![Nutan Maharashtra Institute of Engineering and Technology - [NMIET] Talegaon](https://image-static.collegedunia.com/public/college_data/images/logos/1748691843WhatsAppImage20250525at19.56.021.jpeg?h=71.7&w=71.7&mode=stretch)
The Official MHT-CET Cutoff 2025 for Nutan Maharashtra Institute of Engineering and Technology Talegaon has not been released yet. However, students can refer to the expected MHT-CET 2025 cutoff for Nutan Maharashtra Institute of Engineering and Technology Talegaon, which is based on the trends observed in previous years cutoff.
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 (Category Wise)
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET 2025 Expected Cutoff for DEFOPENS Category ranges between 28.77 - 89.41. For Round 1, Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET 2025 is expected to be 43.2-86.85.
| Category | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| DEFOPENS | 43.2-86.85 | 28.77-89.41 |
| EWS | 4.21-90.9 | 0.85-91.26 |
| GNT2S | 73.26-89.99 | 73.26-89.99 |
| GNT3S | 76.77-91.07 | 75.4-91.07 |
| GOBCS | 76.77-92.03 | 75.49-92.09 |
| GOPENS | 78.84-92.45 | 78.84-93.1 |
| GSCS | 63.29-82.39 | 62.14-85.19 |
| LOBCS | 75.36-92.52 | 74.68-92.52 |
| LOPENS | 79.98-92.69 | 79.98-93.81 |
| LSCS | 36.23-84.3 | 36.23-84.5 |
| TFWS | 69.66-94.47 | 65.96-94.7 |
| GNT1S | 63.65-89.34 | 60.63-89.34 |
| GVJS | 66.39-87.68 | 66.39-87.68 |
| DEFOBCS | 60.42-87.69 | 27.15-87.69 |
| LNT2S | 69.22-89.59 | 69.22-89.59 |
| LNT3S | 79.03-90.31 | 79.03-92.24 |
| LVJS | 53.22-83.11 | 53.22-87.14 |
| LNT1S | 55.94-86.72 | 55.94-87.69 |
| GSTS | 14.07-42.27 | 13.27-90.85 |
| DEFROBCS | 70.62-86.22 | 40.76-86.22 |
| PWDOPENS | 1.69-63.82 | 1.69-92.55 |
| LSTS | 39.36-39.36 | 39.36-92.26 |
| DEFSCS | 65.63-65.63 | 60.85-83.2 |
| ORPHAN | 43.47-43.47 | 43.47-91.75 |
| PWDOBCS | - | 63.82-90.67 |
| GOBCH | 7.07-90.8 | 7.07-93.83 |
| GOPENH | 23.12-91.63 | 23.12-94.57 |
| GSCO | 9.36-89.03 | 9.36-89.03 |
| LOPENH | 17-91.63 | 17-92.92 |
| GNT1H | 54.52-88.07 | 26.69-88.63 |
| GNT2O | 58.58-91.07 | 58.58-91.07 |
| GSCH | 3.58-79.82 | 3.58-86.63 |
| LOBCO | 65.8-91.25 | 65.8-92.43 |
| LOPENO | 2.42-91.61 | 2.42-92.12 |
| GNT2H | 52.01-89.45 | 39.61-89.45 |
| GSEBCH | 44.48-89.95 | 44.48-89.95 |
| LNT3H | 69.28-88.36 | 69.28-88.36 |
| LSCH | 35.43-80.02 | 22.91-80.97 |
| LSEBCO | 88.02-91.3 | 86.9-91.3 |
| LNT3O | 67.62-67.62 | 67.5-67.62 |
| LSCO | 64.03-82.48 | 64.03-83.39 |
| LNT2H | 38.99-91.13 | 38.99-91.13 |
| GVJH | 2.49-82.71 | 2.49-82.71 |
| LSEBCH | 64.95-89.28 | 64.95-89.28 |
| LNT1O | 77.84-77.84 | 77.84-77.84 |
| LVJO | 57.05-86.17 | 57.05-86.17 |
| GNT3H | 14.95-89.47 | 14.95-89.47 |
| GNT1O | 80.23-90.83 | 58.98-91.89 |
| LNT2O | 88.93-88.93 | 88.93-89.19 |
| LVJH | 57.05-70.93 | 57.05-70.93 |
| LNT1H | 58.12-83.41 | 58.12-83.41 |
| GVJO | 55.36-91.24 | 55.36-91.24 |
| GSTH | 6.37-45.85 | 1.22-89.32 |
| LSTH | 25.78-54.39 | 25.78-89.89 |
| LSTO | 48.66-48.66 | 48.66-91.63 |
| GNT3O | 77.72-91.71 | 7.62-91.71 |
| GOBCO | 12.09-92.84 | 12.09-92.84 |
| GOPENO | 0.22-93.1 | 0.22-93.1 |
| GSEBCO | - | 68.07-91.13 |
| GSTO | 63.71-63.71 | 55.27-90.07 |
| PWDOBCH | - | 69.63-89.89 |
| PWDOPENH | 3.6-3.6 | 3.6-89.39 |
| PWDSCH | - | 71.72-79.49 |
| LOBCH | 56.56-88.8 | 56.56-89.98 |
| DEFRSCS | 12.69-42.02 | 12.69-42.02 |
| AI | - | 63.09-63.09 |
Also Check:
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 (Course Wise)
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for DEFOPENS Category
BE Computer Science and Engineering Cutoff for MHT-CET (DEFOPENS Category) expected to fall in the range between 85.96-86.39, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering (Artificial Intelligence) is expected to be the second most preferred course for DEFOPENS Category with expected range of 80.86-80.86. You can check course wise expected MHT-CET 2025 cutoff for DEFOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 85.96-85.96 | 85.96-86.39 |
| BE Computer Science and Engineering (Artificial Intelligence) | 80.86-80.86 | 80.86-80.86 |
| BE Artificial Intelligence and Data Science | 79.7-79.7 | 79.7-79.7 |
| BE Electronics and Computer Engineering | 63.4-63.4 | 63.4-71.82 |
| BE Computer Engineering | 61.27-86.85 | 61.27-89.41 |
| BE (Information Technology) | 47.89-85.48 | 47.89-88.12 |
| BE Mechanical Engineering | 43.2-82.78 | 43.2-82.78 |
| BE Electronics & Telecom Engineering | 71.6-75.35 | 28.77-75.35 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for EWS Category
BE Computer Engineering Cutoff for MHT-CET (EWS Category) expected to fall in the range between 78.01-91.26, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for EWS Category with expected range of 76.77-82.78. You can check course wise expected MHT-CET 2025 cutoff for EWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 78.62-90.9 | 78.01-91.26 |
| BE Computer Science and Engineering | 77.54-77.54 | 76.77-82.78 |
| BE Computer Science and Engineering (Artificial Intelligence) | 77.13-77.13 | 76.68-80.35 |
| BE Artificial Intelligence and Data Science | 72.67-72.67 | 72.67-80 |
| BE (Information Technology) | 71.85-90.13 | 71.85-90.27 |
| BE Electronics & Telecom Engineering | 61.13-85.42 | 55.64-85.42 |
| BE Electronics and Computer Engineering | 29.41-29.41 | 29.41-63.4 |
| BE Mechanical Engineering | 4.21-49.48 | 0.85-49.48 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GNT2S Category
BE Computer Engineering Cutoff for MHT-CET (GNT2S Category) expected to fall in the range between 89.27-89.99, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for GNT2S Category with expected range of 89.2-89.85. You can check course wise expected MHT-CET 2025 cutoff for GNT2S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.99-89.99 | 89.27-89.99 |
| BE Computer Science and Engineering | 89.27-89.27 | 89.2-89.85 |
| BE (Information Technology) | 88.14-88.14 | 88.14-88.96 |
| BE Computer Science and Engineering (Artificial Intelligence) | 87.78-87.78 | 87.33-87.78 |
| BE Artificial Intelligence and Data Science | 88.25-88.25 | 87.32-88.96 |
| BE Electronics & Telecom Engineering | 86.72-86.72 | 86.39-87.78 |
| BE Electronics and Computer Engineering | 83.9-83.9 | 83.9-84.48 |
| BE Mechanical Engineering | 73.26-73.26 | 73.26-78.42 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GNT3S Category
