Is JEE Main mandatory for B.Tech admission at SASTRA University?

No, JEE Main is not mandatory. Candidates without a JEE Main score are automatically considered under Stream 2, which uses Class XII marks only. However, entering a JEE Main score can improve your rank under Stream 1, so it is recommended even for average scorers.

What is the minimum percentage needed for B.Tech admission at SASTRA?

Candidates need a minimum of 60% aggregate in Class XII. Physics and Mathematics are compulsory subjects. One of Chemistry, Biology, Computer Science, or Biotechnology is also required as a subject.

How does SASTRA University calculate the B.Tech merit rank?

Stream 1 merit is calculated as 50% weightage to JEE Main 2026 score and 50% to Class XII aggregate. Class XII marks are normalised by treating the top scorer of each state board as 100% and adjusting all other scores accordingly. Stream 2 rank uses only the normalised Class XII aggregate.

What are the important dates for SASTRA University B.Tech admission 2026?

Applications opened on March 27, 2026 and closed on June 5, 2026. The merit rank list was released around June 14, 2026 and online counselling began on June 15, 2026. The academic session begins on August 1, 2026.

Does SASTRA University offer merit scholarships at the time of B.Tech admission?

Students from J&K and North-Eastern States receive a 100% tuition fee scholarship plus free boarding and lodging at the time of admission. During the programme, the Deans Merit Scholarship offers a 40% fee concession to students in the top 3% of their class and 20% to those in the top 3-10%.

What is the B.Tech fee per semester at SASTRA University?

The B.Tech tuition fee is INR 85,000 per semester in Year 1. A 5% annual increment applies from Year 2 onwards. A one-time admission charge of INR 16,000 is collected at the time of joining. An annual sports and unit test fee of INR 1,000 also applies.

Is direct admission or management quota available at SASTRA University?

No. SASTRA University does not offer a management quota or direct admission route. All seats across all programmes are filled strictly through merit. No donations or capitation fees are accepted at any stage of admission.

Can law aspirants apply to SASTRA University without a CLAT score?

Yes. Candidates without a CLAT score can apply under Phase II. Phase II uses a composite merit of 50% Class XII aggregate. Students with a strong Class XII performance can secure admission even without sitting for CLAT 2026.

What entrance exams are accepted for MBA admission at SASTRA University?

SASTRA University gives preference to candidates with valid scores in CAT, XAT, AIMAT, CMAT, or AIMCAT for MBA admission. Shortlisted candidates then attend a Group Discussion and Personal Interview. A first-class bachelors degree in any discipline is required.

Do GATE-qualified candidates get any benefit for M.Tech at SASTRA University?

Yes. GATE-qualified candidates admitted to M.Tech or M.Sc programmes receive a 50% tuition fee waiver throughout the programme. They also receive a monthly stipend of INR 12,400 as additional financial support.

SASTRA M.Tech Vlsi Design: Fees 2026, Course Duration, Dates, Eligibility

Collegedunia Team

Content Curator | Updated on - Jun 29, 2026

The Master of Technology (M.Tech) in VLSI Design at SASTRA Deemed University, Thanjavur is a unique 2-year full-time postgraduate programme offered under the School of Computing (SOC), Department of Information and Communication Technology (ICT). What makes this programme truly distinctive is its international collaborative structure: the first year (Semesters I and II) is completed at SASTRA's Thanjavur campus, while the second year (Semesters III and IV) is conducted at either ASIA University or Yuan Ze University in Taiwan, with industry visits and internships. The programme covers semiconductor device physics, analog and digital VLSI design, FPGA architecture, ASIC design, nanofabrication, and semiconductor manufacturing. The total fees for the programme are Rs. 2,98,000 (for the India component), with GATE-qualified candidates eligible for a 50% tuition fee waiver and a monthly stipend of Rs. 12,400. This programme is ideal for students seeking a global exposure in the semiconductor and chip design industry.

Admissions for the 2026 batch are currently open on a rolling basis. Applications started from March 27, 2026. GATE-qualified candidates are given preference and receive significant financial benefits. The last date to apply is June 5, 2026.

