BITSAT 2026 May 25 Slot 1 Expected Marks vs Rank

Candidates scoring 350 marks in BITSAT 2026 May 25 Slot 1 can expect a rank of around 300, and a score of 300+ can have a rank of around 2300+, depending on the shift difficulty.

BITSAT 2026 May 25 Slot 1 paper is expected to be moderate to slightly tough, where the physics section is expected to be formula-based.
A student scoring around 380 is considered an outstanding performance, where students can expect a rank among 1- 300 candidates.
Scoring around 350+ in BITSAT 2026 May 25 Slot 1 will get admission in the BITS Pilani CSE programme.
You will get admission in lower branches at BITS Hyderabad and BITS Goa with a score of around 250 in BITSAT 2026, May 25 Slot 1, as it corresponds to a rank of around 22000+.

Related Articles:

BITSAT 2026 May 25 Slot 1 Expected Marks vs Rank

Key Summary

BITS admission across all campuses is based on the best scores among both sessions and not on the percentile.
BITSAT 2026 May 25 Slot 1 timing is from 9:00 AM to 12:00 PM.
The results for BITSAT 2026 will be published around July 2026 on the official website at admissions.bits-pilani.ac.in.
A score between 225- 250 in BITSAT 2026 is considered a below-average performance, which makes your admission only in Chemical and Civil/BPharm courses at BITS Hyderabad and BITS Goa.

BITSAT 2026 May 25 Slot 1: Marks vs Rank

The following table shows the BITSAT 2026 May 25 Slot 1 marks vs expected rank based on previous years' trends and session 1 rank analysis.

Candidates with a score of 380+ will easily get CSE at BITS Pilani, as the rank is expected to be between 1 and 300+.
You are considered to have a good score by getting 300 and 350, as it is expected to rank between 2000 and 8700+ candidates.
With a score of 250 in BITSAT 2026, May 25 Slot 1 is considered an average score, making your admission in the lower branches at BITS Hyderabad and BITS Goa.
Below 175, your expected rank for BITSAT 2026 May 25 Slot 1 is above 35000, making your admission in BPharm courses only depending on the seat availability.

Score	Expected Rank	Category Standing
380+	1- 304	Elite BITS Campus: BITS Pilani
351- 379	2319- 305	High Merit
301- 350	8789- 2320	Good
251- 300	22441- 8790	Averagw
226- 250	32500- 22441	Below Average
175- 225	32501- 35000	Low
Below 175	35000+	Very Low

Note: The above table is prepared based on the previous year's rank vs mark. The 2026 cutoff will be released on the official website.

BITSAT 2026 May 25 Slot 1: Marks vs Rank

Related Articles:

Ques. What rank can I expect for 300 marks in BITSAT 2026 May 25 Slot 1?

Ans. According to previous years' trend analysis, candidates scoring around 300 marks can expect a rank of around 8700+, which is considered a good performance. With 300 marks in BITSAT 2026 May 25 Slot 1 paper, you will get admission in ECE, EEE and Chemical Engineering at BITS Hyderabad and BITS Goa.

Ques. How does being in Session 2 Day 2 Slot 1 affect my BITSAT rank?

Ans. Candidates appearing in Session 2, Day 2 Slot 1, will not be affected by the marks. The results are published based on your best scores in both sessions, so there is no advantage or disadvantage to appearing in the first slot.

BITSAT 2026 May 25 Slot 1: Expected Difficulty Level

The following table shows the expected difficulty level for May 25 Slot 1 and good attempts based on the previous years' trends.

Physics is expected to be moderate with formula-based questions, and the expected questions will come from high-weightage topics.
Chemistry is expected to be easy to moderate based on previous shifts' analysis.
Maths is expected to be moderate to tough, like every year and has the highest section-wise marks.

Subjects	Number of Questions	Maximum Marks	Expected Difficulty	Good Attempts
Physics	30	90	Moderate	22- 26
Chemistry	30	90	Easy to Moderate	24- 28
Maths	40	120	Moderate to Tough	28- 34
English Proficiency	10	30	Easy	9- 10
Logical Reasoning	20	60	Easy to Moderate	16- 19
Total	130	390	Moderate	99- 117

BITSAT 2026 May 25 Slot 1: Expected Difficulty Level

Related Articles:

BITSAT 2026 May 25 Slot 1: College Options Based On Your Marks

The following table shows the college options based on your BITSAT 2026 May 25 Slot 1 marks vs. rank analysis.

