Bachelor of Engineering [B.Eng] [Materials Science and Engineering] From Queen Mary, University of London

Queen Mary, University of London Materials Science and Engineering BEng (Bachelor of Engineering with Honours) is a three-year, full-time, on-campus degree at Mile End in London. The September 2027 intake requires ABB at A level, including at least two of Mathematics, Physics or Chemistry. Indian equivalents are 75% CBSE or ISC, 70% West Bengal or 80% other boards. September 2027 tuition is unpublished; 2026-27 overseas tuition was GBP 32,950 (INR 43.01 Lakhs) per year, as a prior-cycle reference.

The course combines mechanics, chemistry, materials processing and mathematical modelling with laboratory work, computation and engineering design. Its final-year Integrated Design Project and options in biomedical, sustainable, aerospace and electrochemical materials suit applicants who enjoy science that becomes a physical or industrial solution. Unlike the four-year industrial option, J511 has no built-in placement year, so it suits students who will arrange workplace exposure separately.

• Core modules move from engineering design and experimental practice to sustainability, phase transformations and materials processing.
• Mile End teaching uses materials characterisation, mechanical testing, wet chemistry, nanotechnology and computer modelling facilities.
• The degree is accredited by the Institute of Materials, Minerals and Mining for the academic requirement toward Chartered Engineer registration.

Also Check: Queen Mary undergraduate admission

Queen Mary Materials Science Fees and Living Costs 2027

September 2027 overseas tuition is unpublished for J511 on the live Queen Mary course page. The page confirms that 2027-28 fees have not been set. The 2026-27 amount below is a prior-cycle planning reference, not a target fee; verify the update on the official 2027 course page.

Queen Mary also requires overseas students who need a Student visa to pay a GBP 2,000 (INR 2.61 Lakhs) tuition deposit before visa sponsorship paperwork is issued. The deposit is credited toward tuition, so it affects cash flow but is not an extra fee.

Fee status: The table uses the 2026-27 overseas rate as a clearly labelled prior-cycle reference because the target-cycle amount is not yet published.

All INR conversions in the article use a conversion rate of GBP 1 = INR 130.52 as of 23 August 2026. Rates fluctuate daily, verify before applying.

• Do not treat the 2026-27 figure as a confirmed 2027 cost, because Queen Mary has not published the new overseas rate.
• Use the deposit as an upfront cash-flow requirement, then subtract it from the fee balance rather than adding it to tuition.
• Queen Mary invoices the academic year before enrolment and allows instalment arrangements when fees exceed GBP 1,000 (INR 1.31 Lakhs), so read the offer and invoice together.

Cost of Living in London for Materials Science Students

Queen Mary’s latest published London estimate is GBP 1,334 (INR 1.74 Lakhs) per month including housing, food and travel. That equals a calculated GBP 16,008 (INR 20.89 Lakhs) for twelve months. Residential fees were GBP 172 to GBP 430 (INR 22,449 to INR 56,124) per week in 2025-26.

A prior-cycle planning illustration combines three-year tuition of GBP 98,850 (INR 1.29 Crore). It adds three years of living costs of GBP 48,024 (INR 62.68 Lakhs), producing GBP 146,874 (INR 1.92 Crore). It excludes visa costs, health charges, travel, insurance and future fee changes.

Check Out: UK accommodation and living costs

Key insight: The 2027 fee is the largest unresolved cost, so use the prior-cycle illustration only to test affordability and wait for the official rate before accepting an offer.

Queen Mary Materials Science Admission 2027

Direct entry requires ABB at A level with at least two subjects among Mathematics, Physics or Chemistry. For Indian Standard XII applicants, Queen Mary’s published equivalence is 75% CBSE or ISC, 70% West Bengal or 80% other boards, although actual offers may differ slightly.

GCSE (General Certificate of Secondary Education) English and Mathematics at grade C or 4, or an accepted equivalent, are also required. The academic profile therefore combines a broad science base with evidence that you can manage quantitative engineering study.

Academic eligibility: The table focuses on the regular three-year J511 route, not the foundation, industrial experience or Master of Engineering variants.