Key Points

The programme has a unique international structure: Year 1 at SASTRA Thanjavur and Year 2 at ASIA University or Yuan Ze University, Taiwan, with industry visits and internships.
Students gain exposure to semiconductor manufacturing technology, semiconductor packaging, failure analysis, and power devices during their Taiwan stint.
The curriculum covers Analog VLSI, Digital CMOS VLSI, FPGA Architecture, Low Power VLSI, ASIC Design, Device Modeling, and Nanofabrication Techniques.
A summer project is included between Semesters I and II, providing early research exposure.
Elective courses include CAD for VLSI, Mixed Signal VLSI, MEMS and Applications, High Speed Digital Design, and Soft-core Processors.
GATE-qualified candidates receive a 50% tuition fee waiver and a monthly stipend of Rs. 12,400.

194 Views Last Year

43 Studentsshown interest in the last 30 days

Official Link:

Go To Website

Highlights
Fees
Admission
Scholarships
FAQs

SASTRA M.Tech VLSI Design Fees

The M.Tech VLSI Design programme at SASTRA University has a tuition fee of Rs. 70,000 per semester for the India component. The total programme cost including one-time charges at admission is Rs. 2,98,000 for the India portion of the 2-year programme. Note that additional fees may apply for the Taiwan component (accommodation, travel, etc.) which are separate from the SASTRA fee structure. GATE-qualified candidates receive a 50% tuition fee waiver and a monthly stipend of Rs. 12,400.

Fee Components

Fee Component	Amount (Rs.)
Tuition Fee (per semester - India component)	70,000
Tuition Fee (4 semesters total - India component)	2,80,000
Sports and Unit Test Fee (per annum)	1,000
Sports and Unit Test Fee (2 years total)	2,000
Development Fee (one-time, at admission)	10,000
Special Fees / Registration / Medical Exam Fees (one-time, at admission)	6,000
Total Fees - India Component (excluding hostel and Taiwan costs)	2,98,000

GATE-qualified candidates receive a 50% tuition fee waiver (Rs. 35,000/semester) and a monthly stipend of Rs. 12,400.
Additional costs for the Taiwan component (Semesters III and IV) including accommodation, travel, and living expenses are separate and not included above.
Students should contact SASTRA admissions for the complete cost breakdown.
Development fee and Special/Registration/Medical Exam fees are one-time payments made at the time of admission only.
Hostel fees at SASTRA Thanjavur are optional for Year 1.
Hostel lodging charges range from Rs. 16,000 to Rs. 90,000 per year depending on room type.
Educational loans are facilitated through City Union Bank (CUB) and Indian Overseas Bank (IOB) at reduced interest rates.

SASTRA M.Tech VLSI Design Admission 2026

SASTRA University M.Tech VLSI Design 2026 admissions are currently open and being conducted on a rolling basis. Admissions are based on qualifying degree scores, with preference given to GATE-qualified candidates. The application process is entirely online through the SASTRA admissions portal.

College Admission Dates

Event	Date
Application Start Date	March 27, 2026
Application Last Date	June 5, 2026
Mode of Admission	Rolling Admissions (multiple batches)
Admission Based On	Qualifying Degree Scores (GATE preferred)
Batch Commencement	July 2026 (Tentative)

Entrance Exam Dates

Event	Date
GATE 2026 Application Start	August 2025
GATE 2026 Exam Date	February 1-2, 8-9, 15-16, 2026
GATE 2026 Result	March 19, 2026

Note: GATE is not mandatory for M.Tech VLSI Design admission at SASTRA, but GATE-qualified candidates are given preference and receive financial benefits. Admissions are also open to non-GATE candidates based on qualifying degree scores.

The dates mentioned above are tentative and subject to change.

Eligibility Criteria

B.E./B.Tech. degree in ECE, EEE, ICT, CSE, or Electronics Engineering (VLSI Design and Technology) from a recognised university.
M.Sc. in Electronics or related disciplines is also eligible.

Admission Process

Submit online application at webstream.sastra.edu/sastraonline.
Submit GATE score (if applicable) along with qualifying degree marks.
Receive provisional admission letter via email.
Complete fee payment online to confirm admission.
GATE-qualified candidates receive 50% fee waiver and monthly stipend automatically upon joining.
Enrolment and document verification at the time of joining.

SASTRA M.Tech VLSI Design Scholarships 2026

SASTRA University offers merit-based scholarships and government-funded financial support to M.Tech students. The most significant benefit for M.Tech students is the GATE-linked fee waiver and stipend. Additionally, the Dean's Merit Scholarship and government scholarship schemes are available.

