MTech Welding Technology: Admission Process, Entrance Exams, Syllabus, Top Colleges, Jobs 2024

Q: Ques: How much time is given for GATE?

Ans: 3 hours is given to the candidates for the GATE entrance examination.

Q: Ques: Is there any negative marking in the GATE question paper?

Ans: There is no negative marking for the NAT and MSQ type of questions. The MCQ carrying one mark if answered wrongly 1/3 marks are deducted and for the two marks questions, 2/3 marks are deducted for every wrong answer.

Q: Ques: What is the minimum score for the category candidates?

Ans: The candidates of the OBC category have to score a minimum aggregate of 55% in their undergraduate program and the candidates belonging to the SC and ST category have to score a minimum score of 50%.

Q: Ques: Is admission to MTech Welding Technology at IIT and NIT possible without giving GATE?

Ans: No, the candidate who has not given the GATE entrance examination is not eligible to get a seat in IIT and NIT in welding technology. The candidate has to compulsorily sit for GATE.

Q: Ques: What if the candidate does not sit for GATE?

Ans: To get admission at state level colleges the candidate either has to sit for GATE or can appear for the college entrance examination conducted for admission to MTech.

Q: Ques: MTech in Welding Technology is a full time or a part-time course?

Ans: MTech in Welding Technology is a full-time course of a duration of 2 years.

Q: Ques: Who can go for the Welding Technology?

Ans: The candidates with good eyesight and good eye-hand coordination can go for Welding Technology. They must have a good ability to concentrate.

Q: Ques: Is it compulsory to attempt all the questions?

Ans: Yes, it is compulsory to attempt all the questions. But the candidate must be aware of the negative marking so that he/she does not lose his/her marks.

Q: Ques: Are NAT questions subjective?

Ans: The NAT type of questions are not subjective. The examinee has to choose the numerical which make up the answer to the question asked.

Question

Ques. I got a call from IIT Bhubaneswar as well as from IIT Gandhinagar for MTech in Machine design branch. Which IIT is better?

Answer 1

Ans. I think you should go for M.Tech in Mechanical Systems Design at IIT Bhubaneswar. IIT Gandhinagar offers an M.Tech in Mechanical Engineering, but not specifically in Machine Design. IIT Bhubaneswar is placed #47 in the Engineering category as per the NIRF 2023 Ranking. The School of Mechanical Sciences at IIT Bhubaneswar has fully equipped labs. It has a state-of-the-art computing lab with thirty workstations connected to an eighteen-blade server. Here’s a comparison between IIT Bhubaneswar and IIT Gandhinagar: Parameters IIT Bhubaneswar Mechanical Systems Design IIT Gandhinagar Overall NIRF 2023 Engineering Ranking 47 18 Placement % (2023) 100 % 76.22% Highest Package (2023) INR 11.90 LPA - Average Package (2023) INR 8.58 LPA INR 19.34 LPA Median Package (2023) INR 9.80 LPA INR 15.18 LPA Top Recruiters on Campus (2023) Google, Microsoft, Reliance Industries, Accenture Japan, Caterpillar Accenture, Amul, Cognizant, Deloitte, Adobe (The M.Tech placements data is not available for IIT Gandhinagar) Although IIT Gandhinagar has a slightly higher ranking than IIT Bhubaneswar, the Mechanical Sciences Department at IIT Bhubaneswar has a much better overall value. I would recommend you choose IIT Bhubaneswar Mechanical Systems Design over IIT Gandhinagar Mechanical for your M.Tech degree. Read more

Answer 2

Ans. The online PGP in AI and ML program from BITS Pilani offers a comprehensive curriculum in AI, ML, deep learning, big data processing and more. You will develop a deeper understanding of AI and ML to get equipped with the skills and knowledge to be used in various businesses. BITS Pilani offers it in collaboration with Purdue University in WILP mode for working professionals. It is an 11-month-long course targeted at working professionals who wish to learn about the advances in AI and ML while continuing their work. The total program fee is INR 2.45 Lakhs. The eligibility criteria for this program are listed below. Employed working professionals with a BE/BTech degree. Candidates with an MSc in Mathematics or Statistics degree. Candidates should be working in the relevant field. Candidates with a working knowledge of programming languages like Python. Read more