The subject condition matters because a high overall percentage cannot replace the required science combination. Applicants below direct-entry preparation can investigate Queen Mary’s one-year International Science and Engineering Foundation Programme, which offers progression subject to its requirements.

Materials Science and Engineering uses laboratory practicals, computational modelling and design work from the first year. Applicants should therefore show preparation in mathematics and physical science rather than presenting the course as a general engineering degree.

English Language Requirements for Materials Science

The course uses Band 3 in Queen Mary’s English framework. Accepted routes include IELTS (International English Language Testing System) Academic and TOEFL (Test of English as a Foreign Language) iBT. PTE (Pearson Test of English) is another accepted route, alongside selected Indian school-English qualifications.

Each route has its own scale and component rules, so a score from one test cannot be converted into another. The target-cycle policy below preserves Queen Mary’s current TOEFL scales and effective date.

• Book IELTS Academic or the current TOEFL scale early enough to retake a component without missing the 13 January 2027 application deadline.
• Use the CBSE or ISC English route only when the certificate and component mark meet the published Band 3 rule.
• Check test validity against the September 2027 start date, because Queen Mary applies different validity periods to tests and school qualifications.

Tip for Indian students: Treat the science-subject condition and English component minimum as separate checks, then match each certificate to the J511 application before submission.

Queen Mary Materials Science Application 2027

J511 applications go through UCAS (Universities and Colleges Admissions Service), using Queen Mary’s institution code Q50 and the course code J511. UCAS is the central undergraduate application route for this programme. The regular route has one published start in September 2027, and completed applications can be submitted from 1 September 2026.

The equal-consideration deadline is 13 January 2027 at 18:00 UK time, or 23:30 IST. The 2027 UCAS application fee is GBP 34.50 (INR 4,503) for up to five choices, while eligible fee-waiver applicants should check the current waiver conditions.

Application timeline: The table lists forward-looking 2027 stages and gives Indian applicants the local conversion where the UK portal publishes a cutoff time.

For Indian applicants, the safest stage is the January equal-consideration round because it leaves time for an offer, finances and visa preparation. Queen Mary warns that the course code may not be changeable later, so select J511 rather than the industrial experience code JM11 or the year-abroad code J51Y.

• Complete the academic reference, Standard XII details and English evidence before the January cutoff.
• Use the personal statement to connect mathematics, physical science, materials interest and the course’s design-project emphasis.
• Confirm the course code on the submitted form because the industrial experience and year-abroad routes have separate four-year codes.

Read More: UCAS undergraduate application guide

Application tip: Submit the correct J511 choice in the January round, because the separate industrial and year-abroad routes change duration and the practical experience available.

Queen Mary Materials Science Scholarships 2027

2027-28 scholarship terms are unpublished on the checked Queen Mary funding surfaces. The relevant routes below are therefore a prior-cycle merit reference and a current published cycleless award, not guaranteed target-cycle funding.

For a direct J511 applicant, the Global Talent Scholarship is the main international merit route found, while the Children of Alumni Award is restricted by family and fee-status conditions. Check the official undergraduate scholarship listing when the 2027 terms are released.

Funding status: Do not reduce the unpublished 2027 tuition by a prior-cycle award, and do not assume a foundation-only scholarship applies to direct entry.

• Keep the full unpublished tuition in your funding plan until Queen Mary confirms the 2027-28 rate and scholarship terms.
• Use the prior-cycle Global Talent criteria as a preparation benchmark, not as evidence that a September 2027 award will be available.
• Flag a parent’s Queen Mary alumni status before enrolment if you may qualify for the Children of Alumni Award.

Check Out: UK scholarships and financial support

Scholarship reality: A prior-cycle merit award can guide preparation but cannot create a target-cycle net fee. Secure a gross-fee plan and add funding only after written confirmation.

Queen Mary Materials Science Salary 2027

The prior-cycle planning illustration for three years of tuition and London living costs is GBP 146,874 (INR 1.92 Crore). It excludes visa costs, health charges, travel, insurance and any future change in the unpublished 2027 fee.

Course-specific salary and employment outcomes are not published with enough detail to establish a J511 graduate result. The official evidence instead provides a clearly labelled Queen Mary Engineering and technology proxy plus course-specific curriculum and accreditation evidence.