You will get BITS Pilani CSE and other top branches by scoring above 380+, as it corresponds to a rank below 300.
Candidates scoring around 250+ will get CSE, ECE, EEE and other branches at BITS Pilani and BITS Goa campus, as it will correspond to a rank between 305- 2300+.
You will have a rank of around 15000- 32000+ by scoring between 175- 270, helping you secure a seat in the lower domains at the BITS Hyderabad campus.

Score Range	Expected Rank	Campus Options	Available Branches
380+	1- 304	BITS Pilani	CSE, ECE
351 – 379	25319- 305	BITS Pilani and Goa	CSE ECE, EEE and other branches
306- 350	600- 2320	BITS Hyderabad, Goa and Pilani	ECE, EEE, Mechanical, CSE (Goa and Hyd)
270 – 305	15000- 6001	BITS Goa / Hyderabad	Mechanical, ECE, EEE, Chemical
220 – 269	32000- 15001	BITS Hyderabad / Goa	Chemical, Civil, B.Pharm, Integrated MSc
175- 219	35000- 32000	BITS Hyderabad	B.Pharm, Integrated MSc Programmes
Below 175	Above 35000	BITS Hyderabad	Limited, depending on seat availability

Note: BITS Pilani official admissions data for 2026 is based on 2024 and 2025. All 2026 values will be released on admissions.bits-pilani.ac.in

You can check the campuses available based on your BITSAT Expected marks using Collegedunia’s BITSAT College Predictor by clicking on the link below:

Check BITSAT College Predictor 2026: Top Colleges Based on BITSAT Scores

Related Articles:

Ques. What is the minimum score to get any branch at BITS Pilani in BITSAT 2026?

Ans. To get admission in the lower branches, such as EE, ME, CE and Civil engineering, you need to have a BITSAT score of around 220- 260+ to get admission and secure a seat in the BITS Pilani campus, as it is the most competitive among all BITS campuses

Ques. Which BITSAT 2026 slot has the best rank outcome among sessions 1 and 2?

Ans. There is no such outcome as the final cutoff score will be published based on the highest score a student has obtained in sessions 1 and 2.

BITSAT Marks vs Rank: Reddit Discussion

According to a Reddit post, candidates wanted to know the marks required to get a 500 rank in the BITSAT examination. In the discussion, candidates need to score 340- 380 to get a BITSAT rank of 500.

Source: Reddit

Related Articles:

BITSAT Marks vs Rank Last 3 Years’ Data

You can check the last three years BITSAT Cutoff marks from the table below:

Year	Document	PDF Link
2025	BITSAT 2025 Official Cutoff Marks	Check Here
2024	BITSAT 2024 Official Cutoff Marks	Check Here
2023	BITSAT 2023 Official Cutoff Marks	Check Here

Related Article:

Check BITSAT Counselling 2026: Dates, Choice Filling, Fees and Seat Allotment at bits-pilani.ac.in

Ques. What are the BITSAT cutoff marks for CSE at all three campuses?

Ans. The BITSAT cutoff score for CSE programme is competitive across all campuses. Candidates seeking CSE admission at BITS Pilani need to score 306-320+ marks; BITS Goa requires 290-300 marks; and BITS Hyderabad requires 280-290 marks for the CSE programme.

Ques. Does BITSAT release category-wise cutoff scores?

Ans. No, BITSAT does not release any category-wise cutoff scores. The admission is based on merit, which means performance in the BITSAT examination to be eligible across the BITS campuses.

Ques. Is 250 a good score in BITSAT 2026?

Ans. 250 score in BITSAT is considered an average performance. Candidates with a score of 250 are expected to have a rank range of 8800 - 22400, and will have the opportunity to pursue Mechanical, Chemical or ECE at BITS Hyderabad and BITS Goa.