BE Computer Engineering Cutoff for MHT-CET (GNT3S Category) expected to fall in the range between 90.17-91.07, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT3S Category with expected range of 90.09-90.09. You can check course wise expected MHT-CET 2025 cutoff for GNT3S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.07-91.07 | 90.17-91.07 |
| BE (Information Technology) | 90.09-90.09 | 90.09-90.09 |
| BE Computer Science and Engineering | 90.41-90.41 | 89.84-90.41 |
| BE Computer Science and Engineering (Artificial Intelligence) | 89.37-89.37 | 89.37-89.37 |
| BE Artificial Intelligence and Data Science | 90.11-90.11 | 89.2-90.11 |
| BE Electronics & Telecom Engineering | 87.14-87.14 | 85.64-87.14 |
| BE Electronics and Computer Engineering | 79.6-79.6 | 79.6-79.6 |
| BE Mechanical Engineering | 76.77-76.77 | 75.4-76.77 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GOBCS Category
BE Computer Engineering Cutoff for MHT-CET (GOBCS Category) expected to fall in the range between 91.8-92.09, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for GOBCS Category with expected range of 90.68-91.01. You can check course wise expected MHT-CET 2025 cutoff for GOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 92.03-92.03 | 91.8-92.09 |
| BE Computer Science and Engineering | 91.01-91.01 | 90.68-91.01 |
| BE Computer Science and Engineering (Artificial Intelligence) | 90.41-90.41 | 90.25-90.41 |
| BE (Information Technology) | 90.3-90.3 | 89.99-90.41 |
| BE Artificial Intelligence and Data Science | 90.04-90.04 | 89.72-90.04 |
| BE Electronics & Telecom Engineering | 87.92-87.92 | 87.69-89.54 |
| BE Electronics and Computer Engineering | 86-86 | 86-86.68 |
| BE Mechanical Engineering | 76.77-76.77 | 75.49-82.45 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GOPENS Category
BE Computer Engineering Cutoff for MHT-CET (GOPENS Category) expected to fall in the range between 92.42-93.1, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for GOPENS Category with expected range of 91.31-92.07. You can check course wise expected MHT-CET 2025 cutoff for GOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 92.45-92.45 | 92.42-93.1 |
| BE Computer Science and Engineering | 91.5-91.5 | 91.31-92.07 |
| BE Computer Science and Engineering (Artificial Intelligence) | 91.01-91.01 | 90.88-91.01 |
| BE (Information Technology) | 90.88-90.88 | 90.3-90.93 |
| BE Artificial Intelligence and Data Science | 90.5-90.5 | 90.14-91.08 |
| BE Electronics & Telecom Engineering | 88.32-88.32 | 88.08-89.59 |
| BE Electronics and Computer Engineering | 86.97-86.97 | 86.97-89.15 |
| BE Mechanical Engineering | 78.84-78.84 | 78.84-83.34 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GSCS Category
BE Computer Science and Engineering Cutoff for MHT-CET (GSCS Category) expected to fall in the range between 82.39-83.47, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GSCS Category with expected range of 81.04-82.84. You can check course wise expected MHT-CET 2025 cutoff for GSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 82.39-82.39 | 82.39-83.47 |
| BE Computer Engineering | 81.58-81.58 | 81.04-82.84 |
| BE Computer Science and Engineering (Artificial Intelligence) | 80.47-80.47 | 80.47-85.19 |
| BE (Information Technology) | 80.86-80.86 | 79.99-80.86 |
| BE Artificial Intelligence and Data Science | 82.13-82.13 | 79.3-84.11 |
| BE Electronics & Telecom Engineering | 75.61-75.61 | 71.85-75.65 |
| BE Electronics and Computer Engineering | 72.89-72.89 | 71.58-79.3 |
| BE Mechanical Engineering | 63.29-63.29 | 62.14-63.29 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LOBCS Category
BE Computer Engineering Cutoff for MHT-CET (LOBCS Category) expected to fall in the range between 92.07-92.52, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for LOBCS Category with expected range of 90.85-91.97. You can check course wise expected MHT-CET 2025 cutoff for LOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 92.52-92.52 | 92.07-92.52 |
| BE Computer Science and Engineering | 90.93-90.93 | 90.85-91.97 |
| BE Computer Science and Engineering (Artificial Intelligence) | 91.71-91.71 | 90.41-91.71 |
| BE (Information Technology) | 90.68-90.68 | 90.25-90.68 |
| BE Artificial Intelligence and Data Science | 90.16-90.16 | 89.85-92.08 |
| BE Electronics & Telecom Engineering | 89.04-89.04 | 88.5-89.04 |
| BE Electronics and Computer Engineering | 86.92-86.92 | 86.92-90.14 |
| BE Mechanical Engineering | 75.36-75.36 | 74.68-75.36 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LOPENS Category
BE Computer Engineering Cutoff for MHT-CET (LOPENS Category) expected to fall in the range between 92.69-93.81, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for LOPENS Category with expected range of 91.57-93.09. You can check course wise expected MHT-CET 2025 cutoff for LOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 92.69-92.69 | 92.69-93.81 |
| BE Computer Science and Engineering | 91.57-91.57 | 91.57-93.09 |
| BE Computer Science and Engineering (Artificial Intelligence) | 91.29-91.29 | 91.29-91.71 |
| BE (Information Technology) | 91.01-91.01 | 90.87-91.08 |
| BE Artificial Intelligence and Data Science | 90.84-90.84 | 90.52-92.24 |
| BE Electronics & Telecom Engineering | 88.76-88.76 | 88.76-89.15 |
| BE Electronics and Computer Engineering | 88.5-88.5 | 88.32-88.5 |
| BE Mechanical Engineering | 79.98-79.98 | 79.98-85.52 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LSCS Category
BE Computer Science and Engineering Cutoff for MHT-CET (LSCS Category) expected to fall in the range between 81.13-84.48, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSCS Category with expected range of 80.86-81.13. You can check course wise expected MHT-CET 2025 cutoff for LSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 84.3-84.3 | 81.13-84.48 |
| BE (Information Technology) | 81.13-81.13 | 80.86-81.13 |
| BE Computer Engineering | 81.77-81.77 | 80.47-84.5 |
| BE Computer Science and Engineering (Artificial Intelligence) | 79.7-79.7 | 79.7-81.01 |
| BE Artificial Intelligence and Data Science | 79.3-79.3 | 79.3-79.98 |
| BE Electronics & Telecom Engineering | 78.62-78.62 | 75.17-78.62 |
| BE Electronics and Computer Engineering | 71.17-71.17 | 71.17-73.63 |
| BE Mechanical Engineering | 36.23-36.23 | 36.23-36.23 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for TFWS Category