ROI for Indian Applicants

The course’s financial case depends on whether its materials training supports the applicant’s intended engineering pathway after graduation. Use the following evidence to test cost, experience and work-route assumptions together.

• Course-specific evidence: the exact J511 salary series is unpublished because Discover Uni lacked enough course-specific data, so use the benchmark only to stress-test financing.
• School-level salary benchmark: Queen Mary Engineering and technology graduates recorded GBP 30,000 (INR 39.16 Lakhs) median after 15 months, so compare gross pay with your funding assumption.
• Employment proxy: 90% of ten students from other Materials and technology courses were in work or study after 15 months, so treat it as directional and small-sample evidence.
• Professional path: IOM3 (Institute of Materials, Minerals and Mining) accreditation covers the academic requirement toward Chartered Engineer registration, so verify the remaining steps for your intended UK or India pathway.
• Experience tradeoff: J511 has no built-in placement year, while Queen Mary’s four-year JM11 route has competitive placements, so decide whether extra time is worth pursuing.

Salary and Employment Evidence

Because no standalone salary series is published, the table separates the school-level proxy from the course’s own evidence gap. These are gross nominal earnings and are not a promise of individual pay.

Source: Discover Uni course data and Queen Mary career information; the salary rows are school-level proxies, not exact J511 outcomes.

Queen Mary lists recent graduate employers including Accenture, Capgemini, Jacobs, Airbus, GSK, Roche and Siemens Healthineers, alongside roles such as Materials Graduate Engineer, Graduate Project Engineer and Technical Consultant. The list shows reported employer presence, not a recruitment guarantee or a typical outcome for this BEng.

Gross salary figures do not equal take-home pay because tax and pension deductions vary. Use a current UK tax calculator before comparing a UK salary with an India-return plan.

ROI reality: The course offers a specific materials curriculum and professional accreditation. Its salary evidence is a school-level proxy, so secure funding without treating the benchmark as payback proof.

UK Visa for Queen Mary Materials Science Students 2027

An Indian student joining in September 2027 normally needs a UK Student visa costing GBP 558 (INR 72,830). The visa also carries an IHS (Immigration Health Surcharge) of GBP 776 (INR 1.01 Lakhs) per year. The IHS provides healthcare access but remains separate from tuition and living costs. London maintenance evidence is GBP 1,529 (INR 2.00 Lakhs) per month for up to nine months, or GBP 13,761 (INR 17.96 Lakhs). Verify current figures and conditions on the official Student visa guidance before submitting.

• For applications from 1 January 2027, the 18-month Graduate Route costs GBP 937 (INR 1.22 Lakhs) plus GBP 1,552.50 (INR 2.03 Lakhs) for its IHS.
• Skilled Worker sponsorship uses a standard salary threshold of GBP 41,700 (INR 54.43 Lakhs), while settlement generally requires five qualifying years.
• Undergraduate dependants are generally restricted, although a government-sponsored exception may apply, so verify family eligibility before accepting an offer.
• Students can usually work up to 20 hours per week during term, but that limit should not replace tuition funding or required maintenance evidence.

Check Out: UK Student visa application guide

Visa reality: The 18-month Graduate Route creates a defined post-study window, not a job guarantee. Keep the visa budget separate and test sponsorship prospects before relying on UK employment.

Queen Mary Materials Science Ranking 2027

Queen Mary’s 2027 course page reports a top 10 in the UK position for Materials Science in the QS World University Rankings by Subject 2026. This is the relevant published ranking because it matches the discipline rather than relying on an overall university position.

The result describes the materials department and course subject context, not a separately ranked J511 BEng. Use it to assess the academic environment alongside the curriculum, laboratory access and professional accreditation.

Ranking scope: The table records the published edition and scope so the result is not mistaken for a graduate outcome or course-specific placement measure.

The ranking supports the course’s subject proposition, but it does not establish selectivity, salary or employment probability. Indian applicants should connect the ranking with the published modules, laboratory access and the absence of a built-in placement year.

Honest take: The Materials Science subject ranking is relevant academic context. The decision still turns on the unpublished 2027 fee, J511’s three-year structure and your plan for workplace experience.