Bachelor [Design, Innovation and Creative Engineering] From Queen Mary, University of London

Queen Mary, University of London Bachelor Design, Innovation and Creative Engineering is a three year, full time, on campus Bachelor of Engineering (BEng (Hons)) at Mile End for September 2027. Direct entry needs AAB at A-Level including Mathematics or Physics, with Indian equivalents of 80% for National Board schools, 75% for West Bengal and 85% for other boards. September 2027 tuition is unpublished; 2026-27 tuition was £32,950 per year (INR 43.02 Lakhs), as a prior-cycle reference.

The course trains students to frame human problems, test ideas through studio practice and connect creative design with engineering analysis, materials and digital modelling. That mix suits applicants who can show creative initiative alongside quantitative readiness, although its project work demands sustained presentations, teamwork and independent study.

• Its BEng (Hons) is accredited by the Institution of Engineering Designers as partially meeting academic requirements for Chartered Engineer registration and fully meeting requirements for Registered Product Designer registration.
• The separate Industrial Experience and Year Abroad BEng routes extend study to four years and use different UCAS codes from the standard three-year route.
• Mile End learning resources include a Design Studio, Makerspace workshop, mechanical testing facilities and computational labs.

Also Check: Queen Mary creative engineering admission

Queen Mary Creative Engineering Fees and Living Costs 2027

For September 2027, Queen Mary has not published overseas tuition for the standard BEng. The last official course page lists 2026-27 overseas tuition at £32,950 per year (INR 43.02 Lakhs) as a prior-cycle reference. Verify the target fee on the official fee page.

Fee context: The tuition row is a 2026-27 prior-cycle reference, while the application fee is confirmed for the 2027 UCAS cycle.

All INR conversions in the article use a conversion rate of GBP 1 = INR 130.55 as of 22 August 2026. Rates fluctuate daily, verify before applying.

Source: Queen Mary 2027 and 2026 course pages and UCAS 2027 application-fee information.

The 2027 fee gap is material because the prior-cycle annual amount cannot set a fixed three-year budget. The UCAS fee covers up to five choices, so it is an application cost rather than a Queen Mary deposit. Queen Mary’s checked target pages did not publish an international deposit or payment schedule, so those items are excluded.

A prior-cycle planning illustration uses £32,950 x 3 years = £98,850 (INR 1.29 Crore) for tuition only. The official London student-cost proxy adds £16,250 to £16,530 (INR 21.21 to INR 21.58 Lakhs) for nine months. Together, the illustration produces £115,100 to £115,380 (INR 1.50 to INR 1.51 Crore), before visa costs, health surcharge and future fee changes.

Cost of Living in London for Creative Engineering Students

Queen Mary’s own budget workbook was not readable during the 22 August 2026 check, so this article uses an official Imperial College London student-cost proxy for planning. The proxy is separate from Queen Mary’s accommodation quote and from the Student visa maintenance requirement.

Source: Queen Mary accommodation page and the official London student-cost proxy checked for this article.

Queen Mary’s halls start from around £170 per week (INR 22,194) for a non-ensuite room. That figure is a residence starting point, not a complete London budget, so food, travel, materials and personal costs still need separate funding.

The visa maintenance figure is a financial-evidence threshold rather than a promise that London living will cost that amount. Use the nine-month proxy to test family funding or loan capacity, then add a separate reserve for course materials and travel.

Key insight: London adds a major cost after tuition, while the target fee remains unpublished. Indian applicants should fund against a range, not one prior-cycle figure.

Queen Mary Creative Engineering Admission 2027

The direct-entry BEng requires AAB including Maths or Physics, and the course expects evidence of creativity when no additional creative A-Level is offered. Queen Mary’s India table maps AAB to 80% for CBSE or ISC, 75% for West Bengal and 85% for other boards, although actual offers may differ slightly. CBSE means Central Board of Secondary Education, while ISC means Council for the Indian School Certificate Examinations.

The table below separates Queen Mary’s academic thresholds from the Indian interpretation that matters for a direct-entry applicant.