BE Computer Science and Engineering Cutoff for MHT-CET (TFWS Category) expected to fall in the range between 92.04-93.68, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering (Artificial Intelligence) is expected to be the second most preferred course for TFWS Category with expected range of 91.36-91.36. You can check course wise expected MHT-CET 2025 cutoff for TFWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 92.04-92.04 | 92.04-93.68 |
| BE Computer Science and Engineering (Artificial Intelligence) | 91.36-91.36 | 91.36-91.36 |
| BE Computer Engineering | 90.69-94.47 | 90.69-94.47 |
| BE Artificial Intelligence and Data Science | 90.16-90.16 | 90.16-94.7 |
| BE (Information Technology) | 87.94-93.19 | 87.94-93.19 |
| BE Electronics and Computer Engineering | 86.24-86.24 | 86.24-88.77 |
| BE Electronics & Telecom Engineering | 80.22-89.29 | 79.36-92.92 |
| BE Mechanical Engineering | 69.66-77.64 | 65.96-82.33 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GNT1S Category
BE Artificial Intelligence and Data Science Cutoff for MHT-CET (GNT1S Category) expected to fall in the range between 89.34-89.34, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GNT1S Category with expected range of 89.29-89.29. You can check course wise expected MHT-CET 2025 cutoff for GNT1S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Artificial Intelligence and Data Science | 89.34-89.34 | 89.34-89.34 |
| BE Computer Engineering | 89.29-89.29 | 89.29-89.29 |
| BE Computer Science and Engineering | 89.15-89.15 | 88.38-89.15 |
| BE (Information Technology) | 86.68-86.68 | 86.68-86.68 |
| BE Electronics & Telecom Engineering | 84.11-84.11 | 83.88-85.11 |
| BE Electronics and Computer Engineering | 82.14-82.14 | 82.14-82.14 |
| BE Mechanical Engineering | 63.65-63.65 | 60.63-63.65 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GVJS Category
BE Computer Science and Engineering Cutoff for MHT-CET (GVJS Category) expected to fall in the range between 87.57-87.68, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GVJS Category with expected range of 86.35-86.35. You can check course wise expected MHT-CET 2025 cutoff for GVJS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 87.68-87.68 | 87.57-87.68 |
| BE Computer Engineering | 86.35-86.35 | 86.35-86.35 |
| BE Artificial Intelligence and Data Science | 84.87-84.87 | 84.04-84.87 |
| BE (Information Technology) | 84.48-84.48 | 82.37-84.48 |
| BE Electronics & Telecom Engineering | 73.44-73.44 | 73.44-79.6 |
| BE Electronics and Computer Engineering | 68.38-68.38 | 68.38-68.38 |
| BE Mechanical Engineering | 66.39-66.39 | 66.39-66.39 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for DEFOBCS Category
BE Computer Science and Engineering Cutoff for MHT-CET (DEFOBCS Category) expected to fall in the range between 87.69-87.69, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for DEFOBCS Category with expected range of 78.01-85.06. You can check course wise expected MHT-CET 2025 cutoff for DEFOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 87.69-87.69 | 87.69-87.69 |
| BE Artificial Intelligence and Data Science | 85.06-85.06 | 78.01-85.06 |
| BE (Information Technology) | 75.36-78.58 | 75.36-79.89 |
| BE Computer Engineering | 76.84-82.33 | 75.35-86.92 |
| BE Electronics & Telecom Engineering | 69.76-78.01 | 69.76-78.01 |
| BE Electronics and Computer Engineering | 60.42-60.42 | 60.42-60.42 |
| BE Mechanical Engineering | - | 27.15-81.13 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LNT2S Category
BE Computer Engineering Cutoff for MHT-CET (LNT2S Category) expected to fall in the range between 89.59-89.59, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for LNT2S Category with expected range of 87.93-87.93. You can check course wise expected MHT-CET 2025 cutoff for LNT2S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.59-89.59 | 89.59-89.59 |
| BE Computer Science and Engineering | 87.93-87.93 | 87.93-87.93 |
| BE Artificial Intelligence and Data Science | 87.78-87.78 | 87.78-87.78 |
| BE Electronics & Telecom Engineering | 85.11-85.11 | 85.11-85.11 |
| BE Electronics and Computer Engineering | 81.94-81.94 | 81.94-81.94 |
| BE Mechanical Engineering | 69.22-69.22 | 69.22-76.76 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LNT3S Category
BE Computer Engineering Cutoff for MHT-CET (LNT3S Category) expected to fall in the range between 90.31-92.24, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for LNT3S Category with expected range of 90.25-90.25. You can check course wise expected MHT-CET 2025 cutoff for LNT3S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 90.31-90.31 | 90.31-92.24 |
| BE Computer Science and Engineering | 90.25-90.25 | 90.25-90.25 |
| BE Artificial Intelligence and Data Science | 88.76-88.76 | 88.5-88.76 |
| BE Electronics and Computer Engineering | 79.89-79.89 | 79.89-79.89 |
| BE Electronics & Telecom Engineering | 79.03-79.03 | 79.03-80.47 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LVJS Category
BE Computer Engineering Cutoff for MHT-CET (LVJS Category) expected to fall in the range between 81.13-87.14, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LVJS Category with expected range of 79.3-79.3. You can check course wise expected MHT-CET 2025 cutoff for LVJS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 81.13-81.13 | 81.13-87.14 |
| BE Electronics & Telecom Engineering | 79.3-79.3 | 79.3-79.3 |
| BE Computer Science and Engineering | 80-80 | 78.67-80 |
| BE Artificial Intelligence and Data Science | 77.16-77.16 | 77.16-77.16 |
| BE Computer Science and Engineering (Artificial Intelligence) | 83.11-83.11 | 72.74-83.11 |
| BE Mechanical Engineering | 53.22-53.22 | 53.22-53.22 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LNT1S Category
BE Computer Science and Engineering Cutoff for MHT-CET (LNT1S Category) expected to fall in the range between 86.72-87.69, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LNT1S Category with expected range of 85.98-85.98. You can check course wise expected MHT-CET 2025 cutoff for LNT1S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 86.72-86.72 | 86.72-87.69 |
| BE (Information Technology) | 85.98-85.98 | 85.98-85.98 |
| BE Computer Engineering | 85.19-85.19 | 85.19-85.19 |
| BE Computer Science and Engineering (Artificial Intelligence) | 84.3-84.3 | 84.3-84.3 |
| BE Mechanical Engineering | 55.94-55.94 | 55.94-55.94 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GSTS Category
