JSS Science and Technology University Mysore Ph.D Mechanical Engineering: Fees 2026, Course Duration, Dates, Eligibility

Mysore, KarnatakaPrivate UniversityEstd 1963NAAC Grade B++ 2.8
Collegedunia Team's profile photo

Collegedunia Team

Content Curator | J/hVSQ

The Ph.D. Mechanical Engineering at JSS Science and Technology University (JSSSTU), Mysuru is a research doctoral programme under the Department of Mechanical Engineering at JSSSTU. JSSSTU is a NAAC B++ accredited deemed university with active research across engineering, science, and management disciplines. Ph.D. admission is through the JSSSTU Research Entrance Test (RET) with exemptions for GATE, UGC-NET, CSIR-NET, and KSET qualified candidates.

📋 Admission Status: JSSSTU Ph.D. admissions are through the JSSSTU Research Entrance Test (RET) followed by an interview. Candidates holding valid GATE, UGC-NET, CSIR-NET, DBT-JRF, ICMR-JRF, ICAR, or KSET scores are exempt from RET. Applications open periodically. Check jssstuniv.in for current notification.


Key Points

  • NAAC B++ accredited JSSSTU. Doctoral research under experienced faculty.
  • Duration: Minimum 3 years (extendable up to 6 years as per UGC norms).
  • Annual Fee: INR 1,53,166 per year. Minimum total: INR 4,59,498.
  • Admission via JSSSTU RET and interview. NET/GATE/KSET/JRF holders exempt from RET.
  • Graduates pursue faculty, research scientist, and senior R&D roles.

JSSSTU Mysuru Ph.D. Mechanical Engineering Fees

ComponentAmount (INR)
Course DurationMinimum 3 Years (up to 6 Years)
Annual FeeINR 1,53,166 per year
Total Fees (Minimum 3 Years)INR 4,59,498
  • Annual fee applies throughout the doctoral programme (3 to 6 years).
  • Actual total fees depend on the approved research duration.
  • Verify current fees and any additional charges at jssstuniv.in.

JSSSTU Mysuru Ph.D. Mechanical Engineering Admission 2026

Important Dates

EventDate
JSSSTU Ph.D. Admission NotificationPeriodic (check jssstuniv.in)
Application SubmissionAs per notification (Tentative)
JSSSTU RET (if applicable)As per notification (Tentative)
InterviewAs per notification (Tentative)
Admission and EnrolmentAugust 2026 (Tentative)
JSSSTU RET Registration EndAs per notification
JSSSTU RET Exam DateAs per notification
JSSSTU RET ResultAs per notification
  • NET/GATE/KSET/JRF holders are exempt from the JSSSTU RET.
  • All candidates must appear for the interview before final admission.
  • Check jssstuniv.in for current Ph.D. admission notification and dates.

The dates mentioned above are tentative and subject to change.

Eligibility Criteria

  • M.e. or m.tech in mechanical engineering or a closely related mechanical discipline with minimum 55 percent aggregate marks (50% for reserved categories).
  • Candidates must clear the JSSSTU RET or hold a qualifying exemption score.
  • Final shortlisting is based on the RET/exemption score and interview performance.

Admission Process

  • Watch for the JSSSTU Ph.D. admission notification at jssstuniv.in.
  • Submit the online application with academic documents and research proposal.
  • Appear for the JSSSTU RET (or submit qualifying exam scorecard for exemption).
  • Attend the research interview before the Ph.D. admission committee.
  • Receive the admission offer and pay the first-year fee.
  • Register as a doctoral scholar and formalise supervisor and topic registration.

