![Dnyanshree Institute of Engineering & Technology - [DIET]](https://image-static.collegedunia.com/public/college_data/images/logos/1476959800Untitled.png?h=71.7&w=71.7&mode=stretch)
The Official MHT-CET Cutoff 2025 for Dnyanshree Institute of Engineering & Technology Satara has not been released yet. However, students can refer to the expected MHT-CET 2025 cutoff for Dnyanshree Institute of Engineering & Technology Satara, which is based on the trends observed in previous years cutoff.
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 (Category Wise)
Dnyanshree Institute of Engineering & Technology Satara MHT-CET 2025 Expected Cutoff for GOPENH Category ranges between 0.45 - 74.2. For Round 1, Dnyanshree Institute of Engineering & Technology Satara MHT-CET 2025 is expected to be 0.45-74.2.
| Category | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| GOPENH | 0.45-74.2 | 0.45-74.2 |
| GOPENO | 0.94-64.88 | 0.94-64.88 |
| GSEBCH | 3.25-62.9 | 3.25-62.9 |
| LOBCH | 7.13-64.39 | 2.51-64.39 |
| LOPENH | 4.33-77.84 | 2.95-77.84 |
| LOPENO | 5.23-85.54 | 3.39-85.54 |
| LSEBCH | 13.43-72.12 | 11.7-72.12 |
| TFWS | 26.78-85.95 | 26.78-85.95 |
| AI | 4.71-31.32 | 4.71-39.16 |
| GOBCH | 7.5-55.25 | 5.75-62.08 |
| GOBCO | 1.03-44.98 | 1.03-57.4 |
| LSEBCO | 9.21-59.98 | 9.21-62.9 |
| GNT2H | 1.51-71.64 | 1.31-71.64 |
| GSCH | 1.6-57.33 | 1.6-57.33 |
| GSEBCO | 9.69-35.16 | 7.61-51.7 |
| LOBCO | 6.35-58.08 | 6.35-65.36 |
| EWS | 1.63-79.47 | 1.63-82.23 |
| GNT1H | 1.75-72.88 | 1.75-72.88 |
| LNT2H | 15.44-52.24 | 15.44-59.92 |
| LSCH | 1.22-59.06 | 1.22-59.06 |
| DEFOBCS | 11.59-11.59 | 11.48-63.54 |
| DEFOPENS | 29.24-71.23 | 29.24-71.23 |
| GNT2O | 12.7-53.82 | 12.7-53.82 |
| GSCO | 4.74-40.25 | 4.74-46.32 |
| LNT1O | 75.4-75.4 | 75.4-75.4 |
| LNT3H | 7.24-7.24 | 7.24-68.12 |
| ORPHAN | 46.76-46.76 | 32.56-60.13 |
| PWDOPENH | - | 13.27-68.12 |
| PWDOBCH | - | 1.03-58.22 |
| GSTH | 39.91-39.91 | 16.86-60.5 |
| GSTO | - | 11.72-45.23 |
| GVJH | 46.06-60.73 | 27.21-60.73 |
| LSCO | 6.57-48.77 | 6.57-48.77 |
| LSTH | - | 43.47-61.64 |
| GNT3O | - | 25.21-25.21 |
| LVJO | 24.54-24.54 | 24.54-33.47 |
| DEFSCS | - | 14.05-40.04 |
| GVJO | 62.37-62.37 | 33.08-62.37 |
| LNT3O | 25.65-25.65 | 25.65-50.6 |
| LSTO | - | 24.59-42.74 |
| PWDSCH | - | 13.66-47.36 |
| GNT3H | 28.6-28.6 | 11.12-47.98 |
| LNT1H | 24.54-29.31 | 24.54-29.31 |
| LVJH | 52.75-52.75 | 24.54-52.75 |
| GNT1O | 59.92-59.92 | 59.92-59.92 |
| DEFROBCS | 15.21-15.21 | 10.46-15.21 |
Also Check:
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 (Course Wise)
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GOPENH Category
BE Computer Science and Engineering Cutoff for MHT-CET (GOPENH Category) expected to fall in the range between 54.15-74.2, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GOPENH Category with expected range of 20.41-66.81. You can check course wise expected MHT-CET 2025 cutoff for GOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 64.39-74.2 | 54.15-74.2 |
| BE Electronics & Telecom Engineering | 49.05-58.16 | 20.41-66.81 |
| BE Additive Manufacturing | 43.74-43.74 | 16.86-43.74 |
| BE Mechanical Engineering | 12.21-29.24 | 11.44-29.24 |
| BE Electrical and Computer Engineering | 33.47-33.47 | 9.34-70.75 |
| BE Electrical Engineering | 3.98-54.18 | 3.98-54.18 |
| BE Civil Engineering | 0.45-40.16 | 0.45-69.71 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GOPENO Category
BE Civil Engineering Cutoff for MHT-CET (GOPENO Category) expected to fall in the range between 35.68-35.68, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Additive Manufacturing is expected to be the second most preferred course for GOPENO Category with expected range of 22.82-49.6. You can check course wise expected MHT-CET 2025 cutoff for GOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Civil Engineering | 35.68-35.68 | 35.68-35.68 |
| BE Additive Manufacturing | 22.82-22.82 | 22.82-49.6 |
| BE Computer Science and Engineering | 43.08-64.88 | 11.13-64.88 |
| BE Electrical Engineering | 7.1-26.31 | 7.1-60.5 |
| BE Mechanical Engineering | 4.02-15.54 | 4.02-15.54 |
| BE Electrical and Computer Engineering | 22.03-22.03 | 1.86-57.62 |
