Content Curator | Updated on - Mar 30, 2026

The M.Tech in Manufacturing & Management (also referred to as Manufacturing Systems and Management) at Government Engineering College Thrissur (GECT) is a 2-year, 4-semester postgraduate programme offered under the Production Engineering Department, affiliated to APJ Abdul Kalam Technological University (KTU). The programme has an approved intake of 18 seats and is offered in full-time on-campus mode. The total fees for the programme are approximately Rs. 40,220 for the entire 2-year duration, making it one of the most affordable M.Tech programmes in Kerala. Admission is through the MCAP (M.Tech Common Admission Process) conducted by the Directorate of Technical Education (DTE), Kerala, primarily based on GATE scores. The programme is designed for graduates in Mechanical, Production, or Industrial Engineering who wish to specialize in advanced manufacturing systems, production management, and operations management.

Admissions for the 2026-27 batch have been completed. For the 2027-28 batch, the MCAP process is expected to begin tentatively in May-June 2027, with admissions in July-August 2027. GATE 2027 was conducted on February 7, 8, 14, and 15, 2027, and results were declared on March 19, 2027. Candidates with valid GATE scores are eligible to apply. Non-GATE candidates may also be considered for spot admissions if seats remain vacant after the regular allotment process.

Key Points

Offered under the Production Engineering Department, focusing on advanced manufacturing systems, production management, and operations management
Admission is primarily through GATE scores via the MCAP (M.Tech Common Admission Process) by DTE Kerala
Non-GATE candidates may be considered for spot admissions if seats remain vacant
Affiliated to APJ Abdul Kalam Technological University (KTU)
Intake is limited to 18 seats, making it a highly specialized programme

Official Link:

Go To Website

Highlights
Fees
Admission
Scholarships
Ranking
FAQs

GECT M.Tech (Manufacturing & Management) Fees

The M.Tech (Manufacturing & Management) programme at GECT Thrissur is highly affordable as a government institution. The total fee for the entire 2-year programme is approximately Rs. 40,220 for general category students. SC/ST and OEC candidates are eligible for fee concessions as per government norms. Fees are paid semester-wise.

Fee Breakdown

Fee Component	Year 1 (Rs.)	Year 2 (Rs.)	Total (Rs.)
Tuition Fees	~11,085	~19,170	~30,255
Registration Fees	~1,000	-	~1,000
Examination Fees	~3,000	~6,000	~9,000
Total Academic Fees	~15,085	~25,170	~40,255
Hostel Fees (if availed)	Variable	Variable	1,080 - 4,430 per year
Total Fees (without hostel)	~15,085	~25,170	~40,255

Fees are approximate and subject to revision as per Government of Kerala and KTU orders.
SC/ST and OEC candidates are eligible for fee concession/waiver under government schemes.
Hostel fees are not mandatory; applicable only if the student opts for hostel accommodation.
Fees are paid semester-wise; no EMI option is available.

GECT M.Tech (Manufacturing & Management) Admission 2026

Admission to M.Tech (Manufacturing & Management) at GECT Thrissur is through the MCAP (M.Tech Common Admission Process) conducted by the Directorate of Technical Education (DTE), Kerala. Candidates with valid GATE scores are given priority. The 2026-27 admissions have been completed. For 2027-28, the MCAP process is expected to begin in May-June 2027, with admissions in July-August 2027. GATE 2027 results were declared on March 19, 2027.

College Admission Dates

Event	2026-27 (Actual/Reference)	2027-28 (Tentative)
MCAP Application Start	May 2026	May 2027
MCAP Application Last Date	June 2026	June 2027
Rank List / Merit List Publication	June-July 2026	June-July 2027
First Allotment & Joining	July 2026	July 2027
Second Allotment	July-August 2026	July-August 2027
Spot Admission (if seats vacant)	August 13, 2026	August 2027
Batch Commencement	August 2026	August 2027

Entrance Exam Dates

Exam	Conducting Body	Mode	2027 Dates
GATE 2027 (Graduate Aptitude Test in Engineering)	IIT Guwahati	Online (CBT)	Feb 7, 8, 14, 15, 2027
GATE 2027 Result	IIT Guwahati	-	March 19, 2027

GATE score is the primary criterion for M.Tech (Manufacturing & Management) admission at GECT Thrissur through MCAP. Relevant GATE papers include ME (Mechanical Engineering) and PI (Production and Industrial Engineering). Non-GATE candidates may be considered for spot admissions if seats remain vacant.

The dates mentioned above are tentative and subject to change.