Answer 3

Ans. The workload for M.Tech Mechanical students is quite manageable at SVNIT. In the first year of M.Tech, one has to complete the coursework and attend classes from 8:30 am to 5:40 pm. In the second year, one has to complete the dissertation work and Teaching Assistant Duty (which is for 8 hours per week). SVNIT offers five M.Tech specializations in the related fields. These are- Mechanical Engineering, CAD/CAM, Thermal System Design, Turbo Machines and Manufacturing Engineering. The workload varies from department to department. One gets ample time to prepare for competitive exams as an M.Tech Mechanical student over here. Most people in M.Tech Mechanical do not attend classes regularly, and instead prepare for their entrance exams. So you need not worry on the attendance front. Read more

Answer 4

Ans. The placement is not good for M.Tech courses. Pursuing an M.Tech from SVNIT is a better option if one wishes to prepare for competitive exams simultaneously. Taking out time for preparation isn’t difficult if one is focused and disciplined. In 2022,18 students were successfully placed on campus from M.Tech Mechanical. The highest package was 9.42 LPA, the average package was 6.86 LPA, and the lowest package was 5 LPA. As for M.Tech Manufacturing, 21 students were successfully placed on campus. The highest package was 9.58 LPA, the average package was 6.29 LPA, and the lowest package was 4.80 LPA. Some M.Tech specializations like Computer Science, Communications System, CAD/CAM and Structure receive a few core companies for placements. But that number is far from satisfactory. Moreover, very few people are selected for these jobs. Mechanical, Thermal System Design, SMFE and MSc. Physics,mainly receive teaching offers. Thus, the placements for M.Tech Mechanical are not satisfactory at SVNIT. Read more

Answer 5

Ans. In all engineering colleges, BTech students are given more preference than MTech students because they can do the job at a lesser salary than MTech students. Moreover, they are more in number and are ready to grab any role whatsoever. MTech students on the other hand prefer core jobs that align with their academic profile and specific interests. So the placement opportunities offered to Masters students are less. Mostly, they have two options to choose from, academia or corporate. Academics: Many institutes offer teaching positions to master students either as a college professor or for the role of an instructor at an Entrance Exam preparation institute, Master students of the Thermal branch are eligible for these roles. Corporate: The Mechanical department students are often recruited by companies like GE, Mercedes, Bosch, Yazaki, Alstom, etc. do come for recruitment. The requirements vary each year. In reality, the chances of landing a job as an MTech student at NIT Surathkal depend on the market rather than the institute. NITK offers a great research culture that instills all the necessary skills. The placements are unpredictable though. Ultimately I will advise you to opt for a Master’s degree only if you are really interested in getting a specialization degree because there is no guarantee you’ll get a job in the end.Read more

Answer 6

Ans. NIT Silchar is a prestigious engineering college that imparts quality education in various fields. However, the PG courses aren't very well-known and only the UG courses have gained fame over time. It is therefore advisable to check the profiles of the teachers in the respective department. Additionally, NIT Silchar is located in a remote location and you might find it difficult to procure your equipment for projects. MTech depends on the quality of the research and project you have completed and if you fail to accomplish it your MTech degree is invaluable. Most companies visiting NIT Silchar prefer BTech students to MTech students. So getting a good job let alone a core job is very difficult here. The institute has no international ties so your future prospects may narrow down further. Consider all the above factors before making your final decision!Read more

Answer 7

Ans. My brother had to appear for an online interview because he applied during the corona time. He joined Google Meet on time and began with his introductions. The interviewers asked him a number of questions like Describe the college you did your bachelor's from and the placement scenario there Is there any topic you are most comfortable with for the technical questions? What is compressible flow and compressible fluid? what is internal energy? PV^? what are its assumptions? Define isoentropic process dh = M Cp dt where can we apply this? Is it valid for gases only? Define Cp and Cv For solids why do we use Q=mcdt .what is C here? Why is solid C constant here? Basically, he was bombarded with a lot of technical questions although they helped him a lot. From the interview experience, he arrived at the conclusion that to ace the interview one must have revised the notes he/she prepared while studying for GATE. Read more