BITSAT 2026 May 25 Slot 1 Expected Marks vs Rank

Key Summary

BITSAT 2026 May 25 Slot 1: Marks vs Rank

BITSAT 2026 May 25 Slot 1: Expected Difficulty Level

BITSAT 2026 May 25 Slot 1: College Options Based On Your Marks

BITSAT Marks vs Rank: Reddit Discussion

BITSAT Marks vs Rank Last 3 Years’ Data

BITSAT Questions

1.
If A and B are symmetric matrices of same order such that \(\text{AB} + \text{BA} = \text{X}\) and \(\text{AB} - \text{BA} = \text{Y}\), then \((\text{XY})^\text{T} =\)

2.
\(0.1\text{ m}\) of urea and \(0.05\text{ m}\) of \(\text{CaCl}_2\) are dissolved separately in equal volumes of water. Which solution will have higher elevation in boiling point?

3.
If the ionic product of \(\text{Ni(OH)}_2\) is \(1.9 \times 10^{-15}\), then the molar solubility of \(\text{Ni(OH)}_2\) in \(1.0\text{ M NaOH}\) is

4.
The solubility of \(\text{Pb(OH)}_2\) in water is \(6.7 \times 10^{-6}\text{ M}\). Its solubility in a buffer solution of \(\text{pH} = 8\) would be:

5.
A radioactive sample has a half-life of 10 days. The fraction of the initial nuclei decayed after 40 days is:

6.
A block of mass $M$ attached to a horizontal spring of spring constant $k$ executes SHM with amplitude $A$. When the block passes through its mean position, a small piece of mass $m$ is dropped vertically onto it and sticks to it. The new amplitude of oscillation is:

Comments

SUBSCRIBE TO OUR NEWS LETTER

Key Summary

BITSAT 2026 May 25 Slot 1: Marks vs Rank

BITSAT 2026 May 25 Slot 1: Expected Difficulty Level

BITSAT 2026 May 25 Slot 1: College Options Based On Your Marks

BITSAT Marks vs Rank: Reddit Discussion

BITSAT Marks vs Rank Last 3 Years’ Data

BITSAT Questions

1.If A and B are symmetric matrices of same order such that \(\text{AB} + \text{BA} = \text{X}\) and \(\text{AB} - \text{BA} = \text{Y}\), then \((\text{XY})^\text{T} =\)

2.\(0.1\text{ m}\) of urea and \(0.05\text{ m}\) of \(\text{CaCl}_2\) are dissolved separately in equal volumes of water. Which solution will have higher elevation in boiling point?

3.If the ionic product of \(\text{Ni(OH)}_2\) is \(1.9 \times 10^{-15}\), then the molar solubility of \(\text{Ni(OH)}_2\) in \(1.0\text{ M NaOH}\) is

4.The solubility of \(\text{Pb(OH)}_2\) in water is \(6.7 \times 10^{-6}\text{ M}\). Its solubility in a buffer solution of \(\text{pH} = 8\) would be:

5.A radioactive sample has a half-life of 10 days. The fraction of the initial nuclei decayed after 40 days is:

6.A block of mass $M$ attached to a horizontal spring of spring constant $k$ executes SHM with amplitude $A$. When the block passes through its mean position, a small piece of mass $m$ is dropped vertically onto it and sticks to it. The new amplitude of oscillation is:

Comments

SUBSCRIBE TO OUR NEWS LETTER

1.
If A and B are symmetric matrices of same order such that \(\text{AB} + \text{BA} = \text{X}\) and \(\text{AB} - \text{BA} = \text{Y}\), then \((\text{XY})^\text{T} =\)

2.
\(0.1\text{ m}\) of urea and \(0.05\text{ m}\) of \(\text{CaCl}_2\) are dissolved separately in equal volumes of water. Which solution will have higher elevation in boiling point?

3.
If the ionic product of \(\text{Ni(OH)}_2\) is \(1.9 \times 10^{-15}\), then the molar solubility of \(\text{Ni(OH)}_2\) in \(1.0\text{ M NaOH}\) is

4.
The solubility of \(\text{Pb(OH)}_2\) in water is \(6.7 \times 10^{-6}\text{ M}\). Its solubility in a buffer solution of \(\text{pH} = 8\) would be:

5.
A radioactive sample has a half-life of 10 days. The fraction of the initial nuclei decayed after 40 days is:

6.
A block of mass $M$ attached to a horizontal spring of spring constant $k$ executes SHM with amplitude $A$. When the block passes through its mean position, a small piece of mass $m$ is dropped vertically onto it and sticks to it. The new amplitude of oscillation is: