BITSAT 2026 Iteration 4 counselling seat allotment is expected around July 19, 2026 on the official portal admissions.bits-pilani.ac.in, where eligible students must log in, check their allotment, and accept the seat within the stipulated deadline.

BITS Pilani conducts admissions to its Pilani, Goa, and Hyderabad campuses through a multi-iteration seat allotment process. Iteration 4 is the fourth round of allotment, offering seats vacated in earlier rounds as well as any remaining unfilled seats. Students who registered for BITSAT 2026 counselling and submitted their branch preferences before June 1, 2026 are automatically eligible for Iteration 4 — no fresh registration is needed.

  • Iteration 4 seat allotment is expected around July 19, 2026 — check admissions.bits-pilani.ac.in for the confirmed date.
  • Log in using your BITSAT 2026 Application Number and password — the same credentials used during BITSAT registration.
  • Seats are available across three campuses: Pilani (Rajasthan), Goa, and Hyderabad (Telangana).
  • No category-based reservations apply in BITS Pilani admissions — all seats are allotted purely on merit.
  • Students with awaited Class 12 results must upload their final marksheet by July 10, 2026.
Direct Link to BITSAT 2026 Counselling Registration Portal (ACTIVE)

What is BITSAT 2026 Iteration 4 Counselling?

BITSAT 2026 counselling is an iteration-based seat allotment process run entirely by BITS Pilani on its official portal. Unlike centralised systems such as JoSAA, students register once, submit campus-programme preferences in order of priority, and the system allots seats automatically across successive iterations. Iteration 4 is the fourth such round, offering seats that became available after students declined or forfeited allotments in Iterations 1, 2, and 3.

Students already holding a seat from an earlier iteration may receive an automatic upgrade in Iteration 4 if a higher-ranked preference opens up. Students who did not receive a seat in previous rounds are also considered for available vacancies based on their merit rank derived from BITSAT score and Class 12 PCM marks.


BITSAT 2026 Iteration 4 Important Dates

The table below lists key BITSAT 2026 counselling dates including the expected Iteration 4 schedule. Students must verify exact dates on admissions.bits-pilani.ac.in before taking any action, as the official schedule is subject to revision.

Event Date
Counselling Registration and Preference Submission Opens April 21, 2026
Counselling Registration and Preference Submission Closes June 1, 2026 (11:55 PM IST)
Preference Edit Window June 3 to June 5, 2026
Iteration 1 Seat Allotment June 15, 2026
Iteration 1 Acceptance Deadline June 22, 2026
Class 12 Final Marksheet Submission Deadline July 10, 2026
Iteration 4 Seat Allotment (Expected) Around July 19, 2026

How to Register on BITSAT 2026 Counselling Portal

Students who completed counselling registration before June 1, 2026 do not need to register again for Iteration 4 — log in directly to the portal when allotment results are declared. Students completing registration for the first time should follow the steps below on the official portal.

  1. Visit admissions.bits-pilani.ac.in and click on the Admissions 2026 link for degree programmes.
  2. Enter your BITSAT 2026 Application Number and password set during your BITSAT registration.
  3. Verify your personal details — name, date of birth, registered email, and mobile number.
  4. Pay the non-refundable counselling registration fee of Rs 1,000 via net banking, credit or debit card, or UPI, and download the payment receipt.
  5. Navigate to the Academic Details section and enter your Class 12 subject-wise marks in Physics, Chemistry, and Mathematics (or Biology for B.Pharm.). The portal auto-calculates your aggregate percentage.
  6. Confirm all details and submit the registration form.

How to Fill Branch Preferences for BITSAT 2026

Branch preference filling is a one-time step in BITSAT 2026 counselling. Your submitted preferences determine seat allotment across all iterations including Iteration 4. If you filled preferences before the June 5 edit window closed, no further changes are possible. Students submitting preferences for the first time should follow these steps.

  1. After logging in, go to the Preference Form or Choice Filling section.
  2. Browse all campus-programme combinations available across Pilani, Goa, and Hyderabad campuses.
  3. Rank all combinations in strict order of preference — your most desired programme goes at Position 1 and others follow in descending order of preference.
  4. Add at least 15 to 20 choices to maximise your chances across all iterations, including lower-preference combinations that improve your probability of a seat in later rounds.
  5. Review all entries carefully before submitting.
  6. Lock and submit the preference form before the deadline. Preferences cannot be changed after the edit window (June 3 to June 5, 2026) closes.

Your merit rank is calculated using a weighted formula combining your BITSAT score and Class 12 PCM aggregate. The system automatically allots the highest-ranked available preference for which you are eligible in each iteration.


How to Accept Seat in BITSAT 2026 Iteration 4

When Iteration 4 allotment results are declared around July 19, 2026, log in promptly and accept your seat within the acceptance deadline. Missing the deadline leads to automatic cancellation of the allotted seat.

  1. Log in to admissions.bits-pilani.ac.in with your Application Number and password.
  2. Open the Seat Allotment section to view your Iteration 4 result.
  3. If a seat is allotted, click Accept Seat to confirm your acceptance.
  4. Pay the seat acceptance fee online and save the payment receipt as confirmation.
  5. If you were allotted a seat in an earlier iteration and a higher-preference combination is now available, review the automatic upgrade offer and accept or decline within the deadline.
  6. After the final iteration, report physically to the allotted campus on the specified reporting date with all original documents.

Campus and Programme Options in BITSAT 2026 Counselling

BITS Pilani offers approximately 3,000 seats across three campuses. The table below lists programmes available at each campus under BITSAT 2026 admissions.

Campus B.E. Programmes Other Programmes
BITS Pilani, Pilani (Rajasthan) Chemical, Civil, CSE, EEE, ECE, EI, Manufacturing, Mechanical, Mathematics and Computing M.Sc. in Biological Sciences, Chemistry, Economics, Mathematics, Physics; B.Pharm.
BITS Pilani, Goa Chemical, CSE, ECE, EI, Mechanical M.Sc. in Biological Sciences, Chemistry, Economics, Mathematics, Physics
BITS Pilani, Hyderabad (Telangana) CSE, ECE, EEE, Mechanical, Chemical M.Sc. in Biological Sciences, Chemistry, Economics, Mathematics, Physics; B.Pharm.

There are no category-based reservations in BITS Pilani admissions. All seats are allotted on merit alone. Minimum eligibility requires 75% aggregate in Physics, Chemistry, and Mathematics in Class 12 with at least 60% in each subject individually — no rounding off applies.


Documents Required for BITSAT 2026 Counselling

Keep the following documents ready before accepting your seat in Iteration 4 and for physical reporting to the allotted campus after the final iteration.

Document Copies Required
BITSAT 2026 Admit Card 1 printed copy
BITSAT 2026 Scorecard 1 official printout
Class 12 Marksheet Original and 3 self-attested photocopies
Class 12 Passing or Provisional Certificate Original and 1 photocopy
Class 10 Marksheet and Passing Certificate Original and 1 photocopy
Transfer Certificate from Class 12 school Original
Character or Conduct Certificate (issued within 6 months) Original
Medical Fitness Certificate Original from a registered medical practitioner
Aadhaar Card Original and 1 photocopy
Passport-size Photographs 10 to 12 copies

Students with Class 12 results awaited must upload their final marksheet on the portal by July 10, 2026. Failure to submit the marksheet by this date may result in cancellation of the allotted seat regardless of iteration.


BITSAT 2026 Counselling Iteration 4 FAQs

Ques. When is BITSAT 2026 Iteration 4 seat allotment expected?

Ans. BITSAT 2026 Iteration 4 seat allotment is expected around July 19, 2026. Log in to admissions.bits-pilani.ac.in on the announcement date to check your allotment status and act within the acceptance deadline.

Ques. Do I need to register again for BITSAT 2026 Iteration 4?

Ans. No. If you completed counselling registration and submitted branch preferences before June 1, 2026, you are automatically considered for Iteration 4. Simply log in to the portal when allotment results are declared.

Ques. Can I change my branch preferences before Iteration 4?

Ans. No. The preference edit window closed on June 5, 2026. No changes to branch preferences are allowed after that date. Allotments in all iterations including Iteration 4 are based on your originally submitted preferences.

Ques. Is there any category reservation in BITSAT 2026 counselling?

Ans. No. BITS Pilani does not follow any category-based reservation policy. All seats across Pilani, Goa, and Hyderabad campuses are allotted purely on merit with no relaxations for SC, ST, OBC-NCL, EWS, or any other category.

Ques. What is the minimum Class 12 percentage required for BITSAT 2026 seat acceptance?

Ans. You need a minimum aggregate of 75% in Physics, Chemistry, and Mathematics in Class 12 with at least 60% in each subject individually. No rounding off is allowed — 74.90% does not satisfy the 75% requirement.

Ques. What happens if I miss the Iteration 4 seat acceptance deadline?

Ans. Missing the seat acceptance deadline for Iteration 4 results in automatic cancellation of the allotted seat. You may still be considered in any subsequent iterations if further rounds are conducted and seats remain available.