BE (Information Technology) Cutoff for MHT-CET (GSTS Category) expected to fall in the range between 90.04-90.59, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSTS Category with expected range of 87.57-87.57. You can check course wise expected MHT-CET 2025 cutoff for GSTS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | - | 90.04-90.59 |
| BE Electronics & Telecom Engineering | - | 87.57-87.57 |
| BE Electronics and Computer Engineering | - | 86.55-86.55 |
| BE Computer Science and Engineering (Artificial Intelligence) | 42.27-42.27 | 42.27-42.74 |
| BE Artificial Intelligence and Data Science | 36.52-36.52 | 36.52-89.97 |
| BE Computer Science and Engineering | 21.3-21.3 | 21.3-90.85 |
| BE Mechanical Engineering | 14.07-14.07 | 14.07-82.83 |
| BE Computer Engineering | 39.57-39.57 | 13.27-39.57 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for DEFROBCS Category
BE Computer Science and Engineering Cutoff for MHT-CET (DEFROBCS Category) expected to fall in the range between 81.8-84.3, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for DEFROBCS Category with expected range of 70.62-70.62. You can check course wise expected MHT-CET 2025 cutoff for DEFROBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 81.8-81.8 | 81.8-84.3 |
| BE (Information Technology) | 70.62-70.62 | 70.62-70.62 |
| BE Computer Engineering | 82.59-86.22 | 40.76-86.22 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for PWDOPENS Category
BE Computer Science and Engineering (Artificial Intelligence) Cutoff for MHT-CET (PWDOPENS Category) expected to fall in the range between 90.85-90.85, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for PWDOPENS Category with expected range of 90.02-90.02. You can check course wise expected MHT-CET 2025 cutoff for PWDOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering (Artificial Intelligence) | - | 90.85-90.85 |
| BE Artificial Intelligence and Data Science | - | 90.02-90.02 |
| BE (Information Technology) | - | 90.02-90.41 |
| BE Electronics & Telecom Engineering | - | 87.6-87.6 |
| BE Electronics and Computer Engineering | - | 86.93-86.93 |
| BE Mechanical Engineering | - | 79.69-79.69 |
| BE Computer Engineering | 63.82-63.82 | 63.82-92.55 |
| BE Computer Science and Engineering | 1.69-1.69 | 1.69-91.87 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LSTS Category
BE Computer Science and Engineering Cutoff for MHT-CET (LSTS Category) expected to fall in the range between 91.29-91.29, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Science and Engineering (Artificial Intelligence) is expected to be the second most preferred course for LSTS Category with expected range of 90.93-90.93. You can check course wise expected MHT-CET 2025 cutoff for LSTS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | - | 91.29-91.29 |
| BE Computer Science and Engineering (Artificial Intelligence) | - | 90.93-90.93 |
| BE Artificial Intelligence and Data Science | - | 90.25-90.25 |
| BE (Information Technology) | - | 90.04-90.62 |
| BE Electronics & Telecom Engineering | - | 87.68-87.68 |
| BE Electronics and Computer Engineering | - | 86.97-86.97 |
| BE Mechanical Engineering | - | 81.77-81.77 |
| BE Computer Engineering | 39.36-39.36 | 39.36-92.26 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for DEFSCS Category
BE Computer Engineering Cutoff for MHT-CET (DEFSCS Category) expected to fall in the range between 81.37-81.63, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for DEFSCS Category with expected range of 80-83.2. You can check course wise expected MHT-CET 2025 cutoff for DEFSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 81.37-81.63 |
| BE (Information Technology) | - | 80-83.2 |
| BE Artificial Intelligence and Data Science | - | 79.03-79.03 |
| BE Electronics & Telecom Engineering | - | 73.44-80.59 |
| BE Electronics and Computer Engineering | - | 71.82-71.82 |
| BE Computer Science and Engineering | 65.63-65.63 | 65.63-65.63 |
| BE Mechanical Engineering | - | 60.85-66.3 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for ORPHAN Category
BE Computer Engineering Cutoff for MHT-CET (ORPHAN Category) expected to fall in the range between 90.11-91.75, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for ORPHAN Category with expected range of 89.97-89.97. You can check course wise expected MHT-CET 2025 cutoff for ORPHAN Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 90.11-91.75 |
| BE Artificial Intelligence and Data Science | - | 89.97-89.97 |
| BE (Information Technology) | - | 89.78-90.16 |
| BE Electronics & Telecom Engineering | - | 86.89-87.41 |
| BE Electronics and Computer Engineering | - | 86.62-86.62 |
| BE Mechanical Engineering | - | 70.41-79.69 |
| BE Computer Science and Engineering | 43.47-43.47 | 43.47-91.05 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for PWDOBCS Category
BE Computer Science and Engineering Cutoff for MHT-CET (PWDOBCS Category) expected to fall in the range between 90.67-90.67, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for PWDOBCS Category with expected range of 90.31-90.31. You can check course wise expected MHT-CET 2025 cutoff for PWDOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | - | 90.67-90.67 |
| BE (Information Technology) | - | 90.31-90.31 |
| BE Artificial Intelligence and Data Science | - | 89.99-89.99 |
| BE Electronics and Computer Engineering | - | 87.95-89.2 |
| BE Electronics & Telecom Engineering | - | 87.92-87.92 |
| BE Mechanical Engineering | - | 79.69-81.13 |
| BE Computer Engineering | - | 63.82-63.82 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GOBCH Category
BE Computer Engineering Cutoff for MHT-CET (GOBCH Category) expected to fall in the range between 82.44-93.83, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOBCH Category with expected range of 80.82-89.72. You can check course wise expected MHT-CET 2025 cutoff for GOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 83.69-90.8 | 82.44-93.83 |
| BE (Information Technology) | 81.45-89.18 | 80.82-89.72 |
| BE Electronics & Telecom Engineering | 56.56-85.93 | 56.56-85.93 |
| BE Mechanical Engineering | 7.07-62.79 | 7.07-67.86 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GOPENH Category
BE Computer Engineering Cutoff for MHT-CET (GOPENH Category) expected to fall in the range between 85.31-94.57, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENH Category with expected range of 82.15-91.86. You can check course wise expected MHT-CET 2025 cutoff for GOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.91-91.63 | 85.31-94.57 |
| BE (Information Technology) | 88.66-89.7 | 82.15-91.86 |
| BE Electronics & Telecom Engineering | 80.63-86.57 | 80.63-89.33 |
| BE Mechanical Engineering | 23.12-73.43 | 23.12-75.35 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GSCO Category
BE Computer Engineering Cutoff for MHT-CET (GSCO Category) expected to fall in the range between 74.35-89.03, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSCO Category with expected range of 72.12-85.34. You can check course wise expected MHT-CET 2025 cutoff for GSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 74.35-89.03 | 74.35-89.03 |
| BE (Information Technology) | 72.12-85.34 | 72.12-85.34 |
| BE Electronics & Telecom Engineering | 62.3-83.54 | 62.3-83.54 |
| BE Mechanical Engineering | 9.36-50.04 | 9.36-54.36 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LOPENH Category
BE Computer Engineering Cutoff for MHT-CET (LOPENH Category) expected to fall in the range between 86.71-91.63, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOPENH Category with expected range of 81.9-92.92. You can check course wise expected MHT-CET 2025 cutoff for LOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 87.07-91.63 | 86.71-91.63 |
| BE (Information Technology) | 81.9-90.08 | 81.9-92.92 |
| BE Electronics & Telecom Engineering | 68.99-86.97 | 68.99-88.51 |
| BE Mechanical Engineering | 17-66.19 | 17-78.44 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GNT1H Category
BE Computer Engineering Cutoff for MHT-CET (GNT1H Category) expected to fall in the range between 71.24-88.63, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT1H Category with expected range of 69.04-82.6. You can check course wise expected MHT-CET 2025 cutoff for GNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 71.24-88.07 | 71.24-88.63 |
| BE (Information Technology) | 69.04-82.42 | 69.04-82.6 |
| BE Mechanical Engineering | 72.15-72.15 | 65.88-72.15 |
| BE Electronics & Telecom Engineering | 54.52-78.92 | 26.69-78.92 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GNT2O Category
BE (Information Technology) Cutoff for MHT-CET (GNT2O Category) expected to fall in the range between 87.93-87.93, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GNT2O Category with expected range of 82.71-84.85. You can check course wise expected MHT-CET 2025 cutoff for GNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 87.93-87.93 | 87.93-87.93 |
| BE Electronics & Telecom Engineering | 82.71-82.71 | 82.71-84.85 |
| BE Computer Engineering | 80.55-91.07 | 74.52-91.07 |
| BE Mechanical Engineering | 58.58-58.58 | 58.58-67.05 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GSCH Category
BE Computer Engineering Cutoff for MHT-CET (GSCH Category) expected to fall in the range between 60.85-86.63, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSCH Category with expected range of 56.25-86.12. You can check course wise expected MHT-CET 2025 cutoff for GSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 60.85-79.82 | 60.85-86.63 |
| BE (Information Technology) | 56.25-77.17 | 56.25-86.12 |
| BE Mechanical Engineering | 25.21-57.87 | 21.91-57.87 |
| BE Electronics & Telecom Engineering | 3.58-71.6 | 3.58-71.6 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LOBCO Category
BE Computer Engineering Cutoff for MHT-CET (LOBCO Category) expected to fall in the range between 78.92-92.43, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOBCO Category with expected range of 78.86-90.39. You can check course wise expected MHT-CET 2025 cutoff for LOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 83.34-91.25 | 78.92-92.43 |
| BE (Information Technology) | 79.95-90.35 | 78.86-90.39 |
| BE Electronics & Telecom Engineering | 65.8-88.02 | 65.8-88.02 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LOPENO Category
BE Computer Engineering Cutoff for MHT-CET (LOPENO Category) expected to fall in the range between 80.91-92.12, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOPENO Category with expected range of 79.36-90.83. You can check course wise expected MHT-CET 2025 cutoff for LOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 88.75-91.61 | 80.91-92.12 |
| BE (Information Technology) | 83.98-90.83 | 79.36-90.83 |
| BE Electronics & Telecom Engineering | 68.32-88.16 | 68.32-88.6 |
| BE Mechanical Engineering | 2.42-60.6 | 2.42-60.6 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GNT2H Category
BE Computer Engineering Cutoff for MHT-CET (GNT2H Category) expected to fall in the range between 84.09-89.45, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT2H Category with expected range of 81.61-89.45. You can check course wise expected MHT-CET 2025 cutoff for GNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 85.08-89.45 | 84.09-89.45 |
| BE (Information Technology) | 81.61-89.45 | 81.61-89.45 |
| BE Electronics & Telecom Engineering | 52.01-83.74 | 52.01-83.74 |
| BE Mechanical Engineering | 71.72-71.72 | 39.61-71.72 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GSEBCH Category
BE Computer Engineering Cutoff for MHT-CET (GSEBCH Category) expected to fall in the range between 89.49-89.95, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSEBCH Category with expected range of 87.08-87.51. You can check course wise expected MHT-CET 2025 cutoff for GSEBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.95-89.95 | 89.49-89.95 |
| BE (Information Technology) | 87.51-87.51 | 87.08-87.51 |
| BE Electronics & Telecom Engineering | 79.13-79.13 | 79.13-84.89 |
| BE Mechanical Engineering | 44.48-44.48 | 44.48-44.48 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LNT3H Category
BE (Information Technology) Cutoff for MHT-CET (LNT3H Category) expected to fall in the range between 86.85-86.85, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LNT3H Category with expected range of 86.31-88.36. You can check course wise expected MHT-CET 2025 cutoff for LNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 86.85-86.85 | 86.85-86.85 |
| BE Computer Engineering | 88.36-88.36 | 86.31-88.36 |
| BE Electronics & Telecom Engineering | 69.28-69.28 | 69.28-70.25 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LSCH Category
BE Computer Engineering Cutoff for MHT-CET (LSCH Category) expected to fall in the range between 67.84-80.97, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSCH Category with expected range of 51.9-78.35. You can check course wise expected MHT-CET 2025 cutoff for LSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 67.84-80.02 | 67.84-80.97 |
| BE (Information Technology) | 51.9-76.93 | 51.9-78.35 |
| BE Electronics & Telecom Engineering | 35.43-66.84 | 35.43-66.84 |
| BE Mechanical Engineering | 38.87-38.9 | 22.91-38.9 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LSEBCO Category
BE Computer Engineering Cutoff for MHT-CET (LSEBCO Category) expected to fall in the range between 89.49-91.3, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSEBCO Category with expected range of 89.48-90.49. You can check course wise expected MHT-CET 2025 cutoff for LSEBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.3-91.3 | 89.49-91.3 |
| BE (Information Technology) | 90.49-90.49 | 89.48-90.49 |
| BE Electronics & Telecom Engineering | 88.02-88.02 | 86.9-88.02 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LNT3O Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LNT3O Category) expected to fall in the range between 67.5-67.62, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. You can check course wise expected MHT-CET 2025 cutoff for LNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 67.62-67.62 | 67.5-67.62 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LSCO Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LSCO Category) expected to fall in the range between 74.38-74.38, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LSCO Category with expected range of 65.8-83.39. You can check course wise expected MHT-CET 2025 cutoff for LSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 74.38-74.38 | 74.38-74.38 |
| BE Computer Engineering | 65.8-82.48 | 65.8-83.39 |
| BE (Information Technology) | 64.03-81.49 | 64.03-81.49 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LNT2H Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LNT2H Category) expected to fall in the range between 78.22-85.78, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LNT2H Category with expected range of 75.05-91.13. You can check course wise expected MHT-CET 2025 cutoff for LNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 85.78-85.78 | 78.22-85.78 |
| BE Computer Engineering | 76.23-91.13 | 75.05-91.13 |
| BE Mechanical Engineering | 38.99-65.29 | 38.99-66.05 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GVJH Category
BE Computer Engineering Cutoff for MHT-CET (GVJH Category) expected to fall in the range between 78.58-82.71, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GVJH Category with expected range of 30.33-78.66. You can check course wise expected MHT-CET 2025 cutoff for GVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 78.58-82.71 | 78.58-82.71 |
| BE (Information Technology) | 30.33-78.66 | 30.33-78.66 |
| BE Mechanical Engineering | 27.15-57.25 | 27.15-57.25 |
| BE Electronics & Telecom Engineering | 2.49-77.08 | 2.49-77.08 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LSEBCH Category
BE Computer Engineering Cutoff for MHT-CET (LSEBCH Category) expected to fall in the range between 89.28-89.28, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSEBCH Category with expected range of 88.89-88.89. You can check course wise expected MHT-CET 2025 cutoff for LSEBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.28-89.28 | 89.28-89.28 |
| BE (Information Technology) | 88.89-88.89 | 88.89-88.89 |
| BE Electronics & Telecom Engineering | 82.78-82.78 | 82.78-82.78 |
| BE Mechanical Engineering | 64.95-64.95 | 64.95-64.95 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LNT1O Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LNT1O Category) expected to fall in the range between 77.84-77.84, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. You can check course wise expected MHT-CET 2025 cutoff for LNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 77.84-77.84 | 77.84-77.84 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LVJO Category
BE Computer Engineering Cutoff for MHT-CET (LVJO Category) expected to fall in the range between 69.6-86.17, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LVJO Category with expected range of 57.05-57.05. You can check course wise expected MHT-CET 2025 cutoff for LVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 86.17-86.17 | 69.6-86.17 |
| BE Electronics & Telecom Engineering | 57.05-57.05 | 57.05-57.05 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GNT3H Category
BE Computer Engineering Cutoff for MHT-CET (GNT3H Category) expected to fall in the range between 83.44-89.47, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT3H Category with expected range of 77.72-87.89. You can check course wise expected MHT-CET 2025 cutoff for GNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 83.44-89.47 | 83.44-89.47 |
| BE (Information Technology) | 77.72-87.89 | 77.72-87.89 |
| BE Mechanical Engineering | 50.04-50.04 | 34.67-72.32 |
| BE Electronics & Telecom Engineering | 14.95-74.19 | 14.95-74.51 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GNT1O Category
BE (Information Technology) Cutoff for MHT-CET (GNT1O Category) expected to fall in the range between 88.19-88.19, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for GNT1O Category with expected range of 64.1-64.1. You can check course wise expected MHT-CET 2025 cutoff for GNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 88.19-88.19 | 88.19-88.19 |
| BE Mechanical Engineering | - | 64.1-64.1 |
| BE Computer Engineering | 80.23-90.83 | 58.98-91.89 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LNT2O Category
BE Computer Engineering Cutoff for MHT-CET (LNT2O Category) expected to fall in the range between 89.19-89.19, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LNT2O Category with expected range of 88.93-88.93. You can check course wise expected MHT-CET 2025 cutoff for LNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 89.19-89.19 |
| BE (Information Technology) | 88.93-88.93 | 88.93-88.93 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LVJH Category
BE Computer Engineering Cutoff for MHT-CET (LVJH Category) expected to fall in the range between 67.95-70.93, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LVJH Category with expected range of 60.3-65.29. You can check course wise expected MHT-CET 2025 cutoff for LVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 67.95-70.93 | 67.95-70.93 |
| BE (Information Technology) | 65.29-65.29 | 60.3-65.29 |
| BE Mechanical Engineering | 57.05-57.05 | 57.05-57.05 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LNT1H Category
BE Computer Engineering Cutoff for MHT-CET (LNT1H Category) expected to fall in the range between 83.41-83.41, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LNT1H Category with expected range of 76.14-77.64. You can check course wise expected MHT-CET 2025 cutoff for LNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 83.41-83.41 | 83.41-83.41 |
| BE (Information Technology) | 76.14-76.14 | 76.14-77.64 |
| BE Mechanical Engineering | 58.12-58.12 | 58.12-58.12 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GVJO Category
BE (Information Technology) Cutoff for MHT-CET (GVJO Category) expected to fall in the range between 82.33-89.81, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GVJO Category with expected range of 77.72-91.24. You can check course wise expected MHT-CET 2025 cutoff for GVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 86.86-89.81 | 82.33-89.81 |
| BE Computer Engineering | 77.72-91.24 | 77.72-91.24 |
| BE Mechanical Engineering | 55.36-55.36 | 55.36-55.36 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GSTH Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (GSTH Category) expected to fall in the range between 85.34-85.34, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for GSTH Category with expected range of 45.52-68.48. You can check course wise expected MHT-CET 2025 cutoff for GSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 85.34-85.34 |
| BE Mechanical Engineering | 45.52-45.52 | 45.52-68.48 |
| BE (Information Technology) | 10.49-10.49 | 10.49-89.32 |
| BE Computer Engineering | 6.37-45.85 | 1.22-45.85 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LSTH Category
BE (Information Technology) Cutoff for MHT-CET (LSTH Category) expected to fall in the range between 88.63-88.63, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LSTH Category with expected range of 86.2-86.2. You can check course wise expected MHT-CET 2025 cutoff for LSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | - | 88.63-88.63 |
| BE Electronics & Telecom Engineering | - | 86.2-86.2 |
| BE Computer Engineering | 54.39-54.39 | 54.39-89.89 |
| BE Mechanical Engineering | 25.78-25.78 | 25.78-69.81 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LSTO Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LSTO Category) expected to fall in the range between 87.45-87.45, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LSTO Category with expected range of 48.66-91.63. You can check course wise expected MHT-CET 2025 cutoff for LSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 87.45-87.45 |
| BE Computer Engineering | 48.66-48.66 | 48.66-91.63 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GNT3O Category
BE Computer Engineering Cutoff for MHT-CET (GNT3O Category) expected to fall in the range between 77.72-91.71, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for GNT3O Category with expected range of 7.62-49.47. You can check course wise expected MHT-CET 2025 cutoff for GNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 77.72-91.71 | 77.72-91.71 |
| BE Mechanical Engineering | - | 7.62-49.47 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GOBCO Category
BE Computer Engineering Cutoff for MHT-CET (GOBCO Category) expected to fall in the range between 87.3-92.84, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOBCO Category with expected range of 83.97-91.74. You can check course wise expected MHT-CET 2025 cutoff for GOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 88.18-92.84 | 87.3-92.84 |
| BE (Information Technology) | 87.3-91.74 | 83.97-91.74 |
| BE Electronics & Telecom Engineering | 70.71-83.88 | 70.71-86.9 |
| BE Mechanical Engineering | 12.09-19.1 | 12.09-69.8 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GOPENO Category
BE Computer Engineering Cutoff for MHT-CET (GOPENO Category) expected to fall in the range between 88.77-93.1, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENO Category with expected range of 84.78-91.74. You can check course wise expected MHT-CET 2025 cutoff for GOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.11-93.1 | 88.77-93.1 |
| BE (Information Technology) | 87.54-91.74 | 84.78-91.74 |
| BE Electronics & Telecom Engineering | 72.96-84.29 | 72.96-88.55 |
| BE Mechanical Engineering | 0.22-55.27 | 0.22-79.53 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GSEBCO Category
BE Computer Engineering Cutoff for MHT-CET (GSEBCO Category) expected to fall in the range between 90.46-90.46, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSEBCO Category with expected range of 90.02-91.13. You can check course wise expected MHT-CET 2025 cutoff for GSEBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 90.46-90.46 |
| BE (Information Technology) | - | 90.02-91.13 |
| BE Electronics & Telecom Engineering | - | 86.12-86.12 |
| BE Mechanical Engineering | - | 68.07-68.07 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for GSTO Category
BE (Information Technology) Cutoff for MHT-CET (GSTO Category) expected to fall in the range between 89.92-89.92, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSTO Category with expected range of 86.86-86.86. You can check course wise expected MHT-CET 2025 cutoff for GSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | - | 89.92-89.92 |
| BE Electronics & Telecom Engineering | - | 86.86-86.86 |
| BE Mechanical Engineering | - | 73.85-73.85 |
| BE Computer Engineering | 63.71-63.71 | 55.27-90.07 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for PWDOBCH Category
BE Computer Engineering Cutoff for MHT-CET (PWDOBCH Category) expected to fall in the range between 89.89-89.89, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for PWDOBCH Category with expected range of 88.89-88.89. You can check course wise expected MHT-CET 2025 cutoff for PWDOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 89.89-89.89 |
| BE (Information Technology) | - | 88.89-88.89 |
| BE Electronics & Telecom Engineering | - | 84.8-84.8 |
| BE Mechanical Engineering | - | 69.63-69.63 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for PWDOPENH Category
BE (Information Technology) Cutoff for MHT-CET (PWDOPENH Category) expected to fall in the range between 89.19-89.19, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for PWDOPENH Category with expected range of 85.34-85.34. You can check course wise expected MHT-CET 2025 cutoff for PWDOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | - | 89.19-89.19 |
| BE Electronics & Telecom Engineering | - | 85.34-85.34 |
| BE Mechanical Engineering | - | 68.91-68.91 |
| BE Computer Engineering | 3.6-3.6 | 3.6-89.39 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for PWDSCH Category
BE Computer Engineering Cutoff for MHT-CET (PWDSCH Category) expected to fall in the range between 79.49-79.49, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for PWDSCH Category with expected range of 77.6-77.6. You can check course wise expected MHT-CET 2025 cutoff for PWDSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 79.49-79.49 |
| BE (Information Technology) | - | 77.6-77.6 |
| BE Mechanical Engineering | - | 73.43-73.43 |
| BE Electronics & Telecom Engineering | - | 71.72-71.72 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for LOBCH Category
BE Computer Engineering Cutoff for MHT-CET (LOBCH Category) expected to fall in the range between 81.29-89.98, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOBCH Category with expected range of 78.58-88.79. You can check course wise expected MHT-CET 2025 cutoff for LOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 83.18-88.8 | 81.29-89.98 |
| BE (Information Technology) | 80.91-88.79 | 78.58-88.79 |
| BE Electronics & Telecom Engineering | 56.56-81.85 | 56.56-82.94 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for DEFRSCS Category
BE Computer Engineering Cutoff for MHT-CET (DEFRSCS Category) expected to fall in the range between 12.69-42.02, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. You can check course wise expected MHT-CET 2025 cutoff for DEFRSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 12.69-42.02 | 12.69-42.02 |
Nutan Maharashtra Institute of Engineering and Technology Talegaon MHT-CET Cutoff 2025 for AI Category
BE Mechanical Engineering Cutoff for MHT-CET (AI Category) expected to fall in the range between 63.09-63.09, which makes it the most in-demand course for Nutan Maharashtra Institute of Engineering and Technology Talegaon. You can check course wise expected MHT-CET 2025 cutoff for AI Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechanical Engineering | - | 63.09-63.09 |
Also Check:
![Defence Institute of Advanced Technology - [DIAT]](https://image-static.collegedunia.com/public/college_data/images/appImage/25693_X20.jpg?h=111.44&w=263&mode=stretch)
![Indian Institute of Information Technology - [IIIT]](https://image-static.collegedunia.com/public/college_data/images/appImage/148497797557979ap.jpg?h=111.44&w=263&mode=stretch)
![College of Engineering - [COEP]](https://image-static.collegedunia.com/public/college_data/images/appImage/28215_ENGINEERING_NEW.jpg?h=111.44&w=263&mode=stretch)
![Pune Institute of Computer Technology- [PICT]](https://image-static.collegedunia.com/public/college_data/images/appImage/14624_PICT_New.jpg?h=111.44&w=263&mode=stretch)
![MIT World Peace University - [MIT-WPU]](https://image-static.collegedunia.com/public/college_data/images/appImage/1707286572Capture.jpeg?h=111.44&w=263&mode=stretch)
![Nutan College of Engineering and Research - [NCER]](https://image-static.collegedunia.com/public/college_data/images/logos/1603280551ncerlogo.png?h=72&w=72&mode=stretch)
![JSPM's Imperial College of Engineering and Research - [ICOER]](https://image-static.collegedunia.com/public/college_data/images/logos/1605088705Logo.jpg?h=72&w=72&mode=stretch)
![Dhole Patil College of Engineering - [DPCOE]](https://image-static.collegedunia.com/public/college_data/images/logos/1519149774Capture4.jpg?h=72&w=72&mode=stretch)
![NBN Sinhgad School of Engineering - [NBNSSOE]](https://image-static.collegedunia.com/public/college_data/images/logos/1394714284N.B.N. Sinhgad School of Engineering.png?h=72&w=72&mode=stretch)
![Indira College of Engineering & Management - [ICEM]](https://image-static.collegedunia.com/public/college_data/images/logos/14955431431425965458png.png?h=72&w=72&mode=stretch)
![JSPM Narhe Technical Campus - [JSPM NTC] Narhe](https://image-static.collegedunia.com/public/college_data/images/logos/1731488373Screenshot20241113142909.png?h=72&w=72&mode=stretch)
![Zeal Education Society's Zeal College of Engineering and Research - [ZCOER]](https://image-static.collegedunia.com/public/college_data/images/logos/1628686170logoooo.png?h=72&w=72&mode=stretch)
![Sinhgad Academy of Engineering - [SAE] Kondhawa](https://image-static.collegedunia.com/public/college_data/images/logos/1476783038Sinhgadcollegelogo.jpg?h=72&w=72&mode=stretch)
![Progressive Education Society's Modern College of Engineering - [MCOE]](https://image-static.collegedunia.com/public/college_data/images/logos/1411122009cba.png?h=72&w=72&mode=stretch)
![JSPM'S Rajarshi Shahu College of Engineering - [RSCOE] Tathawade](https://image-static.collegedunia.com/public/college_data/images/logos/1705988727JSPMlogo.jpeg?h=72&w=72&mode=stretch)
![Marathwada Mitramandal's Institute of Technology - [MMIT] Lohgaon](https://image-static.collegedunia.com/public/college_data/images/logos/1689159264mmitlogo1.png?h=72&w=72&mode=stretch)
![Bhivarabai Sawant College of Engineering & Research-[BSCOER] Narhe](https://image-static.collegedunia.com/public/college_data/images/logos/1607159733bscoerlogo.png?h=72&w=72&mode=stretch)
![Sinhgad Institute of Technology and Science -[SITS] Narhe](https://image-static.collegedunia.com/public/college_data/images/logos/col28049.jpg?h=72&w=72&mode=stretch)
![Smt Kashibai Navale College of Engineering - [SKNCOE] Vadgaon](https://image-static.collegedunia.com/public/college_data/images/logos/1476774738Sinhgadcollegelogo.jpg?h=72&w=72&mode=stretch)
![Modern Education Society's Wadia College of Engineering - [MESWCOE]](https://image-static.collegedunia.com/public/college_data/images/logos/1709880419mainmescoe1.png?h=72&w=72&mode=stretch)
![Jayawantrao Sawant College of Engineering- [JSCOE]](https://image-static.collegedunia.com/public/college_data/images/logos/1748157080JSCOElogo.png?h=72&w=72&mode=stretch)
Comments