineering 71.27-71.27 71.27-71.27

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LNT2O Category

BE Artificial Intelligence and Data Science Cutoff for MHT-CET (LNT2O Category) expected to fall in the range between 92.18-92.18, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LNT2O Category with expected range of 91.7-91.7. You can check course wise expected MHT-CET 2025 cutoff for LNT2O Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Artificial Intelligence and Data Science 92.18-92.18 92.18-92.18
BE Electronics & Telecom Engineering 91.7-91.7 91.7-91.7

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LNT3O Category

BE Electronics & Telecom Engineering Cutoff for MHT-CET (LNT3O Category) expected to fall in the range between 84.4-84.4, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. You can check course wise expected MHT-CET 2025 cutoff for LNT3O Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Electronics & Telecom Engineering 84.4-84.4 84.4-84.4

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GNT3H Category

BE Computer Engineering Cutoff for MHT-CET (GNT3H Category) expected to fall in the range between 93.73-95.79, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT3H Category with expected range of 93.48-95.36. You can check course wise expected MHT-CET 2025 cutoff for GNT3H Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 93.73-95.79 93.73-95.79
BE (Information Technology) 93.48-95.36 93.48-95.36
BE Artificial Intelligence and Data Science 83.07-94.36 83.07-94.36
BE Electronics & Telecom Engineering 77.17-88.85 77.17-88.85
BE Mechanical Engineering 58.98-75.35 58.98-75.35
BE Robotics and Automation 73.44-82.87 41.19-83.17
BE Instrumentation & Control Engineering 12.93-48.97 12.93-58.71
BE Civil Engineering 31.35-48.97 6.8-48.97

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GNT1O Category

BE Computer Engineering Cutoff for MHT-CET (GNT1O Category) expected to fall in the range between 91.59-97.33, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT1O Category with expected range of 90.79-96.48. You can check course wise expected MHT-CET 2025 cutoff for GNT1O Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 91.84-97.33 91.59-97.33
BE (Information Technology) 90.79-96.48 90.79-96.48
BE Artificial Intelligence and Data Science 88.48-94.68 88.48-94.68
BE Electronics & Telecom Engineering 81.896-91.82 81.896-91.82
BE Mechanical Engineering 65.26-78 65.26-78
BE Instrumentation & Control Engineering 61.89-61.89 61.89-61.89
BE Civil Engineering 2.58-12.76 2.58-37.42

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LSTH Category

BE Artificial Intelligence and Data Science Cutoff for MHT-CET (LSTH Category) expected to fall in the range between 61.43-61.43, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LSTH Category with expected range of 29.24-29.24. You can check course wise expected MHT-CET 2025 cutoff for LSTH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Artificial Intelligence and Data Science 61.43-61.43 61.43-61.43
BE Electronics & Telecom Engineering - 29.24-29.24
BE Computer Engineering 14.51-59.86 14.51-59.86
BE Civil Engineering - 9.26-9.26
BE (Information Technology) 2.3-58.81 2.3-58.81

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LVJO Category

BE (Information Technology) Cutoff for MHT-CET (LVJO Category) expected to fall in the range between 90.93-90.93, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LVJO Category with expected range of 82.23-82.23. You can check course wise expected MHT-CET 2025 cutoff for LVJO Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE (Information Technology) 90.93-90.93 90.93-90.93
BE Artificial Intelligence and Data Science 82.23-82.23 82.23-82.23

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GNT2O Category

BE Computer Engineering Cutoff for MHT-CET (GNT2O Category) expected to fall in the range between 93.21-97.28, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT2O Category with expected range of 92.31-96.21. You can check course wise expected MHT-CET 2025 cutoff for GNT2O Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 93.21-97.28 93.21-97.28
BE (Information Technology) 92.68-96.21 92.31-96.21
BE Electronics & Telecom Engineering 89.69-90.52 89.69-90.52
BE Artificial Intelligence and Data Science 88.75-91.48 88.75-91.48
BE Mechanical Engineering 76.27-86.7 76.27-86.7
BE Robotics and Automation 39.15-39.15 39.15-39.15
BE Civil Engineering 68.57-69.66 28.77-69.66
BE Instrumentation & Control Engineering 27.41-57.92 27.41-57.92

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LNT1H Category

BE Computer Engineering Cutoff for MHT-CET (LNT1H Category) expected to fall in the range between 91.26-91.26, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LNT1H Category with expected range of 88.92-88.92. You can check course wise expected MHT-CET 2025 cutoff for LNT1H Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 91.26-91.26 91.26-91.26
BE (Information Technology) 88.92-88.92 88.92-88.92
BE Instrumentation & Control Engineering 49.65-49.65 49.65-49.65

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for PWDOPENH Category

BE Artificial Intelligence and Data Science Cutoff for MHT-CET (PWDOPENH Category) expected to fall in the range between 56.36-56.36, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for PWDOPENH Category with expected range of 40.65-41.16. You can check course wise expected MHT-CET 2025 cutoff for PWDOPENH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Artificial Intelligence and Data Science 56.36-56.36 56.36-56.36
BE (Information Technology) 40.65-40.65 40.65-41.16
BE Computer Engineering 45.64-77.35 17.22-77.35

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for LSTO Category

BE Computer Engineering Cutoff for MHT-CET (LSTO Category) expected to fall in the range between 56.63-56.8, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSTO Category with expected range of 19.03-76.62. You can check course wise expected MHT-CET 2025 cutoff for LSTO Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 56.8-56.8 56.63-56.8
BE (Information Technology) 19.03-76.62 19.03-76.62

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for GNT3O Category

BE Computer Engineering Cutoff for MHT-CET (GNT3O Category) expected to fall in the range between 93.49-97.65, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT3O Category with expected range of 90.69-94.56. You can check course wise expected MHT-CET 2025 cutoff for GNT3O Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 93.49-97.21 93.49-97.65
BE (Information Technology) 90.69-94.56 90.69-94.56
BE Electronics & Telecom Engineering 90.56-91.25 84.65-91.25
BE Artificial Intelligence and Data Science 83.97-83.97 83.97-88.94
BE Mechanical Engineering 63.08-74.14 63.08-74.14
BE Instrumentation & Control Engineering 37.56-37.56 37.56-37.56
BE Civil Engineering 33.98-66.39 7.52-66.39

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for DEFRNT2S Category

BE Computer Engineering Cutoff for MHT-CET (DEFRNT2S Category) expected to fall in the range between 84.2-91, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. You can check course wise expected MHT-CET 2025 cutoff for DEFRNT2S Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 91-91 84.2-91

D. Y. Patil College of Engineering Pune MHT-CET Cutoff 2025 for PWDROBCH Category

BE Computer Engineering Cutoff for MHT-CET (PWDROBCH Category) expected to fall in the range between 41.16-65.1, which makes it the most in-demand course for D. Y. Patil College of Engineering Pune. You can check course wise expected MHT-CET 2025 cutoff for PWDROBCH Category in below table:

Course Round 1 Closing percentile (Expected Range) Closing percentile (Expected Range)
BE Computer Engineering 41.16-57.06 41.16-65.1

Also Check:

D. Y. Patil College of Engineering Pune Admission 2025 D. Y. Patil College of Engineering Pune News and Latest Updates