Scholarship Details

Scholarship	Eligibility	Amount / Benefit
GATE Fee Waiver + Stipend	Valid GATE score at time of admission	50% tuition fee waiver + Rs. 12,400/month stipend
Dean's Merit Scholarship (Top 3%)	Top 3% of students in university examinations	2/5th (40%) concession on semester tuition fee
Dean's Merit Scholarship (Top 3-10%)	Top 3-10% of students in university examinations	1/5th (20%) concession on semester tuition fee
Hostel Scholarship	Min. 90% class attendance, CGPA 7.5+, no indiscipline	Rs. 16,000 per year (reimburses mess fee)
National Scholarship Portal (NSP)	As per central/state government norms	Varies by scheme

The GATE stipend of Rs. 12,400/month is provided for the duration of the programme to eligible GATE-qualified candidates.
Dean's Merit Scholarship is awarded based on performance in university semester examinations.
Students are encouraged to apply for government scholarships through the National Scholarship Portal (NSP).
Educational loans are available through City Union Bank and Indian Overseas Bank with facilitated processing.

SASTRA M.Tech VLSI Design FAQs

Ques. Is the second year of M.Tech VLSI Design at SASTRA really conducted in Taiwan?

Ans. Yes. The second year (Semesters III and IV) of the M.Tech VLSI Design programme at SASTRA is conducted at either ASIA University or Yuan Ze University in Taiwan. Students attend courses on semiconductor manufacturing, packaging, failure analysis, and power devices, along with industrial internships and industry visits. This gives students a unique international exposure in the global semiconductor ecosystem.

Ques. Is GATE mandatory for M.Tech VLSI Design admission at SASTRA?

Ans. GATE is not mandatory. Admissions are based on qualifying degree scores. However, GATE-qualified candidates are given preference and receive a 50% tuition fee waiver and a monthly stipend of Rs. 12,400.

Ques. What are the additional costs for the Taiwan component of M.Tech VLSI Design?

Ans. The SASTRA fee structure covers the India component (Rs. 2,98,000 total). Additional costs for the Taiwan component including accommodation, travel, and living expenses are separate. Students should contact SASTRA's admissions office directly for the complete cost breakdown for the Taiwan year.

Ques. What career opportunities are available after M.Tech VLSI Design from SASTRA?

Ans. Graduates can pursue careers as VLSI design engineers, chip design engineers, FPGA engineers, verification engineers, and semiconductor process engineers. Key employers include Qualcomm, Intel, Texas Instruments, Broadcom, MediaTek, Samsung Semiconductors, Tata Elxsi, and Wipro VLSI. The international exposure from the Taiwan component significantly enhances employability in global semiconductor companies.

Ques. Which universities in Taiwan are the partner institutions for M.Tech VLSI Design at SASTRA?

Ans. SASTRA has partnerships with ASIA University and Yuan Ze University in Taiwan for the second year of the M.Tech VLSI Design programme. Students can choose either university for their second year, which includes coursework, industrial internship, and industry visits.

Ques. What is the curriculum focus in the first year of M.Tech VLSI Design at SASTRA?

Ans. The first year at SASTRA covers Semiconductor Device Physics, Analog VLSI Design, Digital CMOS VLSI Design, FPGA Architecture, Low Power VLSI, Compound Semiconductors, Nanofabrication Techniques, Digital Design Verification and Testing, ASIC Design, and Device Modeling. Labs include Bluespec Lab, FPGA-based Programmable SoC Lab, and ASIC Design Lab.

Course Finder

Search from 20K+ Courses and 35+ Streams

SASTRA: 1 Answered Question

SASTRA University, Thanjavur: Does your CGPA really matter at the end of your course?

Siddhartha BoseB.Tech Biotechnology, SASTRA University, Thanjavur

Yes, CGPA at SASTRA does matter, especially if you have low CGPA. It will affect your placement and as well as other things. But if you are proficient in programming then you can get into companies like Google without CGPA being a problem. If you have a low GPA, you will miss out on the following things.

ACRS: If you want to finish your course in the 7th semester, you will need a GPA of 7.5+. To get the course you want you will need to have around an 8.5 GPA.
Although most companies set 7.0 GPA requirements. Most dream companies ask for a GPA of 8+.
You won’t be able to go to your graduation ceremony, since SASTRA only invites students with GPAs of 7.5+.

Apart from these above reasons, GPA matters for other reasons too. While hiring, companies look at your GPA, not to evaluate how much you know. Rather they want to how responsible and committed you are.

View All Questions and Answers