![Visvesvaraya National Institute of Technology - [VNIT]](public/college_data/images/logos/1692850103VNITlogo.jpeg)
VNIT Nagpur GATE Cutoff 2026 will be released during the official seat allotment and counselling process. Candidates seeking admission must meet the minimum score requirements determined by the institute. Based on the 2025 GATE Cutoff data, the highest closing score was 602 for M.Tech (Computer Science and Engineering), while M.Tech (Excavation Engineering) closed at 351 for the General category.
Aspirants can check the previous year's cutoff trends, expected 2026 ranges, and category-wise closing scores (General, OBC, SC, ST, EWS) in the tables below to estimate their admission chances.
VNIT Nagpur Cutoff: Key Highlights
- Top Specialization: M.Tech (Computer Science and Engineering) (Closing Score: 602).
- Lowest Cutoff Branch: M.Tech (Excavation Engineering) (Closing Score: 351).
- Selection Process: Valid entrance score followed by centralized counselling.
- Expected Trend: High demand is projected for core branches in the 2026 admission cycle.
VNIT Nagpur GATE Cutoff 2025: Category-wise
Candidates can refer to the 2025 category-wise closing scores to understand the exact requirements for admissions at VNIT Nagpur.
VNIT Nagpur GATE Cutoff 2025 for General Category
For the General category, M.Tech (CAD/ CAM) recorded the highest cutoff at 352. Detailed course-wise scores are listed below:
| Specialization | Closing Score |
|---|---|
| M.Tech (CAD/ CAM) | 352 |
| M.Tech (Chemical Engineering) | 363 |
| M.Tech (Communication Systems) | 377 |
| M.Tech (Computer Science and Engineering) | 602 |
| M.Tech (Construction Technology) | 400 |
| M.Tech (Environmental Engineering) | 354 |
| M.Tech (Excavation Engineering) | 351 |
| M.Tech (Geoinformatics) | 371 |
| M.Tech (Geotechnical Engineering) | 351 |
| M.Tech (Heat Power) | 352 |
| M.Tech (Material Engineering) | 366 |
| M.Tech (Power and Energy System Engineering) | 354 |
| M.Tech (Power Electronics and Drives) | 367 |
| M.Tech (Production & Industrial Engineering) | 355 |
| M.Tech (Structural Dynamics & Earthquake Engineering) | 382 |
| M.Tech (Structural Engineering) | 382 |
| M.Tech (Transportation Engineering) | 352 |
| M.Tech (VLSI Design) | 444 |
| M.Tech (Water Resources Engineering) | 355 |
| M.Tech. (Urban Planning) | 367 |
VNIT Nagpur GATE Cutoff 2025 for EWS Category
For the EWS category, M.Tech (CAD/ CAM) recorded the highest cutoff at 342. Detailed course-wise scores are listed below:
| Specialization | Closing Score |
|---|---|
| M.Tech (CAD/ CAM) | 342 |
| M.Tech (Communication Systems) | 323 |
| M.Tech (Computer Science and Engineering) | 579 |
| M.Tech (Construction Technology) | 359 |
| M.Tech (Environmental Engineering) | 332 |
| M.Tech (Geoinformatics) | 304 |
| M.Tech (Power and Energy System Engineering) | 316 |
| M.Tech (Power Electronics and Drives) | 358 |
| M.Tech (Production & Industrial Engineering) | 316 |
| M.Tech (Structural Dynamics & Earthquake Engineering) | 336 |
| M.Tech (Structural Engineering) | 348 |
| M.Tech (VLSI Design) | 405 |
| M.Tech (Water Resources Engineering) | 317 |
| M.Tech. (Urban Planning) | 305 |
VNIT Nagpur GATE Cutoff 2025 for OBC Category
For the OBC category, M.Tech (CAD/ CAM) recorded the highest cutoff at 324. Detailed course-wise scores are listed below:
| Specialization | Closing Score |
|---|---|
| M.Tech (CAD/ CAM) | 324 |
| M.Tech (Chemical Engineering) | 303 |
| M.Tech (Communication Systems) | 340 |
| M.Tech (Computer Science and Engineering) | 572 |
| M.Tech (Construction Technology) | 355 |
| M.Tech (Environmental Engineering) | 322 |
| M.Tech (Excavation Engineering) | 317 |
| M.Tech (Geoinformatics) | 304 |
| M.Tech (Geotechnical Engineering) | 321 |
| M.Tech (Heat Power) | 321 |
| M.Tech (Power and Energy System Engineering) | 326 |
| M.Tech (Power Electronics and Drives) | 342 |
| M.Tech (Production & Industrial Engineering) | 314 |
| M.Tech (Structural Dynamics & Earthquake Engineering) | 332 |
| M.Tech (Structural Engineering) | 359 |
| M.Tech (Transportation Engineering) | 321 |
| M.Tech (VLSI Design) | 416 |
| M.Tech (Water Resources Engineering) | 337 |
| M.Tech. (Urban Planning) | 282 |
VNIT Nagpur GATE Cutoff 2025 for SC Category
For the SC category, M.Tech (CAD/ CAM) recorded the highest cutoff at 241. Detailed course-wise scores are listed below:
| Specialization | Closing Score |
|---|---|
| M.Tech (CAD/ CAM) | 241 |
| M.Tech (Chemical Engineering) | 168 |
| M.Tech (Communication Systems) | 268 |
| M.Tech (Computer Science and Engineering) | 443 |
| M.Tech (Construction Technology) | 321 |
| M.Tech (Environmental Engineering) | 283 |
| M.Tech (Excavation Engineering) | 262 |
| M.Tech (Geoinformatics) | 260 |
| M.Tech (Geotechnical Engineering) | 245 |
| M.Tech (Heat Power) | 232 |
| M.Tech (Power and Energy System Engineering) | 283 |
| M.Tech (Power Electronics and Drives) | 295 |
| M.Tech (Production & Industrial Engineering) | 206 |
| M.Tech (Structural Dynamics & Earthquake Engineering) | 272 |
| M.Tech (Structural Engineering) | 306 |
| M.Tech (Transportation Engineering) | 262 |
| M.Tech (VLSI Design) | 327 |
| M.Tech (Water Resources Engineering) | 260 |
| M.Tech. (Urban Planning) | 271 |
VNIT Nagpur GATE Cutoff 2025 for ST Category
For the ST category, M.Tech (CAD/ CAM) recorded the highest cutoff at 238. Detailed course-wise scores are listed below:
| Specialization | Closing Score |
|---|---|
| M.Tech (CAD/ CAM) | 238 |
| M.Tech (Communication Systems) | 226 |
| M.Tech (Computer Science and Engineering) | 343 |
| M.Tech (Construction Technology) | 247 |
| M.Tech (Environmental Engineering) | 283 |
| M.Tech (Excavation Engineering) | 243 |
| M.Tech (Geoinformatics) | 278 |
| M.Tech (Geotechnical Engineering) | 250 |
| M.Tech (Power and Energy System Engineering) | 266 |
| M.Tech (Power Electronics and Drives) | 292 |
| M.Tech (Structural Dynamics & Earthquake Engineering) | 245 |
| M.Tech (Structural Engineering) | 268 |
| M.Tech (Transportation Engineering) | 256 |
| M.Tech (VLSI Design) | 268 |
| M.Tech (Water Resources Engineering) | 264 |
| M.Tech. (Urban Planning) | 122 |
VNIT Nagpur GATE Cutoff Comparison: 2024 vs 2025
Checking the past year trends helps candidates understand if competition is increasing or decreasing. The table below compares the General category closing scores for the last two years.
| Specialization | 2024 Score | 2025 Score | Trend |
|---|---|---|---|
| M.Tech (Computer Science and Engineering) | 560 | 602 | Increased |
| M.Tech (VLSI Design) | 405 | 444 | Increased |
| M.Tech (Construction Technology) | 446 | 400 | Decreased |
| M.Tech (Structural Engineering) | 451 | 382 | Decreased |
| M.Tech (Structural Dynamics & Earthquake Engineering) | 405 | 382 | Decreased |
| M.Tech (Communication Systems) | 375 | 377 | Stable |
| M.Tech (Geoinformatics) | 377 | 371 | Decreased |
| M.Tech (Power Electronics and Drives) | 354 | 367 | Increased |
| M.Tech. (Urban Planning) | 353 | 367 | Increased |
| M.Tech (Chemical Engineering) | 356 | 363 | Increased |
| M.Tech (Production & Industrial Engineering) | 351 | 355 | Stable |
| M.Tech (Water Resources Engineering) | 352 | 355 | Stable |
| M.Tech (Environmental Engineering) | 351 | 354 | Stable |
VNIT Nagpur Expected GATE Cutoff 2026
Based on previous admission data, candidates can expect the 2026 cutoffs to fall within the ranges mentioned below. Scoring above this range ensures a higher chance of seat allotment.
| Specialization | Expected 2026 Score Range |
|---|---|
| M.Tech (Computer Science and Engineering) | 584 - 614 |
| M.Tech (VLSI Design) | 426 - 456 |
| M.Tech (Construction Technology) | 382 - 412 |
| M.Tech (Structural Engineering) | 364 - 394 |
| M.Tech (Structural Dynamics & Earthquake Engineering) | 364 - 394 |
| M.Tech (Communication Systems) | 359 - 389 |
| M.Tech (Geoinformatics) | 353 - 383 |
| M.Tech (Power Electronics and Drives) | 349 - 379 |
| M.Tech. (Urban Planning) | 349 - 379 |
| M.Tech (Material Engineering) | 348 - 378 |
| M.Tech (Chemical Engineering) | 345 - 375 |
| M.Tech (Production & Industrial Engineering) | 337 - 367 |
| M.Tech (Water Resources Engineering) | 337 - 367 |
| M.Tech (Environmental Engineering) | 336 - 366 |
| M.Tech (Power and Energy System Engineering) | 336 - 366 |
VNIT Nagpur Counselling Process
Candidates who meet the cutoff must participate in the official counselling process. The steps include:
- Registration: Register on the centralized portal using your credentials.
- Choice Filling: Select VNIT Nagpur and preferred specializations based on your score.
- Seat Allotment: Seats are allocated in multiple rounds based on rank, category, and availability.
- Document Verification: After allotment, candidates must pay the acceptance fee and complete document verification.
VNIT Nagpur vs Other Institutes: GATE Cutoff Comparison
Candidates targeting M.Tech (Computer Science and Engineering) can compare the closing scores of VNIT Nagpur with other top institutes below:
| Institute Name | Specialization | Closing Score (General) |
| **VNIT Nagpur** | M.Tech (Computer Science and Engineering) | **602** |
| IIT Dharwad | M.Tech (Computer Science and Engineering) | 600 |
| IIT Bhilai | M.Tech (Computer Science and Engineering) | 614 |
| NIT Jamshedpur | M.Tech (Computer Science and Engineering) | 589 |
| NIT Delhi | M.Tech (Computer Science and Engineering) | 621 |
Frequently Asked Questions (FAQs)
Ques. What is the GATE cutoff for M.Tech (Computer Science and Engineering) at VNIT Nagpur?
Ans. In the latest admission round, the closing score for M.Tech (Computer Science and Engineering) at VNIT Nagpur was 602 for General category candidates.
Ques. Which branch has the lowest GATE cutoff at VNIT Nagpur?
Ans. Based on the latest data, **M.Tech (Excavation Engineering)** recorded the lowest closing score of 351.
Ques. What is a safe score for VNIT Nagpur in 2026?
Ans. Candidates should target a score between 351 and 602 depending on their category and chosen specialization.
Ques. Is an entrance exam score compulsory for admission at VNIT Nagpur?
Ans. Yes, a valid entrance exam score is mandatory for admission to the regular programs.
.png?h=132&w=263&mode=stretch)
.png?h=132&w=263&mode=stretch)
.png?h=132&w=263&mode=stretch)
.png?h=132&w=263&mode=stretch)
.png?h=78&w=78&mode=stretch)
.png?h=72&w=72&mode=stretch)
.png?h=72&w=72&mode=stretch)
.png?h=72&w=72&mode=stretch)
Comments