| BE Electronics & Telecom Engineering | 0.94-38.79 | 0.94-47.77 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GSEBCH Category
BE Computer Science and Engineering Cutoff for MHT-CET (GSEBCH Category) expected to fall in the range between 50.49-62.9, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSEBCH Category with expected range of 47.46-54.09. You can check course wise expected MHT-CET 2025 cutoff for GSEBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 58.9-62.9 | 50.49-62.9 |
| BE Electronics & Telecom Engineering | 52.03-54.09 | 47.46-54.09 |
| BE Electrical and Computer Engineering | 31.56-31.56 | 16.86-31.56 |
| BE Electrical Engineering | 27.15-27.15 | 8.85-27.15 |
| BE Additive Manufacturing | 32.13-32.13 | 5.99-32.13 |
| BE Civil Engineering | 3.25-18.65 | 3.25-18.65 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LOBCH Category
BE Computer Science and Engineering Cutoff for MHT-CET (LOBCH Category) expected to fall in the range between 45.17-64.39, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LOBCH Category with expected range of 29.41-40.09. You can check course wise expected MHT-CET 2025 cutoff for LOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 45.17-64.39 | 45.17-64.39 |
| BE Electronics & Telecom Engineering | 29.41-40.09 | 29.41-40.09 |
| BE Electrical and Computer Engineering | 15.82-15.82 | 15.82-15.82 |
| BE Electrical Engineering | 17.6-17.6 | 9.85-17.6 |
| BE Civil Engineering | 7.13-7.13 | 7.13-7.13 |
| BE Additive Manufacturing | 16.86-16.86 | 2.51-16.86 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LOPENH Category
BE Computer Science and Engineering Cutoff for MHT-CET (LOPENH Category) expected to fall in the range between 55.02-77.84, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LOPENH Category with expected range of 32.34-64.26. You can check course wise expected MHT-CET 2025 cutoff for LOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 67.15-77.84 | 55.02-77.84 |
| BE Electronics & Telecom Engineering | 44.52-64.26 | 32.34-64.26 |
| BE Electrical and Computer Engineering | 36.08-36.08 | 9.43-36.08 |
| BE Electrical Engineering | 20.36-47.63 | 3.98-56.56 |
| BE Additive Manufacturing | 21.3-21.3 | 3.2-21.3 |
| BE Mechanical Engineering | 7.44-14.51 | 3.12-14.51 |
| BE Civil Engineering | 4.33-51.79 | 2.95-72.89 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LOPENO Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LOPENO Category) expected to fall in the range between 30.33-76.03, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for LOPENO Category with expected range of 19.49-85.54. You can check course wise expected MHT-CET 2025 cutoff for LOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 47.89-75.21 | 30.33-76.03 |
| BE Computer Science and Engineering | 19.49-85.54 | 19.49-85.54 |
| BE Mechanical Engineering | 17.6-17.6 | 17.6-17.6 |
| BE Additive Manufacturing | 21.54-21.54 | 11.71-21.54 |
| BE Civil Engineering | 8.92-53.82 | 8.92-53.82 |
| BE Electrical Engineering | 5.23-38.88 | 5.23-38.88 |
| BE Electrical and Computer Engineering | 28.2-28.2 | 3.39-36.08 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LSEBCH Category
BE Computer Science and Engineering Cutoff for MHT-CET (LSEBCH Category) expected to fall in the range between 64.71-72.12, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LSEBCH Category with expected range of 56.01-59.98. You can check course wise expected MHT-CET 2025 cutoff for LSEBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 64.71-72.12 | 64.71-72.12 |
| BE Electronics & Telecom Engineering | 56.84-59.98 | 56.01-59.98 |
| BE Electrical Engineering | 38.03-38.03 | 38.03-38.03 |
| BE Civil Engineering | 35.78-35.78 | 32.17-35.78 |
| BE Electrical and Computer Engineering | 36.08-36.08 | 11.71-36.08 |
| BE Additive Manufacturing | 13.43-13.43 | 11.7-13.43 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for TFWS Category
BE Additive Manufacturing Cutoff for MHT-CET (TFWS Category) expected to fall in the range between 74.06-74.06, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for TFWS Category with expected range of 69.63-85.95. You can check course wise expected MHT-CET 2025 cutoff for TFWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Additive Manufacturing | 74.06-74.06 | 74.06-74.06 |
| BE Computer Science and Engineering | 76.36-85.95 | 69.63-85.95 |
| BE Civil Engineering | 63.29-63.29 | 63.29-63.29 |
| BE Electrical and Computer Engineering | 55.94-55.94 | 55.94-55.94 |
| BE Electronics & Telecom Engineering | 59.01-73.58 | 42.27-76.22 |
| BE Electrical Engineering | 26.78-26.78 | 26.78-26.78 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for AI Category
BE Electrical Engineering Cutoff for MHT-CET (AI Category) expected to fall in the range between 31.32-31.32, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electrical and Computer Engineering is expected to be the second most preferred course for AI Category with expected range of 25.73-25.73. You can check course wise expected MHT-CET 2025 cutoff for AI Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electrical Engineering | 31.32-31.32 | 31.32-31.32 |
| BE Electrical and Computer Engineering | 25.73-25.73 | 25.73-25.73 |
| BE Additive Manufacturing | 24.72-24.72 | 24.72-24.72 |
| BE Electronics & Telecom Engineering | - | 16.37-39.16 |
| BE Civil Engineering | 5.99-9.61 | 5.99-9.61 |
| BE Mechanical Engineering | 4.71-4.71 | 4.71-4.71 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GOBCH Category
BE Additive Manufacturing Cutoff for MHT-CET (GOBCH Category) expected to fall in the range between 25.97-25.97, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for GOBCH Category with expected range of 24.95-61.88. You can check course wise expected MHT-CET 2025 cutoff for GOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Additive Manufacturing | 25.97-25.97 | 25.97-25.97 |
| BE Computer Science and Engineering | 45.36-55.25 | 24.95-61.88 |
| BE Mechanical Engineering | 14.59-14.59 | 14.59-14.59 |
| BE Electronics & Telecom Engineering | 9.61-40.09 | 9.61-44.89 |
| BE Electrical Engineering | 7.5-14.23 | 7.5-14.23 |
| BE Electrical and Computer Engineering | 8.92-8.92 | 7.13-8.92 |
| BE Civil Engineering | 15.49-15.49 | 5.75-62.08 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GOBCO Category
BE Electrical Engineering Cutoff for MHT-CET (GOBCO Category) expected to fall in the range between 34.2-57.33, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Additive Manufacturing is expected to be the second most preferred course for GOBCO Category with expected range of 18.55-57.4. You can check course wise expected MHT-CET 2025 cutoff for GOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electrical Engineering | - | 34.2-57.33 |
| BE Additive Manufacturing | 18.55-18.55 | 18.55-57.4 |
| BE Computer Science and Engineering | 32.68-44.98 | 18.22-45.99 |
| BE Electronics & Telecom Engineering | 13.77-32.37 | 13.77-32.37 |
| BE Electrical and Computer Engineering | 1.03-1.03 | 1.03-1.03 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LSEBCO Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LSEBCO Category) expected to fall in the range between 59.98-62.9, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electrical and Computer Engineering is expected to be the second most preferred course for LSEBCO Category with expected range of 14.76-35.44. You can check course wise expected MHT-CET 2025 cutoff for LSEBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 59.98-59.98 | 59.98-62.9 |
| BE Electrical and Computer Engineering | 35.44-35.44 | 14.76-35.44 |
| BE Additive Manufacturing | 13.02-13.02 | 13.02-13.02 |
| BE Computer Science and Engineering | 9.21-9.21 | 9.21-9.21 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GNT2H Category
BE Computer Science and Engineering Cutoff for MHT-CET (GNT2H Category) expected to fall in the range between 15.44-71.64, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GNT2H Category with expected range of 14.93-43.2. You can check course wise expected MHT-CET 2025 cutoff for GNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 23.7-71.64 | 15.44-71.64 |
| BE Electronics & Telecom Engineering | 14.93-43.2 | 14.93-43.2 |
| BE Electrical Engineering | 14.23-14.23 | 14.23-14.23 |
| BE Civil Engineering | 13.04-13.04 | 13.04-61.91 |
| BE Electrical and Computer Engineering | 1.51-1.51 | 1.51-1.51 |
| BE Additive Manufacturing | - | 1.31-1.31 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GSCH Category
BE Electrical and Computer Engineering Cutoff for MHT-CET (GSCH Category) expected to fall in the range between 3.57-11.59, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for GSCH Category with expected range of 2.97-57.15. You can check course wise expected MHT-CET 2025 cutoff for GSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electrical and Computer Engineering | 11.59-11.59 | 3.57-11.59 |
| BE Computer Science and Engineering | 2.97-43.31 | 2.97-57.15 |
| BE Electrical Engineering | 2.94-4.02 | 2.94-35.22 |
| BE Electronics & Telecom Engineering | 1.6-57.33 | 1.6-57.33 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GSEBCO Category
BE Computer Science and Engineering Cutoff for MHT-CET (GSEBCO Category) expected to fall in the range between 13.61-51.7, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSEBCO Category with expected range of 9.69-35.16. You can check course wise expected MHT-CET 2025 cutoff for GSEBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 13.61-13.61 | 13.61-51.7 |
| BE Electronics & Telecom Engineering | 9.69-9.69 | 9.69-35.16 |
| BE Electrical and Computer Engineering | 35.16-35.16 | 7.61-35.16 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LOBCO Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LOBCO Category) expected to fall in the range between 19.82-38.03, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for LOBCO Category with expected range of 15.11-65.36. You can check course wise expected MHT-CET 2025 cutoff for LOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 19.82-38.03 | 19.82-38.03 |
| BE Computer Science and Engineering | 15.11-58.08 | 15.11-65.36 |
| BE Electrical and Computer Engineering | 6.35-6.35 | 6.35-6.35 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for EWS Category
BE Additive Manufacturing Cutoff for MHT-CET (EWS Category) expected to fall in the range between 60.44-60.44, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electrical Engineering is expected to be the second most preferred course for EWS Category with expected range of 33.25-55.22. You can check course wise expected MHT-CET 2025 cutoff for EWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Additive Manufacturing | - | 60.44-60.44 |
| BE Electrical Engineering | 33.25-45.98 | 33.25-55.22 |
| BE Electronics & Telecom Engineering | 31.32-75.65 | 31.32-75.65 |
| BE Computer Science and Engineering | 18.15-79.47 | 14.05-82.23 |
| BE Mechanical Engineering | 20.43-38.9 | 12.69-38.9 |
| BE Civil Engineering | 1.63-12.21 | 1.63-12.21 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GNT1H Category
BE Civil Engineering Cutoff for MHT-CET (GNT1H Category) expected to fall in the range between 43.31-43.31, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GNT1H Category with expected range of 20.63-36.03. You can check course wise expected MHT-CET 2025 cutoff for GNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Civil Engineering | - | 43.31-43.31 |
| BE Electronics & Telecom Engineering | 20.63-32.1 | 20.63-36.03 |
| BE Electrical Engineering | 5.38-5.38 | 5.38-5.38 |
| BE Computer Science and Engineering | 1.75-72.88 | 1.75-72.88 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LNT2H Category
BE Computer Science and Engineering Cutoff for MHT-CET (LNT2H Category) expected to fall in the range between 23.41-59.92, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LNT2H Category with expected range of 15.44-49.4. You can check course wise expected MHT-CET 2025 cutoff for LNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 23.41-52.24 | 23.41-59.92 |
| BE Electronics & Telecom Engineering | 15.44-32.47 | 15.44-49.4 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LSCH Category
BE Electrical and Computer Engineering Cutoff for MHT-CET (LSCH Category) expected to fall in the range between 8.92-8.92, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LSCH Category with expected range of 2.4-54.18. You can check course wise expected MHT-CET 2025 cutoff for LSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electrical and Computer Engineering | - | 8.92-8.92 |
| BE Electronics & Telecom Engineering | 2.4-30.11 | 2.4-54.18 |
| BE Computer Science and Engineering | 1.22-59.06 | 1.22-59.06 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for DEFOBCS Category
BE Computer Science and Engineering Cutoff for MHT-CET (DEFOBCS Category) expected to fall in the range between 11.59-42.16, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for DEFOBCS Category with expected range of 11.48-63.54. You can check course wise expected MHT-CET 2025 cutoff for DEFOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 11.59-11.59 | 11.59-42.16 |
| BE Electronics & Telecom Engineering | - | 11.48-63.54 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for DEFOPENS Category
BE Electrical Engineering Cutoff for MHT-CET (DEFOPENS Category) expected to fall in the range between 41.84-41.84, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for DEFOPENS Category with expected range of 36.52-71.23. You can check course wise expected MHT-CET 2025 cutoff for DEFOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electrical Engineering | - | 41.84-41.84 |
| BE Computer Science and Engineering | 36.52-71.23 | 36.52-71.23 |
| BE Electrical and Computer Engineering | - | 31.93-39.36 |
| BE Electronics & Telecom Engineering | 29.24-60.13 | 29.24-60.13 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GNT2O Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (GNT2O Category) expected to fall in the range between 30.86-46.51, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for GNT2O Category with expected range of 12.7-53.82. You can check course wise expected MHT-CET 2025 cutoff for GNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 30.86-30.86 | 30.86-46.51 |
| BE Computer Science and Engineering | 12.7-53.82 | 12.7-53.82 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GSCO Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (GSCO Category) expected to fall in the range between 7.46-46.32, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for GSCO Category with expected range of 4.74-40.25. You can check course wise expected MHT-CET 2025 cutoff for GSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 7.46-11.77 | 7.46-46.32 |
| BE Computer Science and Engineering | 4.74-40.25 | 4.74-40.25 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LNT1O Category
BE Computer Science and Engineering Cutoff for MHT-CET (LNT1O Category) expected to fall in the range between 75.4-75.4, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. You can check course wise expected MHT-CET 2025 cutoff for LNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 75.4-75.4 | 75.4-75.4 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LNT3H Category
BE Computer Science and Engineering Cutoff for MHT-CET (LNT3H Category) expected to fall in the range between 7.24-68.12, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. You can check course wise expected MHT-CET 2025 cutoff for LNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 7.24-7.24 | 7.24-68.12 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for ORPHAN Category
BE Computer Science and Engineering Cutoff for MHT-CET (ORPHAN Category) expected to fall in the range between 46.76-60.13, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for ORPHAN Category with expected range of 32.56-46.28. You can check course wise expected MHT-CET 2025 cutoff for ORPHAN Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 46.76-46.76 | 46.76-60.13 |
| BE Electronics & Telecom Engineering | - | 32.56-46.28 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for PWDOPENH Category
BE Computer Science and Engineering Cutoff for MHT-CET (PWDOPENH Category) expected to fall in the range between 58.16-68.12, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electrical Engineering is expected to be the second most preferred course for PWDOPENH Category with expected range of 38.87-38.87. You can check course wise expected MHT-CET 2025 cutoff for PWDOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | - | 58.16-68.12 |
| BE Electrical Engineering | - | 38.87-38.87 |
| BE Electronics & Telecom Engineering | - | 35.54-47.98 |
| BE Electrical and Computer Engineering | - | 17.71-17.71 |
| BE Additive Manufacturing | - | 13.27-13.27 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for PWDOBCH Category
BE Computer Science and Engineering Cutoff for MHT-CET (PWDOBCH Category) expected to fall in the range between 48.66-58.22, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for PWDOBCH Category with expected range of 31.62-36.08. You can check course wise expected MHT-CET 2025 cutoff for PWDOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | - | 48.66-58.22 |
| BE Electronics & Telecom Engineering | - | 31.62-36.08 |
| BE Additive Manufacturing | - | 1.03-1.03 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GSTH Category
BE Computer Science and Engineering Cutoff for MHT-CET (GSTH Category) expected to fall in the range between 36.23-60.5, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSTH Category with expected range of 32.17-51.79. You can check course wise expected MHT-CET 2025 cutoff for GSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 39.91-39.91 | 36.23-60.5 |
| BE Electronics & Telecom Engineering | - | 32.17-51.79 |
| BE Electrical Engineering | - | 22.06-22.06 |
| BE Electrical and Computer Engineering | - | 16.86-16.86 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GSTO Category
BE Additive Manufacturing Cutoff for MHT-CET (GSTO Category) expected to fall in the range between 38.79-38.79, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GSTO Category with expected range of 33.08-33.08. You can check course wise expected MHT-CET 2025 cutoff for GSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Additive Manufacturing | - | 38.79-38.79 |
| BE Electronics & Telecom Engineering | - | 33.08-33.08 |
| BE Computer Science and Engineering | - | 11.72-45.23 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GVJH Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (GVJH Category) expected to fall in the range between 32.17-51.28, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for GVJH Category with expected range of 27.21-60.73. You can check course wise expected MHT-CET 2025 cutoff for GVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 32.17-51.28 |
| BE Computer Science and Engineering | 46.06-60.73 | 27.21-60.73 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LSCO Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LSCO Category) expected to fall in the range between 33.62-33.62, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electrical Engineering is expected to be the second most preferred course for LSCO Category with expected range of 22.41-32.25. You can check course wise expected MHT-CET 2025 cutoff for LSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 33.62-33.62 |
| BE Electrical Engineering | - | 22.41-32.25 |
| BE Computer Science and Engineering | 6.57-48.77 | 6.57-48.77 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LSTH Category
BE Computer Science and Engineering Cutoff for MHT-CET (LSTH Category) expected to fall in the range between 52.36-61.64, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for LSTH Category with expected range of 43.47-51.28. You can check course wise expected MHT-CET 2025 cutoff for LSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | - | 52.36-61.64 |
| BE Electronics & Telecom Engineering | - | 43.47-51.28 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GNT3O Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (GNT3O Category) expected to fall in the range between 25.21-25.21, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. You can check course wise expected MHT-CET 2025 cutoff for GNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 25.21-25.21 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LVJO Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LVJO Category) expected to fall in the range between 33.47-33.47, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for LVJO Category with expected range of 24.54-24.54. You can check course wise expected MHT-CET 2025 cutoff for LVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 33.47-33.47 |
| BE Computer Science and Engineering | 24.54-24.54 | 24.54-24.54 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for DEFSCS Category
BE Computer Science and Engineering Cutoff for MHT-CET (DEFSCS Category) expected to fall in the range between 14.05-40.04, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. You can check course wise expected MHT-CET 2025 cutoff for DEFSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | - | 14.05-40.04 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GVJO Category
BE Computer Science and Engineering Cutoff for MHT-CET (GVJO Category) expected to fall in the range between 42.92-62.37, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electronics & Telecom Engineering is expected to be the second most preferred course for GVJO Category with expected range of 33.08-33.08. You can check course wise expected MHT-CET 2025 cutoff for GVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 62.37-62.37 | 42.92-62.37 |
| BE Electronics & Telecom Engineering | - | 33.08-33.08 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LNT3O Category
BE Computer Science and Engineering Cutoff for MHT-CET (LNT3O Category) expected to fall in the range between 25.65-50.6, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. You can check course wise expected MHT-CET 2025 cutoff for LNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 25.65-25.65 | 25.65-50.6 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LSTO Category
BE Computer Science and Engineering Cutoff for MHT-CET (LSTO Category) expected to fall in the range between 42.74-42.74, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electrical Engineering is expected to be the second most preferred course for LSTO Category with expected range of 24.59-24.59. You can check course wise expected MHT-CET 2025 cutoff for LSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | - | 42.74-42.74 |
| BE Electrical Engineering | - | 24.59-24.59 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for PWDSCH Category
BE Computer Science and Engineering Cutoff for MHT-CET (PWDSCH Category) expected to fall in the range between 13.66-47.36, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. You can check course wise expected MHT-CET 2025 cutoff for PWDSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | - | 13.66-47.36 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GNT3H Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (GNT3H Category) expected to fall in the range between 47.98-47.98, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Electrical Engineering is expected to be the second most preferred course for GNT3H Category with expected range of 30.33-30.33. You can check course wise expected MHT-CET 2025 cutoff for GNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 47.98-47.98 |
| BE Electrical Engineering | - | 30.33-30.33 |
| BE Civil Engineering | - | 11.95-11.95 |
| BE Computer Science and Engineering | 28.6-28.6 | 11.12-28.6 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LNT1H Category
BE Electrical Engineering Cutoff for MHT-CET (LNT1H Category) expected to fall in the range between 29.31-29.31, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for LNT1H Category with expected range of 24.54-24.54. You can check course wise expected MHT-CET 2025 cutoff for LNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electrical Engineering | 29.31-29.31 | 29.31-29.31 |
| BE Computer Science and Engineering | 24.54-24.54 | 24.54-24.54 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for LVJH Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LVJH Category) expected to fall in the range between 49.62-49.62, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. Furthermore,BE Computer Science and Engineering is expected to be the second most preferred course for LVJH Category with expected range of 24.54-52.75. You can check course wise expected MHT-CET 2025 cutoff for LVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | - | 49.62-49.62 |
| BE Computer Science and Engineering | 52.75-52.75 | 24.54-52.75 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for GNT1O Category
