Content Curator | Updated on - Mar 30, 2026

The M.Tech in Mechanical Engineering with Specialization in Mechanical System Design (also referred to as Intelligent Mechanical Systems Design in the updated 2026 curriculum) at IIITDM Kancheepuram (Chennai) is a 2-year full-time postgraduate programme offered by the Department of Mechanical Engineering at this centrally funded Institute of National Importance under the Ministry of Education, Government of India. The programme covers advanced topics in machine design, robotics, mechatronics, finite element analysis, product design, manufacturing systems, and intelligent mechanical systems, with a strong emphasis on design-oriented and interdisciplinary learning. The total programme fee is approximately Rs. 2.42 lakh (excluding hostel), with a seat intake of 20 students per batch, and admission is through a valid GATE score (ME paper) via CCMT counselling. The programme is conducted in full-time on-campus mode and is popular among Mechanical Engineering graduates seeking specialised postgraduate education at a premier IIIT with strong research infrastructure and proximity to Chennai's manufacturing and technology ecosystem.

Admission for the 2027 batch is upcoming. Based on the 2026 cycle, CCMT (Centralised Counselling for M.Tech/M.Arch/M.Plan) registration is expected to open tentatively in May 2027, following the declaration of GATE 2027 results (announced March 19, 2027). Candidates are advised to keep their GATE 2027 scorecard ready and register on the CCMT portal once it opens. The institute also conducts a Spot Admission round for seats remaining vacant after CCMT counselling.

Key Points

IIITDM Kancheepuram is one of the 5 centrally funded IIITs under MoE, GoI, established in 2007 with a unique mandate for design and manufacturing-oriented engineering education.
The programme was previously known as M.Tech Mechanical System Design and has been updated to M.Tech Mechanical Engineering with Specialization in Intelligent Mechanical Systems Design in the 2026 curriculum.
The 2026 updated curriculum (MT-ME(IMSD)) is available on the official IIITDM website.
GATE-qualified M.Tech students are eligible for a monthly stipend of Rs. 12,400 from MoE/AICTE for up to 24 months, subject to satisfactory academic performance.
Hostel accommodation is compulsory for all M.Tech students unless an exemption is granted by the institute.
The programme offers strong research opportunities with access to well-equipped Mechanical Engineering labs and faculty with PhD credentials from IITs and NITs.
The institute also offers M.Tech in Mechanical Engineering with Specialization in Smart Manufacturing as a parallel programme in the same department.

Official Link:

Go To Website

Highlights
Fees
Admission
Scholarships
Placements
Cutoff
Ranking
FAQs

IIITDM Kancheepuram Latest Updates and News

01 Apr, 2026 CCMT 2026 Counselling is expected to begin in May 2026 for admission to MTech/ MArch/ MPlan courses at NITs and CFTIs.

IIITDM Chennai M.Tech MSD Fees

The total programme fee for M.Tech (Mechanical System Design) at IIITDM Kancheepuram for the 2026-27 batch is approximately Rs. 2.42 lakh for the full 2-year programme (4 semesters), excluding hostel charges. The tuition fee is Rs. 50,000 per semester in the first year and Rs. 60,000 per semester in the second year. SC/ST students are fully exempted from tuition fee payment irrespective of parental income. Hostel accommodation is compulsory and adds approximately Rs. 1.89 lakh over 4 semesters to the total cost.

Fee Structure

Fee Component	Per Semester (Year 1)	Per Semester (Year 2)	Total (4 Semesters)
Tuition Fee	Rs. 50,000	Rs. 60,000	Rs. 2,20,000
Examination Fee	Rs. 500	Rs. 500	Rs. 2,000
Registration Fee	Rs. 500	Rs. 500	Rs. 2,000
Sports Fee	Rs. 1,000	Rs. 1,000	Rs. 4,000
Medical Fee	Rs. 1,000	Rs. 1,000	Rs. 4,000
Student Amenities	Rs. 2,000	Rs. 2,000	Rs. 8,000
Medical Insurance (per annum)	Rs. 600 (Sem 1 only)	Rs. 600 (Sem 3 only)	Rs. 1,200
One-Time Fees (Admission, Certificate, Alumni, Library, Cultural, Infrastructure, Student Welfare)	Rs. 5,000 (Sem 1 only)	-	Rs. 5,000
Total Institute Fees	Rs. 60,600 (Sem 1)	Rs. 55,600 (Sem 2 and 3), Rs. 55,600 (Sem 4)	Rs. 2,42,000
Hostel Fees (Seat Rent + Maintenance + Establishment + Development)	Rs. 21,700	Rs. 21,700	Rs. 86,800
Dining Charges (Advance, per semester)	Rs. 25,050	Rs. 25,050	Rs. 1,00,200
Hostel Admission Fee (one-time)	Rs. 700 (Sem 1 only)	-	Rs. 700
Total Hostel Fees	Rs. 47,450 (Sem 1)	Rs. 46,750 (Sem 2-4)	Rs. 1,88,700
Total Fees (Institute + Hostel)			Rs. 4,30,700

SC/ST students are fully exempted from tuition fee payment irrespective of parental income.
Hostel is compulsory for all M.Tech students. Day scholars (if exemption granted) pay only institute fees.
Dining charges may vary based on tendering value.
No EMI or instalment options are officially mentioned; fees are payable semester-wise.
The one-time fees (Rs. 5,000) are collected only in the first semester.
Total Institute Fees (without hostel) for the full programme: approximately Rs. 2,42,000.

IIITDM Chennai M.Tech MSD Admission 2027

Admission to M.Tech (Mechanical System Design) at IIITDM Kancheepuram is through CCMT (Centralised Counselling for M.Tech/M.Arch/M.Plan) based on a valid GATE score in the ME (Mechanical Engineering) paper. The 2026 CCMT cycle has concluded; the 2027 cycle is expected to follow a similar timeline. GATE 2027 results were declared on March 19, 2027, and CCMT 2027 registration is expected to open tentatively in May 2027. Candidates must register on the CCMT portal, fill choices, and participate in seat allotment rounds. The institute also conducts a Spot Admission round for seats remaining vacant after CCMT, where both GATE-qualified and non-GATE-qualified candidates may be eligible to apply.

College Admission Dates

Event	Date (2026 Actual / 2027 Tentative)
GATE 2027 Result Declaration	March 19, 2027 (Actual)
CCMT 2027 Registration Opens (Tentative)	Mid-May 2027
CCMT 2027 Last Date for Registration and Fee Payment (Tentative)	Early June 2027
CCMT 2027 Last Date for Choice Filling and Locking (Tentative)	Early June 2027
CCMT 2027 Round 1 Seat Allotment (Tentative)	Mid-June 2027
CCMT 2027 Round 2 Seat Allotment (Tentative)	Late June 2027
CCMT 2027 Round 3 Seat Allotment (Tentative)	Late June 2027
CCMT 2027 Special Round Registration (Tentative)	Mid-July 2027
CCMT 2027 National Spot Round (Tentative)	Early August 2027
Physical Reporting at IIITDM Kancheepuram (Tentative)	August 2027
IIITDM Spot Admission Round (if seats vacant)	July-August 2027 (Tentative)

Entrance Exam Dates

Event	Date
GATE 2027 Application Start	August 28, 2026
GATE 2027 Application End	October 13, 2026
GATE 2027 Admit Card Release	January 13, 2027
GATE 2027 Exam Dates	February 7, 8, 14, 15, 2027
GATE 2027 Answer Key Release	February 19, 2027
GATE 2027 Result Declaration	March 19, 2027

The dates mentioned above are tentative and subject to change.

Eligibility Criteria

Candidates must hold a B.E./B.Tech degree in Mechanical Engineering, Aerospace Engineering, Production Engineering, Industrial Engineering, or a related discipline from a recognised university/institute.
Minimum 60% aggregate marks or 6.0 CGPA (55% or 5.5 CGPA for SC/ST/PwD candidates) in the qualifying degree.
A valid GATE score in the ME (Mechanical Engineering) paper is required for admission through CCMT; for Spot Admission, both GATE-qualified and non-GATE-qualified candidates may be eligible.

Admission Process

Appear in GATE (ME paper) and obtain a valid GATE score.
Register on the CCMT portal (ccmt.admissions.nic.in) during the registration window.
Pay the CCMT registration and participation fee online.
Fill and lock choices of institutes and programmes on the CCMT portal.
Participate in seat allotment rounds (Round 1, Round 2, Round 3, Special Rounds, National Spot Round).
Upon seat allotment, pay the Seat Acceptance Fee (SAF) and upload documents online.
Complete online document verification by the allotted institute.
Pay the Partial Admission Fee (PAF) to confirm the seat.
Report physically to IIITDM Kancheepuram as per the schedule and pay the balance fee.
Alternatively, apply for the institute's Spot Admission round if seats remain vacant after CCMT.

IIITDM Kancheepuram: Students' Opinion

AI-Generated Summary based on 1 Reviews

The GATE 2019 exam score required for admission to the program is 54%. Postgraduate students are admitted through the GATE exam and receive a monthly stipend of 12,400, which nearly covers their living expenses. While the main fees remain stable, any increase is typically due to changes in the mess contractor fees.

Placement opportunities differ by field, with computer and electronics students enjoying a wealth of opportunities, whereas mechanical students face limited prospects. Overall, around 50% of students secure job placements. Internships, particularly for mechanical students, are not plentiful but can be obtained with support from faculty.

By Collegedunia’s Personal AI

IIITDM Chennai M.Tech MSD Scholarships 2027

M.Tech students at IIITDM Kancheepuram are primarily supported through the GATE-based MoE stipend and tuition fee waivers for reserved category students. The GATE stipend of Rs. 12,400 per month is a significant financial benefit that effectively offsets a large portion of the programme cost for eligible students. SC/ST students additionally benefit from a full tuition fee waiver, making the programme highly affordable for them.

Scholarship Details

Scholarship / Financial Benefit	Amount	Eligibility	Duration
MoE/AICTE GATE Stipend	Rs. 12,400 per month	M.Tech students admitted through GATE with valid GATE score	Up to 24 months (subject to satisfactory academic performance)
SC/ST Tuition Fee Waiver	Full tuition fee exemption (Rs. 2,20,000 over 4 semesters)	SC/ST students, irrespective of parental income	Entire programme duration
PwD Tuition Fee Waiver	Full tuition fee exemption	PwD students	Entire programme duration

The GATE stipend is funded by MoE/AICTE and is subject to the student maintaining satisfactory academic progress as per institute norms.
Students who are sponsored by their employer or are part-time students may not be eligible for the GATE stipend.
SC/ST and PwD fee waivers apply only to tuition fee; other charges (examination fee, hostel, etc.) are payable as applicable.
There is no separate institute-level merit scholarship specifically for M.Tech students beyond the above benefits.

IIITDM Chennai M.Tech MSD Placement 2026-27

M.Tech Mechanical Engineering placements at IIITDM Kancheepuram are modest in scale given the small batch sizes. In the 2026-27 placement cycle, M.Tech MECH (ESD/MSD) recorded 2 registered eligible students with 1 offer (50% placement rate) and a maximum CTC of Rs. 6 LPA, while M.Tech MECH (SM) also recorded 2 registered eligible students with 1 offer (50% placement rate) and a maximum CTC of Rs. 15 LPA. Overall, M.Tech programmes at IIITDM Kancheepuram recorded an average CTC of Rs. 10.20 LPA across all specialisations in 2026-27. Many M.Tech Mechanical students opt for higher studies (PhD at IITs, NITs, or abroad) or off-campus placements, which are not reflected in official statistics. Core mechanical companies and design firms from Chennai's industrial belt do recruit from this programme.

