The Official MHT-CET Cutoff 2025 for SND College of Engineering and Research Centre Yeola Nashik has not been released yet. However, students can refer to the expected MHT-CET 2025 cutoff for SND College of Engineering and Research Centre Yeola Nashik, which is based on the trends observed in previous years cutoff.
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 (Category Wise)
SND College of Engineering and Research Centre Yeola Nashik MHT-CET 2025 Expected Cutoff for GOBCH Category ranges between 2.92 - 72.12. For Round 1, SND College of Engineering and Research Centre Yeola Nashik MHT-CET 2025 is expected to be 6.19-72.12.
| Category | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| GOBCH | 6.19-72.12 | 2.92-72.12 |
| GOPENH | 1.21-74.08 | 0.9-77.17 |
| GOPENO | 1.11-73.64 | 1.11-79.89 |
| GSCH | 1.51-57.44 | 1.11-59.86 |
| GOBCO | 2-73.38 | 2-73.38 |
| GSEBCO | 16.86-69.33 | 7.19-77.17 |
| LOBCH | 0.12-72.61 | 0.12-73.43 |
| LOPENH | 2.13-76.84 | 1.92-76.84 |
| LOPENO | 0.07-79.41 | 0.07-84.88 |
| GSCO | 9.61-72.84 | 4.69-72.84 |
| GSEBCH | 2.66-58.12 | 2.66-58.12 |
| LOBCO | 6.35-71.72 | 0.49-71.72 |
| LSCH | 1.92-63.71 | 1.92-63.71 |
| LSEBCH | 5.02-71.4 | 5.02-71.4 |
| TFWS | 35.17-82.2 | 35.17-89.54 |
| LSCO | 5-62.72 | 5-71.1 |
| GNT1O | 8.34-69.6 | 8.34-69.6 |
| GVJO | 14.91-71.64 | 3.18-71.64 |
| LVJH | 31.93-35.16 | 22.57-53.27 |
| EWS | 5.66-74.51 | 0.51-74.51 |
| GNT2O | 13.06-65.29 | 13.06-65.29 |
| GNT3H | 3.27-67.82 | 3.27-67.82 |
| GNT1H | 27-63.97 | 6.28-63.97 |
| GVJH | 4.57-59.05 | 4.57-59.05 |
| LNT2H | 12.93-69.6 | 1.55-69.6 |
| GNT3O | 32.88-72.39 | 17.03-72.39 |
| GSTO | 7.97-45.46 | 4.37-69.76 |
| LSTH | 9.34-50.27 | 7.79-68.38 |
| GNT2H | 1.97-67.11 | 1.97-67.11 |
| LSEBCO | 22.89-65.63 | 3.87-65.63 |
| LNT1O | 9.81-25.51 | 9.81-35.99 |
| LNT2O | 18.15-60.44 | 4.5-60.44 |
| LNT3H | 24.87-69.6 | 7.71-76.13 |
| GSTH | 8.61-63.23 | 4.37-70.62 |
| LNT3O | 8.71-44.48 | 6.89-44.48 |
| DEFOBCS | - | 14.74-71.85 |
| DEFOPENS | 13.22-46.45 | 13.06-71.4 |
| ORPHAN | - | 5.48-59.28 |
| PWDOBCH | - | 5.01-71.58 |
| PWDOPENH | 10.77-76.73 | 7.5-76.73 |
| LSTO | 43.66-43.66 | 7.25-68.38 |
| LNT1H | 12.69-40.99 | 12.69-40.99 |
| DEFSCS | - | 16.14-53.27 |
| PWDSCH | 76.73-76.73 | 20.13-76.73 |
| LVJO | 47.98-47.98 | 5.02-54.36 |
| AI | 11.66-42.22 | 1.05-74.47 |
Also Check:
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 (Course Wise)
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GOBCH Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (GOBCH Category) expected to fall in the range between 44.53-61.69, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GOBCH Category with expected range of 42.44-72.12. You can check course wise expected MHT-CET 2025 cutoff for GOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | 46.45-52.09 | 44.53-61.69 |
| BE Computer Engineering | 53.91-72.12 | 42.44-72.12 |
| BE (Information Technology) | 50.79-69.22 | 42.09-69.22 |
| BE Mechatronics Engineering | 13.5-43.47 | 13.5-60.25 |
| BE Civil Engineering | 6.19-36.08 | 6.19-43.47 |
| BE Electrical Engineering | 7.07-37.63 | 4.33-44.48 |
| BE Mechanical Engineering | 25.31-44.53 | 2.92-47.14 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GOPENH Category
BE Computer Engineering Cutoff for MHT-CET (GOPENH Category) expected to fall in the range between 55.57-77.17, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Electronics and Computer Engineering is expected to be the second most preferred course for GOPENH Category with expected range of 49.4-65.04. You can check course wise expected MHT-CET 2025 cutoff for GOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 67.44-74.08 | 55.57-77.17 |
| BE Electronics and Computer Engineering | 53.22-54.09 | 49.4-65.04 |
| BE (Information Technology) | 62.39-70.89 | 47.77-73.37 |
| BE Mechatronics Engineering | 32.37-47.78 | 32.37-63.65 |
| BE Electrical Engineering | 20.17-43.74 | 5.23-65.67 |
| BE Civil Engineering | 8.38-44.26 | 2.12-46.62 |
| BE Mechanical Engineering | 1.21-50.97 | 0.9-60.63 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GOPENO Category
BE Computer Engineering Cutoff for MHT-CET (GOPENO Category) expected to fall in the range between 54.09-77.85, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENO Category with expected range of 45.46-79.89. You can check course wise expected MHT-CET 2025 cutoff for GOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 54.09-73.64 | 54.09-77.85 |
| BE (Information Technology) | 61.39-71.67 | 45.46-79.89 |
| BE Electronics and Computer Engineering | 52.24-57.4 | 39.97-57.4 |
| BE Mechatronics Engineering | 5.3-43.92 | 5.3-43.92 |
| BE Mechanical Engineering | 3.12-58.6 | 3.12-58.6 |
| BE Civil Engineering | 1.13-36.52 | 1.13-69.17 |
| BE Electrical Engineering | 1.11-32.17 | 1.11-41.48 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GSCH Category
BE Computer Engineering Cutoff for MHT-CET (GSCH Category) expected to fall in the range between 22.36-57.44, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSCH Category with expected range of 15.98-59.86. You can check course wise expected MHT-CET 2025 cutoff for GSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 35.68-57.44 | 22.36-57.44 |
| BE (Information Technology) | 29.24-45.95 | 15.98-59.86 |
| BE Mechatronics Engineering | 7.99-7.99 | 7.99-36.23 |
| BE Mechanical Engineering | 13.5-15.11 | 3.16-41.45 |
| BE Electronics and Computer Engineering | 7.79-43.12 | 1.51-43.12 |
| BE Electrical Engineering | 1.51-31.93 | 1.5-50.93 |
| BE Civil Engineering | 24.72-24.72 | 1.11-57.44 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GOBCO Category
BE Computer Engineering Cutoff for MHT-CET (GOBCO Category) expected to fall in the range between 45.98-73.38, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOBCO Category with expected range of 38.75-71.64. You can check course wise expected MHT-CET 2025 cutoff for GOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 45.98-73.38 | 45.98-73.38 |
| BE (Information Technology) | 47.43-71.64 | 38.75-71.64 |
| BE Electronics and Computer Engineering | 27.65-49.23 | 27.65-51.47 |
| BE Civil Engineering | 13.22-24.72 | 13.22-24.72 |
| BE Mechatronics Engineering | 9.68-31.93 | 9.68-52.36 |
| BE Mechanical Engineering | 21.91-43.47 | 9.21-45.36 |
| BE Electrical Engineering | 2-19.29 | 2-23.58 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GSEBCO Category
BE Computer Engineering Cutoff for MHT-CET (GSEBCO Category) expected to fall in the range between 62.14-77.17, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSEBCO Category with expected range of 57.4-65.63. You can check course wise expected MHT-CET 2025 cutoff for GSEBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 69.33-69.33 | 62.14-77.17 |
| BE (Information Technology) | 65.63-65.63 | 57.4-65.63 |
| BE Electronics and Computer Engineering | 47.78-47.78 | 40.09-47.78 |
| BE Mechanical Engineering | 32.56-32.56 | 28.09-32.56 |
| BE Mechatronics Engineering | 40.09-40.09 | 20.13-40.09 |
| BE Electrical Engineering | 31.56-31.56 | 11.59-46.37 |
| BE Civil Engineering | 16.86-16.86 | 7.19-43.53 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LOBCH Category
BE Computer Engineering Cutoff for MHT-CET (LOBCH Category) expected to fall in the range between 53.25-73.43, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Electronics and Computer Engineering is expected to be the second most preferred course for LOBCH Category with expected range of 52.75-55.19. You can check course wise expected MHT-CET 2025 cutoff for LOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 63.94-72.61 | 53.25-73.43 |
| BE Electronics and Computer Engineering | 52.75-55.19 | 52.75-55.19 |
| BE (Information Technology) | 53.25-69.69 | 34.27-69.69 |
| BE Mechanical Engineering | 36.12-36.12 | 20.93-36.12 |
| BE Mechatronics Engineering | 13.93-46.62 | 13.93-51.18 |
| BE Civil Engineering | 35.62-39.57 | 13.66-59.72 |
| BE Electrical Engineering | 0.12-43.47 | 0.12-49.44 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LOPENH Category
BE Computer Engineering Cutoff for MHT-CET (LOPENH Category) expected to fall in the range between 61.25-76.84, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Electronics and Computer Engineering is expected to be the second most preferred course for LOPENH Category with expected range of 52.81-67.15. You can check course wise expected MHT-CET 2025 cutoff for LOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 61.25-76.84 | 61.25-76.84 |
| BE Electronics and Computer Engineering | 54.15-61.89 | 52.81-67.15 |
| BE (Information Technology) | 58.05-72.82 | 50.79-75.6 |
| BE Mechatronics Engineering | 39.79-52.81 | 37.13-63.2 |
| BE Electrical Engineering | 10.72-44.26 | 7.52-67.15 |
| BE Civil Engineering | 4.37-48.78 | 4.37-48.78 |
| BE Mechanical Engineering | 2.13-44.89 | 1.92-44.89 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LOPENO Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (LOPENO Category) expected to fall in the range between 46.86-65.94, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LOPENO Category with expected range of 26.72-84.88. You can check course wise expected MHT-CET 2025 cutoff for LOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | 46.86-65.94 | 46.86-65.94 |
| BE Computer Engineering | 32.2-79.41 | 26.72-84.88 |
| BE (Information Technology) | 41.19-75.61 | 20.63-75.61 |
| BE Mechanical Engineering | 9.99-54.15 | 9.99-54.15 |
| BE Mechatronics Engineering | 11.29-54.59 | 9.34-54.59 |
| BE Civil Engineering | 15.21-43.85 | 2.13-59.53 |
| BE Electrical Engineering | 0.07-45.46 | 0.07-63.58 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GSCO Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (GSCO Category) expected to fall in the range between 21.59-43.03, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Mechatronics Engineering is expected to be the second most preferred course for GSCO Category with expected range of 21.54-28.33. You can check course wise expected MHT-CET 2025 cutoff for GSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | 21.59-22.17 | 21.59-43.03 |
| BE Mechatronics Engineering | - | 21.54-28.33 |
| BE Civil Engineering | 11.88-32.48 | 11.88-32.48 |
| BE Computer Engineering | 10.13-72.84 | 10.13-72.84 |
| BE Mechanical Engineering | 9.61-9.61 | 9.61-43.47 |
| BE Electrical Engineering | 20.64-20.64 | 5.56-32.55 |
| BE (Information Technology) | 32.2-66.48 | 4.69-66.48 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GSEBCH Category
BE Computer Engineering Cutoff for MHT-CET (GSEBCH Category) expected to fall in the range between 39.57-54.75, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSEBCH Category with expected range of 38.25-58.12. You can check course wise expected MHT-CET 2025 cutoff for GSEBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 47.05-50.1 | 39.57-54.75 |
| BE (Information Technology) | 38.25-58.12 | 38.25-58.12 |
| BE Mechatronics Engineering | 23.41-23.41 | 23.41-33.1 |
| BE Civil Engineering | 8.67-29.31 | 8.67-29.31 |
| BE Mechanical Engineering | 7.24-39.05 | 7.24-39.05 |
| BE Electronics and Computer Engineering | 5.71-50.1 | 5.71-55.88 |
| BE Electrical Engineering | 2.66-13.24 | 2.66-43.85 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LOBCO Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (LOBCO Category) expected to fall in the range between 38.79-57.4, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOBCO Category with expected range of 34.27-65.52. You can check course wise expected MHT-CET 2025 cutoff for LOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | 46.45-57.4 | 38.79-57.4 |
| BE (Information Technology) | 34.27-65.52 | 34.27-65.52 |
| BE Computer Engineering | 19.79-71.72 | 19.79-71.72 |
| BE Mechatronics Engineering | 18.45-27.66 | 18.45-51.05 |
| BE Civil Engineering | 28.95-42.22 | 6.49-47.8 |
| BE Mechanical Engineering | 6.35-7.93 | 6.35-32.17 |
| BE Electrical Engineering | 6.49-39.75 | 0.49-39.75 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LSCH Category
BE Computer Engineering Cutoff for MHT-CET (LSCH Category) expected to fall in the range between 37.38-63.71, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Mechatronics Engineering is expected to be the second most preferred course for LSCH Category with expected range of 17.34-41.04. You can check course wise expected MHT-CET 2025 cutoff for LSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 37.38-63.71 | 37.38-63.71 |
| BE Mechatronics Engineering | 17.34-17.34 | 17.34-41.04 |
| BE Civil Engineering | - | 16.35-34.9 |
| BE Electronics and Computer Engineering | 9.62-29.41 | 9.62-29.41 |
| BE Electrical Engineering | 6.16-24.59 | 6.16-35.54 |
| BE (Information Technology) | 36.23-51.94 | 4.04-54.12 |
| BE Mechanical Engineering | 1.92-7.61 | 1.92-32.34 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LSEBCH Category
BE Computer Engineering Cutoff for MHT-CET (LSEBCH Category) expected to fall in the range between 51.7-69.46, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSEBCH Category with expected range of 36.08-71.4. You can check course wise expected MHT-CET 2025 cutoff for LSEBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 52.99-69.46 | 51.7-69.46 |
| BE (Information Technology) | 51.7-71.4 | 36.08-71.4 |
| BE Electronics and Computer Engineering | 26.63-48.61 | 26.63-48.61 |
| BE Electrical Engineering | 29.24-29.24 | 24.05-31.93 |
| BE Mechatronics Engineering | 28.85-39.05 | 24.05-40.04 |
| BE Civil Engineering | - | 21.47-43.03 |
| BE Mechanical Engineering | 5.02-5.02 | 5.02-19.14 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for TFWS Category
BE (Information Technology) Cutoff for MHT-CET (TFWS Category) expected to fall in the range between 66.17-89.54, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for TFWS Category with expected range of 63.58-87.37. You can check course wise expected MHT-CET 2025 cutoff for TFWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 66.17-78.41 | 66.17-89.54 |
| BE Computer Engineering | 73.56-82.2 | 63.58-87.37 |
| BE Mechanical Engineering | 54.36-56.84 | 54.36-68.18 |
| BE Electronics and Computer Engineering | 49.73-68.93 | 47.46-68.93 |
| BE Mechatronics Engineering | 51.28-63.4 | 39.54-69.22 |
| BE Civil Engineering | 59.28-59.28 | 35.99-59.28 |
| BE Electrical Engineering | 35.17-61.8 | 35.17-78.42 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LSCO Category
BE Mechanical Engineering Cutoff for MHT-CET (LSCO Category) expected to fall in the range between 29.24-29.24, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSCO Category with expected range of 16.63-16.63. You can check course wise expected MHT-CET 2025 cutoff for LSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechanical Engineering | - | 29.24-29.24 |
| BE (Information Technology) | 16.63-16.63 | 16.63-16.63 |
| BE Mechatronics Engineering | - | 16.52-24.3 |
| BE Computer Engineering | 12.79-62.72 | 12.79-65.04 |
| BE Electrical Engineering | - | 12.56-57.82 |
| BE Civil Engineering | 18.55-18.55 | 7.44-18.55 |
| BE Electronics and Computer Engineering | 5-7.9 | 5-71.1 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GNT1O Category
BE Computer Engineering Cutoff for MHT-CET (GNT1O Category) expected to fall in the range between 50.81-69.6, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Mechatronics Engineering is expected to be the second most preferred course for GNT1O Category with expected range of 31.69-31.69. You can check course wise expected MHT-CET 2025 cutoff for GNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 69.6-69.6 | 50.81-69.6 |
| BE Mechatronics Engineering | 31.69-31.69 | 31.69-31.69 |
| BE Mechanical Engineering | - | 31.56-31.56 |
| BE Electrical Engineering | - | 24.77-54.36 |
| BE Electronics and Computer Engineering | 8.34-8.34 | 8.34-63.97 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GVJO Category
BE (Information Technology) Cutoff for MHT-CET (GVJO Category) expected to fall in the range between 63.69-71.64, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GVJO Category with expected range of 49.23-65.31. You can check course wise expected MHT-CET 2025 cutoff for GVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 71.64-71.64 | 63.69-71.64 |
| BE Computer Engineering | 57.82-57.82 | 49.23-65.31 |
| BE Electronics and Computer Engineering | 49.23-49.23 | 18.93-49.23 |
| BE Electrical Engineering | - | 9.46-9.46 |
| BE Mechanical Engineering | - | 3.87-3.87 |
| BE Civil Engineering | 14.91-14.91 | 3.18-21.04 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LVJH Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (LVJH Category) expected to fall in the range between 31.93-53.27, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LVJH Category with expected range of 29.81-35.16. You can check course wise expected MHT-CET 2025 cutoff for LVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | 31.93-31.93 | 31.93-53.27 |
| BE Computer Engineering | 35.16-35.16 | 29.81-35.16 |
| BE Electrical Engineering | - | 25.67-30.26 |
| BE Civil Engineering | - | 22.57-22.57 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for EWS Category
BE Computer Engineering Cutoff for MHT-CET (EWS Category) expected to fall in the range between 39.9-74.51, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Mechatronics Engineering is expected to be the second most preferred course for EWS Category with expected range of 20.94-40.65. You can check course wise expected MHT-CET 2025 cutoff for EWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 39.9-74.51 | 39.9-74.51 |
| BE Mechatronics Engineering | 20.94-21.47 | 20.94-40.65 |
| BE (Information Technology) | 18.93-71.64 | 14.19-72.61 |
| BE Electronics and Computer Engineering | 8.1-63.97 | 6.89-69.3 |
| BE Civil Engineering | 6.82-68.18 | 6.82-68.18 |
| BE Electrical Engineering | 5.66-40.65 | 4.09-57.93 |
| BE Mechanical Engineering | 6.82-24.13 | 0.51-49.61 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GNT2O Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (GNT2O Category) expected to fall in the range between 39.23-49.22, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for GNT2O Category with expected range of 38.03-43.85. You can check course wise expected MHT-CET 2025 cutoff for GNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | 39.23-49.22 | 39.23-49.22 |
| BE Mechanical Engineering | 38.03-38.03 | 38.03-43.85 |
| BE (Information Technology) | 34.27-47.78 | 34.27-47.78 |
| BE Computer Engineering | 33.82-65.29 | 27.77-65.29 |
| BE Civil Engineering | 15.54-15.54 | 15.54-15.54 |
| BE Electrical Engineering | 13.06-29.04 | 13.06-29.04 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GNT3H Category
BE Computer Engineering Cutoff for MHT-CET (GNT3H Category) expected to fall in the range between 51.89-67.82, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT3H Category with expected range of 44.35-57.21. You can check course wise expected MHT-CET 2025 cutoff for GNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 58.81-67.82 | 51.89-67.82 |
| BE (Information Technology) | 55.57-57.21 | 44.35-57.21 |
| BE Electronics and Computer Engineering | 40.99-47.14 | 40.99-47.14 |
| BE Mechanical Engineering | 43.85-43.85 | 24.42-43.85 |
| BE Civil Engineering | 24.13-39.9 | 24.13-39.9 |
| BE Electrical Engineering | 3.27-39.05 | 3.27-39.05 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GNT1H Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (GNT1H Category) expected to fall in the range between 40.73-40.73, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT1H Category with expected range of 22.25-63.97. You can check course wise expected MHT-CET 2025 cutoff for GNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | 40.73-40.73 | 40.73-40.73 |
| BE (Information Technology) | 27-63.97 | 22.25-63.97 |
| BE Mechatronics Engineering | - | 14.31-14.31 |
| BE Computer Engineering | 27.33-61.8 | 12.47-61.8 |
| BE Mechanical Engineering | 33.82-33.82 | 7.55-54.59 |
| BE Electrical Engineering | - | 6.28-32 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GVJH Category
BE Mechanical Engineering Cutoff for MHT-CET (GVJH Category) expected to fall in the range between 22.23-42.73, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GVJH Category with expected range of 19.93-57.2. You can check course wise expected MHT-CET 2025 cutoff for GVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechanical Engineering | 42.73-42.73 | 22.23-42.73 |
| BE Computer Engineering | 39.31-57.2 | 19.93-57.2 |
| BE Mechatronics Engineering | 13.06-13.06 | 13.06-22.11 |
| BE Civil Engineering | 17.24-17.24 | 5.72-17.24 |
| BE (Information Technology) | 23.33-59.05 | 4.58-59.05 |
| BE Electrical Engineering | 4.57-22.5 | 4.57-42.16 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LNT2H Category
BE Computer Engineering Cutoff for MHT-CET (LNT2H Category) expected to fall in the range between 69.6-69.6, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LNT2H Category with expected range of 28.95-28.95. You can check course wise expected MHT-CET 2025 cutoff for LNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 69.6-69.6 | 69.6-69.6 |
| BE (Information Technology) | 28.95-28.95 | 28.95-28.95 |
| BE Mechatronics Engineering | 18.15-18.15 | 14.74-47.78 |
| BE Civil Engineering | 31.62-31.62 | 8.84-31.62 |
| BE Electrical Engineering | 12.93-40.04 | 1.55-53.61 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GNT3O Category
BE Computer Engineering Cutoff for MHT-CET (GNT3O Category) expected to fall in the range between 72.39-72.39, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT3O Category with expected range of 42.74-42.74. You can check course wise expected MHT-CET 2025 cutoff for GNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 72.39-72.39 | 72.39-72.39 |
| BE (Information Technology) | 42.74-42.74 | 42.74-42.74 |
| BE Electrical Engineering | 44.89-44.89 | 17.44-44.89 |
| BE Mechanical Engineering | 32.88-32.88 | 17.03-32.88 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GSTO Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (GSTO Category) expected to fall in the range between 47.05-47.89, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Civil Engineering is expected to be the second most preferred course for GSTO Category with expected range of 35.44-39.75. You can check course wise expected MHT-CET 2025 cutoff for GSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | - | 47.05-47.89 |
| BE Civil Engineering | - | 35.44-39.75 |
| BE (Information Technology) | 34.93-45.46 | 34.93-45.46 |
| BE Mechatronics Engineering | - | 19.82-37.21 |
| BE Mechanical Engineering | - | 9.96-28.33 |
| BE Computer Engineering | 7.97-34.27 | 7.97-69.76 |
| BE Electrical Engineering | - | 4.37-16.3 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LSTH Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (LSTH Category) expected to fall in the range between 50.86-52.6, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for LSTH Category with expected range of 32.83-32.83. You can check course wise expected MHT-CET 2025 cutoff for LSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | - | 50.86-52.6 |
| BE Mechanical Engineering | - | 32.83-32.83 |
| BE Mechatronics Engineering | - | 27.15-58.22 |
| BE (Information Technology) | 23.95-23.95 | 23.95-58.85 |
| BE Electrical Engineering | 10.31-10.31 | 10.31-36.12 |
| BE Computer Engineering | 9.34-50.27 | 9.34-68.38 |
| BE Civil Engineering | 10.87-13.95 | 7.79-46.76 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GNT2H Category
BE Computer Engineering Cutoff for MHT-CET (GNT2H Category) expected to fall in the range between 44.45-67.11, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT2H Category with expected range of 35.43-60.75. You can check course wise expected MHT-CET 2025 cutoff for GNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 44.45-67.11 | 44.45-67.11 |
| BE (Information Technology) | 35.43-60.75 | 35.43-60.75 |
| BE Civil Engineering | 20.57-40.11 | 20.57-63.71 |
| BE Mechanical Engineering | 11.12-41.04 | 11.12-41.04 |
| BE Mechatronics Engineering | 13.06-13.06 | 8.34-44.05 |
| BE Electronics and Computer Engineering | 7.62-48.87 | 7.62-48.87 |
| BE Electrical Engineering | 1.97-37.21 | 1.97-37.21 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LSEBCO Category
BE Computer Engineering Cutoff for MHT-CET (LSEBCO Category) expected to fall in the range between 60.63-65.63, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Electronics and Computer Engineering is expected to be the second most preferred course for LSEBCO Category with expected range of 60.5-60.5. You can check course wise expected MHT-CET 2025 cutoff for LSEBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 65.63-65.63 | 60.63-65.63 |
| BE Electronics and Computer Engineering | 60.5-60.5 | 60.5-60.5 |
| BE Mechanical Engineering | 29.41-29.41 | 16.86-29.41 |
| BE Civil Engineering | - | 15.49-15.49 |
| BE Electrical Engineering | 22.89-22.89 | 3.87-22.89 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LNT1O Category
BE Civil Engineering Cutoff for MHT-CET (LNT1O Category) expected to fall in the range between 25.51-25.51, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LNT1O Category with expected range of 9.81-35.99. You can check course wise expected MHT-CET 2025 cutoff for LNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Civil Engineering | 25.51-25.51 | 25.51-25.51 |
| BE Computer Engineering | 9.81-9.81 | 9.81-35.99 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LNT2O Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (LNT2O Category) expected to fall in the range between 48.87-50.04, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LNT2O Category with expected range of 38.34-60.44. You can check course wise expected MHT-CET 2025 cutoff for LNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | 50.04-50.04 | 48.87-50.04 |
| BE Computer Engineering | 60.44-60.44 | 38.34-60.44 |
| BE Mechanical Engineering | 18.15-18.15 | 4.5-18.15 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LNT3H Category
BE (Information Technology) Cutoff for MHT-CET (LNT3H Category) expected to fall in the range between 69.6-69.6, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LNT3H Category with expected range of 65.23-76.13. You can check course wise expected MHT-CET 2025 cutoff for LNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 69.6-69.6 | 69.6-69.6 |
| BE Computer Engineering | 65.23-69.22 | 65.23-76.13 |
| BE Electrical Engineering | 24.87-24.87 | 24.87-24.87 |
| BE Mechatronics Engineering | 33.82-35.59 | 7.71-35.59 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for GSTH Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (GSTH Category) expected to fall in the range between 45.92-48.61, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSTH Category with expected range of 41.48-70.62. You can check course wise expected MHT-CET 2025 cutoff for GSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | - | 45.92-48.61 |
| BE (Information Technology) | 41.55-63.23 | 41.48-70.62 |
| BE Mechatronics Engineering | - | 31.32-37.63 |
| BE Mechanical Engineering | - | 25.65-39.33 |
| BE Computer Engineering | 8.61-40.65 | 8.61-58.9 |
| BE Electrical Engineering | 36.52-36.52 | 7.15-42.22 |
| BE Civil Engineering | 15.49-15.49 | 4.37-35.78 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LNT3O Category
BE Mechanical Engineering Cutoff for MHT-CET (LNT3O Category) expected to fall in the range between 8.71-8.71, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Civil Engineering is expected to be the second most preferred course for LNT3O Category with expected range of 6.89-44.48. You can check course wise expected MHT-CET 2025 cutoff for LNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechanical Engineering | 8.71-8.71 | 8.71-8.71 |
| BE Civil Engineering | 44.48-44.48 | 6.89-44.48 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for DEFOBCS Category
BE (Information Technology) Cutoff for MHT-CET (DEFOBCS Category) expected to fall in the range between 63.58-71.85, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for DEFOBCS Category with expected range of 62.14-62.14. You can check course wise expected MHT-CET 2025 cutoff for DEFOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | - | 63.58-71.85 |
| BE Computer Engineering | - | 62.14-62.14 |
| BE Electronics and Computer Engineering | - | 50.86-60.91 |
| BE Mechanical Engineering | - | 37.6-57.4 |
| BE Electrical Engineering | - | 32-57.4 |
| BE Mechatronics Engineering | - | 22.17-63.82 |
| BE Civil Engineering | - | 14.74-29.53 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for DEFOPENS Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (DEFOPENS Category) expected to fall in the range between 55.19-60.6, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for DEFOPENS Category with expected range of 50.6-57.4. You can check course wise expected MHT-CET 2025 cutoff for DEFOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | - | 55.19-60.6 |
| BE Mechanical Engineering | - | 50.6-57.4 |
| BE Civil Engineering | - | 28.42-41.33 |
| BE Computer Engineering | 26.9-46.45 | 26.9-71.4 |
| BE Mechatronics Engineering | - | 26.13-45.98 |
| BE (Information Technology) | 13.22-13.22 | 13.22-63.54 |
| BE Electrical Engineering | - | 13.06-50.63 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for ORPHAN Category
BE Computer Engineering Cutoff for MHT-CET (ORPHAN Category) expected to fall in the range between 59.28-59.28, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for ORPHAN Category with expected range of 56.84-56.84. You can check course wise expected MHT-CET 2025 cutoff for ORPHAN Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 59.28-59.28 |
| BE (Information Technology) | - | 56.84-56.84 |
| BE Electronics and Computer Engineering | - | 49.34-52.52 |
| BE Mechanical Engineering | - | 25.78-39.33 |
| BE Mechatronics Engineering | - | 24.77-36.23 |
| BE Electrical Engineering | - | 5.65-32.55 |
| BE Civil Engineering | - | 5.48-28.68 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for PWDOBCH Category
BE Computer Engineering Cutoff for MHT-CET (PWDOBCH Category) expected to fall in the range between 60.25-60.25, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE (Information Technology) is expected to be the second most preferred course for PWDOBCH Category with expected range of 57.82-57.82. You can check course wise expected MHT-CET 2025 cutoff for PWDOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 60.25-60.25 |
| BE (Information Technology) | - | 57.82-57.82 |
| BE Electronics and Computer Engineering | - | 44.26-54.39 |
| BE Mechatronics Engineering | - | 36.12-62.25 |
| BE Mechanical Engineering | - | 25.06-71.58 |
| BE Civil Engineering | - | 19.55-47.89 |
| BE Electrical Engineering | - | 5.01-57.4 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for PWDOPENH Category
BE (Information Technology) Cutoff for MHT-CET (PWDOPENH Category) expected to fall in the range between 61.8-66.84, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Electronics and Computer Engineering is expected to be the second most preferred course for PWDOPENH Category with expected range of 52.88-54.39. You can check course wise expected MHT-CET 2025 cutoff for PWDOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | - | 61.8-66.84 |
| BE Electronics and Computer Engineering | - | 52.88-54.39 |
| BE Mechanical Engineering | 76.73-76.73 | 43.96-76.73 |
| BE Mechatronics Engineering | - | 37.6-57.82 |
| BE Electrical Engineering | - | 11.77-33.08 |
| BE Computer Engineering | 10.77-10.77 | 10.77-71.4 |
| BE Civil Engineering | - | 7.5-39.75 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LSTO Category
BE (Information Technology) Cutoff for MHT-CET (LSTO Category) expected to fall in the range between 63.4-68.38, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Electronics and Computer Engineering is expected to be the second most preferred course for LSTO Category with expected range of 54.39-56.01. You can check course wise expected MHT-CET 2025 cutoff for LSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | - | 63.4-68.38 |
| BE Electronics and Computer Engineering | - | 54.39-56.01 |
| BE Computer Engineering | 43.66-43.66 | 43.66-43.66 |
| BE Mechanical Engineering | - | 36.18-36.18 |
| BE Electrical Engineering | - | 25.65-25.65 |
| BE Civil Engineering | - | 7.25-10.85 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LNT1H Category
BE (Information Technology) Cutoff for MHT-CET (LNT1H Category) expected to fall in the range between 40.99-40.99, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Electrical Engineering is expected to be the second most preferred course for LNT1H Category with expected range of 32.09-32.09. You can check course wise expected MHT-CET 2025 cutoff for LNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 40.99-40.99 | 40.99-40.99 |
| BE Electrical Engineering | - | 32.09-32.09 |
| BE Mechanical Engineering | 25.78-25.78 | 25.78-25.78 |
| BE Civil Engineering | 12.69-12.69 | 12.69-32.48 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for DEFSCS Category
BE Computer Engineering Cutoff for MHT-CET (DEFSCS Category) expected to fall in the range between 25.99-53.27, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Electrical Engineering is expected to be the second most preferred course for DEFSCS Category with expected range of 16.14-32.56. You can check course wise expected MHT-CET 2025 cutoff for DEFSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 25.99-53.27 |
| BE Electrical Engineering | - | 16.14-32.56 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for PWDSCH Category
BE Mechanical Engineering Cutoff for MHT-CET (PWDSCH Category) expected to fall in the range between 76.73-76.73, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Computer Engineering is expected to be the second most preferred course for PWDSCH Category with expected range of 29.04-29.04. You can check course wise expected MHT-CET 2025 cutoff for PWDSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechanical Engineering | 76.73-76.73 | 76.73-76.73 |
| BE Computer Engineering | - | 29.04-29.04 |
| BE Electrical Engineering | - | 20.13-63.65 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for LVJO Category
BE Electronics and Computer Engineering Cutoff for MHT-CET (LVJO Category) expected to fall in the range between 47.98-54.36, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Electrical Engineering is expected to be the second most preferred course for LVJO Category with expected range of 5.02-5.02. You can check course wise expected MHT-CET 2025 cutoff for LVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics and Computer Engineering | 47.98-47.98 | 47.98-54.36 |
| BE Electrical Engineering | - | 5.02-5.02 |
SND College of Engineering and Research Centre Yeola Nashik MHT-CET Cutoff 2025 for AI Category
BE Mechanical Engineering Cutoff for MHT-CET (AI Category) expected to fall in the range between 16-74.47, which makes it the most in-demand course for SND College of Engineering and Research Centre Yeola Nashik. Furthermore,BE Mechatronics Engineering is expected to be the second most preferred course for AI Category with expected range of 13.5-20.73. You can check course wise expected MHT-CET 2025 cutoff for AI Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechanical Engineering | 30.59-42.22 | 16-74.47 |
| BE Mechatronics Engineering | 13.5-13.5 | 13.5-20.73 |
| BE Electrical Engineering | 11.66-35.67 | 2.4-35.67 |
| BE Civil Engineering | 17.85-30.33 | 1.05-30.33 |
Also Check:
![K.K. Wagh Institute of Engineering Education & Research - [KKWIEER]](https://image-static.collegedunia.com/public/college_data/images/appImage/57504_cover.jpg?h=111.44&w=263&mode=stretch)
![Sandip Institute of Technology and Research Center - [SITRC]](https://image-static.collegedunia.com/public/college_data/images/appImage/1503637927cover.jpg?h=111.44&w=263&mode=stretch)
.jpeg?h=90.56&w=161&mode=stretch)
.jpeg?h=72&w=72&mode=stretch)
![Pravara Rural Engineering College - [PREC] Loni](https://image-static.collegedunia.com/public/college_data/images/logos/1659073916index.jpg?h=72&w=72&mode=stretch)
![Sandip Institute of Engineering and Management - [SIEM]](https://image-static.collegedunia.com/public/college_data/images/logos/1475666165logo01.png?h=72&w=72&mode=stretch)
![Sir Visvesvaraya Institute Of Technology - [SVIT] Chincholi](https://image-static.collegedunia.com/public/college_data/images/logos/1720774501lohooo.png?h=72&w=72&mode=stretch)
![Matoshri College of Engineering and Research Centre - [MCOERC] Eklahare](https://image-static.collegedunia.com/public/college_data/images/logos/1415343944Capture.png?h=72&w=72&mode=stretch)
![Jawahar Education Society's Institute of Technology Management & Research [JIT]](https://image-static.collegedunia.com/public/college_data/images/logos/1423560369LASREGS.jpg?h=72&w=72&mode=stretch)
![Loknete Gopinathji Munde Institute of Engineering Education & Research - [LOGMIEER]](https://image-static.collegedunia.com/public/college_data/images/logos/1559822296download.png?h=72&w=72&mode=stretch)
Comments