BE Computer Science and Engineering Cutoff for MHT-CET (GNT1O Category) expected to fall in the range between 59.92-59.92, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. You can check course wise expected MHT-CET 2025 cutoff for GNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 59.92-59.92 | 59.92-59.92 |
Dnyanshree Institute of Engineering & Technology Satara MHT-CET Cutoff 2025 for DEFROBCS Category
BE Computer Science and Engineering Cutoff for MHT-CET (DEFROBCS Category) expected to fall in the range between 10.46-15.21, which makes it the most in-demand course for Dnyanshree Institute of Engineering & Technology Satara. You can check course wise expected MHT-CET 2025 cutoff for DEFROBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Science and Engineering | 15.21-15.21 | 10.46-15.21 |
Also Check:
.png?h=132&w=263&mode=stretch)
.png?h=78&w=78&mode=stretch)
![Government College of Engineering - [GCEK]](https://image-static.collegedunia.com/public/college_data/images/appImage/13585_go1.jpg?h=111.44&w=263&mode=stretch)
![Karmaveer Bhaurao Patil College of Engineering - [KBPCOES]](https://image-static.collegedunia.com/public/college_data/images/appImage/13981_College building.jpg?h=111.44&w=263&mode=stretch)
![Yashoda Technical Campus - [YTC]](https://image-static.collegedunia.com/public/college_data/images/appImage/1584080418yy.jpg?h=111.44&w=263&mode=stretch)
![Arvind Gavali College of Engineering - [AGCE]](https://image-static.collegedunia.com/public/college_data/images/appImage/12875_AGCE_New.jpg?h=111.44&w=263&mode=stretch)
![Phaltan Education Society's College of Engineering - [PESCOE]](https://image-static.collegedunia.com/public/college_data/images/appImage/14561_PESCE.jpg?h=111.44&w=263&mode=stretch)
![Late Narayandas Bhawandas Chhabada Institute of Engineering and Technology - [LNBCIET ]](https://image-static.collegedunia.com/public/college_data/images/appImage/14087_lcover.jpg?h=111.44&w=263&mode=stretch)
.png?h=72&w=72&mode=stretch)
![Phaltan Education Society's College of Engineering - [PESCOE]](https://image-static.collegedunia.com/public/college_data/images/logos/1477043321Untitled.png?h=72&w=72&mode=stretch)
![Yashoda Technical Campus - [YTC]](https://image-static.collegedunia.com/public/college_data/images/logos/1584080593croppedlogo121.png?h=72&w=72&mode=stretch)
![Karmaveer Bhaurao Patil College of Engineering - [KBPCOES]](https://image-static.collegedunia.com/public/college_data/images/logos/1478773594logo.jpg?h=72&w=72&mode=stretch)
![Tatyasaheb Kore Institute of Engineering and Technology - [TKIET]](https://image-static.collegedunia.com/public/college_data/images/logos/1635402571WebsiteBan1.jpg?h=72&w=72&mode=stretch)
![Annasaheb Dange College of Engineering & Technology - [ADCET]](https://image-static.collegedunia.com/public/college_data/images/logos/1478776108logo.png?h=72&w=72&mode=stretch)
![Arvind Gavali College of Engineering - [AGCE]](https://image-static.collegedunia.com/public/college_data/images/logos/1686218743Screenshotfrom20230608153402.png?h=72&w=72&mode=stretch)
![Padmabhooshan Vasantdada Patil Institute of Technology - [PVPIT]](https://image-static.collegedunia.com/public/college_data/images/logos/1615986277Logo.png?h=72&w=72&mode=stretch)
![Jaywant College of Engineering and Management - [JCEM]](https://image-static.collegedunia.com/public/college_data/images/logos/col13874.jpg?h=72&w=72&mode=stretch)
![DY Patil Education Society's DY Patil Technical Campus - [DYP]](https://image-static.collegedunia.com/public/college_data/images/logos/1421382599images (1).jpg?h=72&w=72&mode=stretch)
![Nanasaheb Mahadik College of Engineering - [NMCE]](https://image-static.collegedunia.com/public/college_data/images/logos/1560243657download.jpeg?h=72&w=72&mode=stretch)
![Vishveshwarya Technical Campus - [VTC]](https://image-static.collegedunia.com/public/college_data/images/logos/1492760195vhgbvjhbhjkk.png?h=72&w=72&mode=stretch)
![Late Narayandas Bhawandas Chhabada Institute of Engineering and Technology - [LNBCIET ]](https://image-static.collegedunia.com/public/college_data/images/logos/1478782931loog1.png?h=72&w=72&mode=stretch)
Comments