Answer 8

Ans. Well honestly, once you are in the grasp of the IISc magic, you will forget about placements, and your hunger for higher studies and research will grow instead. The intense workload and the dynamic research environment will bring you close to some of the geniuses who may be pursuing a Ph.D., UG, or master's. Interacting with them will make you realize that higher studies are a better option. Some who go for jobs anyway, come back to get a PhD sometime later. This is what the IISc effect is after all. As for the IISC placements for MTech Mechanical Engineering, students receive a minimum of 8 LPA packages with no limit on top packages varying from 15-25 LPA CTC. The major recruiters include companies like TATA motors, TATA steel, TCS research, Mahindra motors, Philips, Airbus, General Electric, Rolls Royce, TATA advanced system, PTC, L&T, and other design, manufacturing, and petroleum companies. The best part is that students of this branch can sit for placements in companies of Aerospace, Civil, Chemical, and Material Engineering as well. In all placements at IISc won't be an issue for either branch yet I will say again, judging a research-oriented institute like IISc on the basis of placements is not justified. Read more

Answer 9

Ans. M.Tech in Machine Design at IIT Bhubaneswar is good. Most of the faculty is excellent when it comes to teaching. The professors always encourage the students, both inside the classroom and outside it. A Design and Innovation Centre (DIC) in the Department runs directly under MHRD. Here the students can try to execute their ideas. The placement scenario is equally good. Students are placed in various companies and teaching institutes. The rest of the students decide to go for their Ph.D. The placement statistics for M.Tech in Machine Design for the year 2023 at IIT Bhubaneswar are- Particulars IIT Bhubaneswar Machine Design % of students placed 100 % Highest CTC 11.90 LPA Lowest CTC 6.25 LPA Average CTC 8.58 LPA Median CTC 9.80 LPA Thus, the course of M.Tech in Machine Design at IIT Bhubaneswar has a good faculty, ample placement opportunities, and all the necessary facilities. You should consider choosing this course.Read more

Answer 10

Ans. The better institute for MTech out of IIT Hyderabad and NIT Trichy depends on what you want to do after MTech. For those inclined towards research work and are willing to go for higher education like Ph.D. from a foreign university, IIT Hyderabad is the most suitable option. This is because it is a new IIT and thus has the best research and lab facilities in comparison to older IITs and NITs. The MTech program here will bring about a drastic change in your overall personality. For those who want to get employed as soon as possible, then NIT Trichy is a preferable choice. This is because The sole purpose of students coming here is to get placed with lucrative packages The initial days witness top firms after which only average companies pay a visit to the campus The placement percentage is almost 100% every year The teachers do it encourage research culture at all. This does not mean that IIT Hyderabad does not have placement opportunities. It’s just that for placements specifically, NIT is better but overall IIT Hyderabad is the best option.Read more

Course Level	Post-Graduation
Full-Form	Master of Technology in Welding Technology
Duration	2 Years
Examination Type	Semester wise
Eligibility	Undergraduate degree with a minimum aggregate of 50% from a recognized university
Admission Process	Counseling after the entrance examination
Course Fee	INR 1 – 2 Lac
Average Salary	INR 3 – 4 Lac
Top Recruiting Companies	Aditya Birla Group, National Institute of Secondary Steel, Ashok Leyland, etc.
Job Positions	Automotive Production Consultant, Manufacturing Engineering, etc.

Exam Name	Exam Dates
GATE	Check Here
SRMJEE	Check Here
WBJEE	Check Here
AP PGECET	Check Here
TS PGECET	Check Here

Semester I	Semester II
Engineering Mathematics	Welding Metallurgy
Physical Metallurgy	Welding Codes and Standards
Advanced Welding and Allied Processes	Welding Application Technology
Elective I	Elective III
Elective II	Elective IV
-	Elective V
Semester III	Semester IV
Project Work	Project Work
Electives
Electrical Aspects of Welding	Design of Weldments
Materials Characterization	Computer-Aided Design and Manufacturing
Computer Integrated Manufacturing	Value Engineering
Finite Element Methods	Metallic Materials
Theory of Plasticity	Life Assessment of Welded Structures
Mechanical Behaviour of Materials	Process Modelling
Corrosion of Weldments	Welding Economics and Management
Non- Destructive Testing and Failure Analysis	Repair Welding and Reclamation