The creative-evidence condition is important because strong marks alone do not show how you observe users, form ideas or test design choices. Build a small evidence trail around one or two projects, then connect each project to the course’s engineering and human-centred focus.

English Language Requirements

Queen Mary’s School of Engineering and Materials Science assigns this course Band 3, with IELTS (International English Language Testing System) 6.0 overall and 5.5 in each component.

TOEFL (Test of English as a Foreign Language) uses a new 1 to 6 scale or legacy 0 to 120 scale. PTE (Pearson Test of English) reports overall and component scores.

Use the accepted English-test rules when booking because validity, test version and verification requirements affect whether a score can support enrolment.

• Schedule an IELTS, PTE or TOEFL attempt around the two-year validity window so the score remains usable for September 2027 entry.
• Check your board before booking a test because 60% CBSE or ISC English and 65% from selected State Boards can satisfy Band 3 under the published conditions.
• Choose the TOEFL scale deliberately because Queen Mary publishes separate post-21 January 2026 and legacy score rules.

Academic fit is broader than meeting a grade line because the course asks students to connect engineering analysis with creative evidence. The latest detailed official curriculum available for the preceding cycle includes Studio Practice, Computational and Mathematical Modelling and Materials Engineering. It also includes Data and Design, Robotics, Sustainable Manufacture and a final-year design project. Use the 2027 course page as the authority if modules change before enrolment.

Read More: Queen Mary University of London course profile

Tip for Indian students: Treat AAB as both an academic threshold and a creative-fit screen, then preserve a valid Band 3 English route before submitting the UCAS application.

Queen Mary Creative Engineering Application 2027

Applications for September 2027 are announced, but completed UCAS submissions open on 1 September 2026. The main international deadline is 13 January 2027 at 18:00 UK time / 23:30 IST, and the standard course has one September intake.

The dates below are for the target 2027 cycle, with Indian Standard Time shown beside the published UK cutoff where a time is available.

The standard three-year BEng uses UCAS code 4A33 and Queen Mary’s institution code Q50. The Industrial Experience and Year Abroad routes use different codes, so selecting the wrong variant can change the duration and study plan.

• Use the personal statement to connect a design problem, your creative activity and your Mathematics or Physics preparation to the course’s human-centred engineering proposition.
• Submit qualification details accurately because Queen Mary’s Indian equivalence varies by CBSE or ISC, West Bengal and other boards.
• Keep a dated copy of every application document because the January deadline governs equal consideration while later routes depend on remaining places.

For this programme, an early complete submission is more useful than a late application based only on the general UCAS final date. Prepare the creative evidence and English result together because both support the course-fit decision even when the portal submission itself is the immediate task.

Read More: UCAS application stages for UK study

Application tip: Select code 4A33, prepare the creative evidence before 1 September 2026 and treat 13 January 2027 at 23:30 IST as the operational submission cutoff.

Queen Mary Creative Engineering Scholarships 2027

September 2027 scholarship amounts and deadlines are not published on the checked current finder. Queen Mary states that international students may be eligible for fee reductions and subject-specific funding, but the target award conditions are not confirmed.

Prior-cycle context: The following awards were listed for September 2026, so they are useful for route planning only and must not be deducted from the September 2027 budget.

Source: Queen Mary undergraduate scholarship finder checked for the 2027 cycle.

The Global Talent award is the closest prior-cycle match for a direct-entry international applicant, while the Foundation and Kaplan awards depend on a different preparation route. That distinction matters because a scholarship headline does not automatically reduce the cost of the standard three-year BEng.

• Keep the full target-cycle tuition and London living budget available until a September 2027 award is named in writing.
• Apply through the route specified by the award because offer-holder consideration, foundation progression and pathway progression are different eligibility conditions.
• Record each award’s nationality, academic and acceptance conditions beside the deadline when the 2027 finder is updated.

Queen Mary’s general funding statement indicates that international fee reductions exist, yet it does not establish a target-cycle award for this course. Indian applicants should therefore treat scholarships as a funding upside and make the primary decision using the verified fee status and cost range.