Eligibility Criteria:

Bachelor's degree in Mechanical Engineering, Production Engineering, Industrial Engineering, or equivalent from a recognized university with minimum 50% marks (45% for reserved category candidates)
Valid GATE score (preferred); non-GATE candidates may be considered for spot admissions
Candidates must satisfy the eligibility norms as prescribed by KTU and DTE Kerala

Admission Process:

Appear for GATE 2027 (ME or PI paper) and obtain a valid score
Register for MCAP through the DTE Kerala portal during the application window
Submit application with GATE scorecard, academic documents, and other required certificates
Receive allotment through the MCAP process based on GATE rank and options submitted
Remit the prescribed fee and report to GECT Thrissur on the notified joining date with all original documents

GECT M.Tech (Manufacturing & Management) Scholarships 2026

Students admitted to M.Tech (Manufacturing & Management) at GECT Thrissur can avail various government scholarships. As a government institution with very affordable fees, students from economically weaker sections can benefit significantly from state and central government scholarship schemes.

Available Scholarships

Scholarship	Eligibility	Amount	Offered By
E-Grantz Scholarship	SC/ST/OEC and backward community students with annual family income below Rs. 1 lakh	Full tuition fee reimbursement (up to Rs. 15,000/year)	Government of Kerala
Post-Matric Scholarship (SC/ST)	SC/ST students	Full tuition fee + maintenance allowance	Government of India / State Government
Central Sector Scholarship	Top 20 percentile in 12th standard, family income below Rs. 8 lakh	Rs. 10,000/year (PG level)	Ministry of Education, Govt. of India
Merit Cum Means (MCM) Scholarship for Minorities	Minority community students with family income below Rs. 2.5 lakh	Up to Rs. 30,000/year	Ministry of Minority Affairs, Govt. of India
SAFE Scholarship (Alumni)	Financially backward students with good academic record	Rs. 10,000/year	GECT Alumni Association
Prime Minister's Scholarship	Wards of ex-servicemen/ex-coast guard personnel	Rs. 3,000/month (girls), Rs. 2,500/month (boys)	Ministry of Defence, Govt. of India

E-Grantz applications are submitted online through the Kerala government portal each academic year.
SC/ST students are eligible for fee concession at the time of allotment itself.
Scholarship amounts and eligibility criteria are subject to revision by the respective authorities.

GEC Thrissur M.Tech Manufacturing & Management Ranking

NIRF Ranking

#300 out of 300 in India 2024

#5th in Kerala

Do you think the Rankings are wrong ? Report Here

GECT M.Tech (Manufacturing & Management) FAQs

Ques. What is the focus of M.Tech (Manufacturing & Management) at GECT Thrissur?

Ans. The programme focuses on advanced manufacturing systems, production planning and control, operations management, quality management, and supply chain management. It combines technical manufacturing knowledge with management principles, preparing graduates for leadership roles in manufacturing industries.

Ques. Is GATE mandatory for M.Tech (Manufacturing & Management) admission at GECT Thrissur?

Ans. GATE score is the primary criterion for admission through the MCAP process. However, non-GATE candidates may be considered for spot admissions if seats remain vacant after the regular allotment. It is strongly recommended to have a valid GATE score for a better chance of admission.

Ques. Which GATE paper should I appear for M.Tech (Manufacturing & Management) at GECT Thrissur?

Ans. Candidates should appear for the ME (Mechanical Engineering) or PI (Production and Industrial Engineering) paper in GATE. Both papers are relevant for this programme. Candidates with B.Tech in Mechanical, Production, or Industrial Engineering are eligible.

Ques. What is the intake for M.Tech (Manufacturing & Management) at GECT Thrissur?

Ans. The approved intake for M.Tech (Manufacturing & Management) at GECT Thrissur is 18 seats. This is a small, specialized programme with limited seats.

Ques. What career opportunities are available after M.Tech (Manufacturing & Management) from GECT Thrissur?

Ans. Graduates can pursue careers in manufacturing companies, automotive industries, aerospace firms, and production management roles. They can work as production managers, manufacturing engineers, quality managers, supply chain managers, or operations managers. The programme also prepares graduates for research and academic careers.

Ques. Can B.Tech graduates from other engineering branches apply for M.Tech (Manufacturing & Management)?

Ans. Typically, candidates with B.Tech in Mechanical Engineering, Production Engineering, or Industrial Engineering are eligible. Candidates from other branches may be considered if they have relevant GATE scores. The specific eligibility criteria are published in the MCAP prospectus by DTE Kerala each year.