College Name	Average Annual Fee
Indian Institute of Technology, Roorkee	INR 1.05 Lac
National Institute of Technology, Tiruchirappalli (NIT Trichy)	INR 78,500
Aurora Engineering College, Nalgonda	INR 57,000
Government College of Engineering, Salem	INR 10,300

Parameters	IIT Roorkee	NIT Trichy
NIRF Ranking	6	12
Outlook Ranking	6	8
Average Annual Fee	INR 1.05 Lac	INR 78,500
Average Placement Package	INR 18.92 Lac	INR 6.25 Lac
Total seats	18	28
Counselling Process	GATE COAP	GATE CCMT

MTech Welding Technology: Admission Process, Entrance Exams, Syllabus, Top Colleges, Jobs 2024

M.Tech Welding Technology Latest Updates

MTech Welding Technology: Course Highlights

MTech Welding Technology: Admission Process

MTech Welding Technology: Eligibility Criteria

MTech Welding Technology: Entrance Exams

How to prepare for the entrance exam?

MTech Welding Technology: Course Syllabus

MTech Welding Technology: Top Colleges

MTech Welding Technology: College Comparison

MTech Welding Technology: Job Profile

MTech Welding Technology: Future Scopes

MTech Welding Technology: FAQs

Master of Technology [M.Tech] (Welding Technology) : 48 answered questions

Ques. I got a call from IIT Bhubaneswar as well as from IIT Gandhinagar for MTech in Machine design branch. Which IIT is better?

Ques. What is the eligibility criteria for BITS Pilani MTech in AI and ML for working professionals?

Ques. How is the M.Tech atmosphere (workload) in SVNIT Surat in mechanical engineering?

Ques. How is the placement of an MTech in mechanical engineering from SVNIT, Surat? Does core companies offer placement to MTech candidates?

Ques. How are the placements at NIT Surathkal for an M.Tech in thermal?

Ques. What is your review on NIT Silchar for M.tech in mechanical engineering?

Ques. How was your interview experience for IIT Gandhinagar for an MTech in mechanical engineering?

Ques. What are placement opportunities for students pursuing an M.Tech in mechanical engineering from IISC, Bangalore?

Ques. How is an M.Tech in machine design in IIT Bhubaneswar?

Ques. Which one is better for the MTech: fluid and energy system in IIT Hyderabad or thermal in NIT Trichy?

Comments

Master of Technology [M.Tech] (Computer Science and Engineering)

Master of Technology [M.Tech] (Structural Engineering)

Master of Technology [M.Tech] (Electronics and Communication Engineering)

Master of Engineering [ME] (Computer Science and Engineering)

Master of Technology [M.Tech] (Mechanical Engineering)

Master of Technology [M.Tech] (Welding Technology) Colleges IN INDIA

NIT Trichy

NIT Warangal

Indus Institute of Technology & Engineering - [IITE]

Indian Institute of Welding - [IIW]

SUBSCRIBE TO OUR NEWS LETTER

Job Profile	Job Description	Average Annual Salary
Welding Engineer	They work to develop welding techniques and procedures. They apply welding equipment to problems involving the fabrication of metals.	INR 4 to 5 Lac
Manufacturing Engineer	They design and conduct research programs by evaluating research programs. They apply the knowledge of product design, fabrication, assembly, tooling, and materials.	INR 3 to 4 Lac
Manufacturing Inspector	They monitor projects and operations to meet the production standards of the firm. They inspect, test, and measure materials that are being produced by the organization.	INR 2 to 3 Lac
Automotive Production Consultant	They design, manufacture, distribute, market, and oversee sales and after-sales care of cars, motorbikes, and other commercial vehicles.	INR 2 to 3 Lac
Lecturer Professor	They teach the graduates and the undergraduates at the college level.	INR 3 to 7 Lac