Check Out: UK scholarships for international students

Scholarship reality: The strongest prior-cycle direct-entry match was cycle-specific. Fund the published cost range first, then treat any 2027 award as unconfirmed until formally listed.

Queen Mary Creative Engineering Salary 2027

Queen Mary’s exact course data reports 85% in work or study 15 months after the course. The data covers 15 students and a 65% response rate for graduates from 2021-23. This is course-level activity evidence, not a placement rate, and the published page does not provide a course-specific salary.

The nearest salary evidence comes from broader Queen Mary subject groups, so the figures below indicate market context rather than a typical Design, Innovation and Creative Engineering graduate outcome.

Salary Benchmarks by Published Scope

The official Discover Uni page publishes salary figures for broader Queen Mary course groups because the exact course is new. The latest comparable cohort is graduates from 2022-23, measured 15 months after graduation.

Source: Discover Uni course-level activity, student experience and broader subject-group salary data for Queen Mary.

The Engineering benchmark is higher than the broader Design benchmark, but neither is a course-specific salary promise. The difference reflects the wider subject groups, response sizes and role mix, so use the project portfolio and intended role as the closer fit test.

For ROI (return on investment), the prior-cycle illustration used £98,850 (INR 1.29 Crore) tuition. It added £16,250 to £16,530 (INR 21.21 to INR 21.58 Lakhs) for nine months of living, before visa costs. This is a funding stress test, not a payback forecast.

• The course-level result is 85% in work or study after 15 months from 15 students; request current role evidence, not a placement guarantee.
• The school-level Engineering median is £30,000 (INR 39.17 Lakhs) gross after 15 months; model tax, rent and location before using it in a repayment plan.
• The Graduate visa lasts 18 months for applications from 1 January 2027, so target eligible roles and sponsorship options before that window closes.
• Because 2027 scholarships are unpublished, arrange primary funding first and treat any later award as a reduction only after written confirmation.
• For India-return plans, test the course’s portfolio and project evidence against target roles before choosing a loan based on UK gross salary benchmarks.

Take-home pay varies with tax, pension, location and role, so use a current UK tax calculator before comparing any gross figure with loan payments. The course’s accreditation and project evidence may support further study or role applications, but they do not guarantee a host-country job.

ROI reality: Course-specific salary is unavailable, so fund the unpublished fee and judge the portfolio against a specific role plan.

UK Visa for Queen Mary Creative Engineering Students 2027

The three-year BEng normally requires a UK Student visa for Indian students. The current application fee is £558 (INR 72,847), plus IHS (Immigration Health Surcharge) of £776 per year (INR 1.01 Lakhs). The surcharge is separate from tuition and living costs, so include it in the funding schedule.

Indian applicants must show the London maintenance requirement of £1,529 per month (INR 2.00 Lakhs) for up to nine months. That totals £13,761 (INR 17.96 Lakhs). This is a visa evidence threshold, not actual living costs; check the current UK Student visa requirements before applying.

• The Graduate Route lasts 18 months from 1 January 2027, with a £937 fee (INR 1.22 Lakhs) and £1,035 annual IHS (INR 1.35 Lakhs).
• A Skilled Worker route normally requires an eligible sponsored job paying at least £41,700 (INR 54.44 Lakhs) or the applicable going rate, whichever is higher.
• Indefinite leave to remain may be available after five qualifying years on a qualifying route, but Student and Graduate status do not create automatic settlement.
• Undergraduate Student visa dependants are generally restricted, although a government-sponsored exception may apply and Graduate Route dependants can apply when eligible.

The 18-month Graduate Route window gives a course graduate time to seek work, but the later Skilled Worker threshold and occupation rules make role selection important. Students targeting product design, user experience or mechatronics should check sponsorship relevance before treating post-study work as a repayment assumption.

Check Out: UK Graduate Route visa information

Visa reality: The 18-month post-study window does not replace a separate living budget or a role plan that meets Skilled Worker conditions.