Placement Statistics

Placement Metric	M.Tech MECH (MSD/ESD) - 2026-27	M.Tech MECH (SM) - 2026-27
Registered Eligible Students	2	2
Number of Offers	1	1
Offer Percentage	50%	50%
Maximum CTC	Rs. 6.00 LPA	Rs. 15.00 LPA
Average CTC (All M.Tech)	Rs. 10.20 LPA	Rs. 10.20 LPA

IIITDM Kancheepuram M.Tech Mechanical System Design Ranking

Collegedunia Ranking

#80 out of 500 in India 2025

#3rd in Chennai

#6 in Tamil Nadu

NIRF Ranking

#200 out of 300 in India 2025

#9th in Chennai

#15 in Tamil Nadu

IIRF Ranking

#36 out of 160 in Top Public Colleges in India 2025

#3rd in Chennai

#4 in Tamil Nadu

Do you think the Rankings are wrong ? Report Here

IIITDM Chennai M.Tech MSD FAQs

Ques. What is the difference between M.Tech Mechanical System Design and M.Tech Smart Manufacturing at IIITDM Kancheepuram?

Ans. M.Tech Mechanical System Design (now called Intelligent Mechanical Systems Design) focuses on machine design, robotics, mechatronics, product design, and intelligent systems. M.Tech Smart Manufacturing focuses on advanced manufacturing processes, Industry 4.0, automation, and production systems. Both are offered by the Department of Mechanical Engineering with 20 seats each. Your choice should depend on whether your interest lies in design and systems or in manufacturing and production.

Ques. Which GATE paper should I appear in for M.Tech Mechanical System Design at IIITDM Kancheepuram?

Ans. You must appear in the ME (Mechanical Engineering) GATE paper. Candidates with a valid GATE score in ME are eligible to apply for M.Tech Mechanical Engineering (Mechanical System Design / Intelligent Mechanical Systems Design) through CCMT.

Ques. What is the GATE cutoff for M.Tech Mechanical System Design at IIITDM Kancheepuram?

Ans. The GATE cutoff varies each year. For 2026, the GATE score cutoff for M.Tech Mechanical System Design at IIITDM Kancheepuram was approximately 442 marks (General category, Round 1). Candidates are advised to check the official CCMT portal for the latest cutoff data.

Ques. Can I apply for M.Tech Mechanical System Design at IIITDM Kancheepuram without a GATE score?

Ans. Admission through CCMT requires a valid GATE score. However, the institute conducts a Spot Admission round after CCMT for seats remaining vacant, where both GATE-qualified and non-GATE-qualified candidates may be eligible to apply. Candidates without a GATE score can explore the Spot Admission route by checking the official IIITDM admissions page.

Ques. How are placements for M.Tech Mechanical Engineering at IIITDM Kancheepuram?

Ans. Placements for M.Tech Mechanical Engineering at IIITDM Kancheepuram are limited due to the small batch size. In 2026-27, the placement rate was 50% with a maximum CTC of Rs. 6 LPA for the MSD specialisation. Many students opt for higher studies (PhD at IITs or abroad) or secure off-campus placements independently. Core mechanical and design companies from Chennai's industrial ecosystem do recruit from this programme.

Ques. Is the M.Tech Mechanical System Design curriculum at IIITDM Kancheepuram updated and industry-relevant?

Ans. Yes, the curriculum has been updated in 2026 and is now titled Intelligent Mechanical Systems Design, reflecting the growing importance of robotics, mechatronics, and intelligent systems in modern mechanical engineering. The curriculum is available on the official IIITDM website (MT-ME(IMSD) 2026). The institute's design-oriented approach ensures students get hands-on exposure to design tools, simulation software, and lab-based projects alongside theoretical coursework.

Important Updates

Course Finder

Search from 20K+ Courses and 35+ Streams

Why To Join IIITDM Kancheepuram - Reviews & Rating

4.0

(1 Verified Review)

Write a College Review

& Win Monthly Prizes Up to ₹1 Lakh/-*

5(47%)

4(44%)

3(7%)

2(1%)

1(1%)

Academic

4.1

Faculty

4.0

Infrastructure

4.3

Accommodation

4.1

Social Life

4.3

Placement

3.6

Reset All Filter

Harsha

4.1Helpful

M.Tech, Mechanical System Design

Reviewed on Jun 1, 2021(Enrolled 2019)

Glimpse of IIIT D&M Kancheepuram

Fee Structure And Facilities:

For PG the entrance is through gate so HTTA of 12400 will be given every month and it almost covers the whole fees of your stay there. Fee hike depends on mess contractor as they adjust the fees everything else remains fixed

Report

Do you think the data is wrong ? Report Here