✓ Opt for this if

  • Mechanical engineering postgraduates targeting research or faculty careers
  • M.Tech Mechanical graduates seeking doctoral research at a UGC-recognised institution
  • GATE or UGC-NET qualified candidates in mechanical engineering
  • Researchers aiming for roles at ISRO, HAL, DRDO, or automotive R&D departments
  • Karnataka-based candidates seeking affordable doctoral education at JSSSTU Mysuru

✗ Skip if

  • Students preferring taught PG programmes over long-duration doctoral research
  • Candidates needing IIT or NIT brand for high-impact research or elite faculty roles
  • Those targeting IT, software, or management careers
  • Students without a relevant master degree in mechanical or thermal engineering

JSSSTU Mysuru Ph.D. Mechanical Engineering Scholarships 2026

ScholarshipAmountEligibility
Vidyasiri Scholarship (Karnataka)INR 20,000 to INR 50,000 per yearKarnataka-domicile SC/ST/OBC students. Apply via ssp.postmatric.karnataka.gov.in
NSP Post-Matric Scholarship (Central)As per NSP normsSC/ST/OBC/Minority students. Apply via scholarships.gov.in
Karnataka Minority ScholarshipPartial fee supportMinority community students from Karnataka. Apply via state portal
JSSSTU Merit ScholarshipPartial fee waiverOutstanding academic performers. Contact JSSSTU admissions office
  • Apply to government scholarships within 30 days of admission confirmation.
  • State and central scholarship portals have fixed application windows.
  • Contact the JSSSTU scholarship cell for internal awards and updated criteria.

Table of Contents

JSSSTU Mysuru Ph.D. Mechanical Engineering FAQs

Ques. What is the fee for Ph.D. Mechanical Engineering at JSSSTU Mysuru?

Ans. The Ph.D. Mechanical Engineering at JSSSTU Mysuru has an annual fee of INR 1,53,166 per year. The minimum programme duration is 3 years, making the minimum total INR 4,59,498. The duration can extend up to 6 years as per UGC doctoral regulations. Verify current fees at jssstuniv.in.

Ques. What is the admission process for Ph.D. at JSSSTU?

Ans. Ph.D. admission at JSSSTU is through the JSSSTU Research Entrance Test (RET) followed by an interview. Candidates with valid GATE, UGC-NET, CSIR-NET, DBT-JRF, ICMR-JRF, ICAR, or KSET scores are exempt from the RET but must still attend the interview. Notifications are published periodically on jssstuniv.in.

Ques. What is the eligibility for Ph.D. Mechanical Engineering at JSSSTU?

Ans. Candidates must hold M.E. or M.Tech in Mechanical Engineering or a closely related mechanical discipline with minimum 55 percent aggregate marks. A 5 percent relaxation applies for reserved category candidates. All candidates are shortlisted based on RET performance or qualifying exam score followed by a research interview.

Ques. What career options are available after a Ph.D. from JSSSTU?

Ans. Ph.D. graduates can pursue careers as research faculty, R&D engineers, design engineers, and senior engineers at academic institutions, ISRO, DRDO, HAL, automotive OEMs, aerospace companies, and heavy engineering firms. A doctoral degree from a UGC-recognised institution qualifies holders for academic faculty positions under UGC norms and for senior research roles in government labs, PSUs, and industry R&D departments.

Ques. What does the Ph.D. Mechanical Engineering programme cover at JSSSTU?

Ans. The doctoral programme involves original research in thermal engineering, manufacturing technology, CAD/CAM, robotics and mechatronics, finite element analysis, materials characterisation, advanced manufacturing processes, and experimental mechanics. Scholars complete coursework in the first year, followed by research under an assigned supervisor, culminating in a thesis submitted for external evaluation.

Ques. How long does a Ph.D. take at JSSSTU?

Ans. The minimum duration for a Ph.D. at JSSSTU is 3 years from the date of enrolment, in line with UGC regulations. The maximum permitted duration is 6 years with scope for extension under special circumstances as per university and UGC guidelines. Part-time Ph.D. options may be available for working professionals. confirm with JSSSTU’s research office.

Course Finder

Search from 20K+ Courses and 35+ Streams

Clear

Comments


No Comments To Show