Get Answers on Test Preparation, Admissions & Campus Life
Selected Filters
College
Course
Substream
Study Abroad Countries
Which laptop is required for an IIT Kharagpur mechanical dual degree student?
Every Mechanical Engineering student requires high-speed, smooth, and multipurpose laptops to tackle the complications in the course. Your laptop should be efficient enough to do high-speed work and fulfill all requirements since a major part of your study is based on PDFs and online assignments. You require systems that can handle heavy project loads in programs designed for 3D environments and video rendering.
- Processor: Applications required are basically CPU exhaustive. They have to load huge databases to set up the workstation, and a light processor will make you wait a lot. More precisely, the best choice is i5-6300HQ/i7-6500U. If you are looking for a high-end CPU, go for 7-6700HQ or even i7-6820HK.
- RAM: A high-end processor is useless unless the memory is not sufficient. A high RAM is needed to perform everyday tasks, and if your memory is low, your processor won’t perform as well as it could. A minimum of 8 GB RAM is recommended and the most ideal is 16 GB.
- GPU: Operating heavy programs require excellent speed and resolution. Especially programs like MATLAB and CAD are used for 3D environments and video rendering, and a normal laptop will not be sufficient. Thus you should be choosing from Nvidia GTX 960M, 1050, and 1050 ti.
- Storage: The ideal storage I would recommend should be around 1Tb hdd. SSD is another option but not budget-friendly.
While one can compromise on storage, a Mechanical Engineer’s laptop is expected to have excellent memory, CPU, and graphics that will run heavy programs smoothly.
What is your review of mechanical engineering in NIT Jalandhar?
Mechanical Engineering at NIT Jalandhar is not for non-interested students. It’s one of the most feared branches at NIT Jalandhar. But it has a lot of pros that weigh out its cons.
Pros:
-
Good placement opportunities
-
Decent exposure
-
Well equipped labs
-
Experienced faculty
-
They prepare you for the hardships unlike other branches
The only major drawback is its very strict faculty. The marking pattern is also very rigid. The level of difficulty is higher than that of JEE Advance. But in the long run, this drawback actually becomes a blessing in disguise. You actually gain a lot of knowledge and opportunities to improve yourself as a whole.
Which is better for a B.Tech/B.E. in mechanical engineering: Aligarh Muslim University or Jamia Millia Islamia?
Mechanical engineering is the broadest discipline itself and it is good at both Aligarh Muslim University (AMU) and Jamia Milia Islamia (JMI). For the research perspectives in any specialized subjects of mechanical engineering, AMU is quite good and for exposure or entrepreneurship, JMI is the better option having 10th NIRF rank among Indian colleges.
Course Highlight
|
Course Name |
B.Tech/B.E. in mechanical engineering |
|
|
Duration |
4 years |
|
|
Exam Type |
Semester |
|
|
JMI |
AMU |
|
|
Course fee |
16,150 per year |
2.55 lakhs per year |
|
Average salary package per year |
5-10 lakhs |
4- 5 lakhs |
|
Companies coming to hire |
Siemens, ACC, Lurgi, Cummins India,TCS denso, Maruti Suzuki etc. |
Cummins India, Lurgi IN, Bharat electronics, IFFCO Dubai, etc. |
These are the aspects of mechanical engineering at both the colleges;
Faculty
AMU has about 50 faculty members whereas JMI has 25-30 faculty members. All the faculty members of both the colleges hold Ph.D. degrees and are well-experienced.
Laboratory
There are around 20 labs (4 : fluid mechanics, 6 : thermal engineering, 4: machine designing lab, and 8: industrial production) at AMU and 19 at JMI.
Placement
JMI is much better than AMU at placement record, they offer an average salary package of 5-10 lakhs per annum. Companies like Siemens India, Cummins, Maruti Suzuki India Limitedlimited, Mahindra, and Mahindra, etc. visit the campus for placements through placement.
The following graph shows a comparison between Jamia Millia Islamia and Aligarh Muslim University based on their ratings:
Where should I go, IIT Patna for chemical or Jadavpur University for mechanical?
Both IIT Patna and Jadavpur University are well-reputed institutes in India, and they offer effective classes and a resourceful atmosphere to the students.
There are some unique factors that distinguish both institutes from each other, which are listed below
- Infrastructure – IIT Patna is known for its world-class infrastructure, high-quality research labs, good campus, and excellent academics. The infrastructure of Jadavpur University is not up to par when compared with the IIT Patna.
- Faculty - IIT Patna has more efficient and experienced faculties in all departments than Jadavpur University. They are always available to the students to clear their doubts and give proper guidance.
- Placements: The highest package for IIT Patna was recorded to be 82.05 LPA while Jadavpur University received only 1.8 LPA.
You can opt for IIT Patna to excel in the field of chemical engineering
Which is better, mechanical in BIT DURG or mining at NIT Raipur?
The students can get better placement in NIT Raipur. One will get good opportunities and exposure in the mining branch too. Moreover, the experience at NIT is far better than BIT DURG.
- The curriculum followed by BIT DURG and even NIT Raipur is outdated.
- The institute is at least 10 years behind the current industry practice as compared to NIT Raipur.
- At least 30 years behind if we compare it with the US or European schools.
- The industry clientele had taken leaps and bounds in terms of technology and what the students study is old-era theories that have little relevance in practice now.
- Many industries hire graduates through campus interviews, 1st train them for 3 to 6 months to prepare the students as per industry requirements and update the knowledge.
The table shows a brief overview of the institutions:
|
Particulars |
NIT Raipur |
BIT DURG |
|
Median Salary |
Rs. 9.5 lakhs |
Rs. 6.5 lakhs |
|
Highest Salary |
Rs. 33 lakhs |
Rs. 32 lakhs |
|
Entrance Criteria |
JEE Mains |
CPET |
|
Fees |
Rs. 5.52 lakhs |
Rs. 2.92 lakhs |
So overall, if the students are into mechanical or mining, don't rely too much on what the book taught you, be aware of current trends and practices.
Which branch is better at Thapar University - mechanical or computer science?
When deciding on a branch of engineering, it is important to consider the long-term prospects of the field and the policies of the university offering it. Here are some points to keep in mind while choosing a stream:
- While some may argue that mechanical engineering is better than newer branches, it is important to keep in mind that every branch of engineering has its own set of advantages and opportunities.
- Thapar University is a private institution that may prioritize profits over student interests. As such, it is important to consider the policies they set in place to make money.
- Certain branches of engineering, such as mechatronics and robotics, may be kept to earn more profits, as they may charge an extra 10k in addition to other expenses associated with these streams.
- It is also important to consider the job prospects in your chosen field. Some companies may not offer jobs to those in certain branches of engineering, which can impact your career prospects.
- It is advisable to do thorough research before choosing a branch of engineering. Speaking with current students and alumni can provide valuable insight into the field and the university.
- One should also keep in mind that switching branches may be an option. If, like a friend of the speaker, you find that your chosen branch is not a good fit for you, it may be possible to switch to another branch, such as computer engineering.
In conclusion, choosing a branch of engineering should be a well-thought-out decision, taking into consideration the long-term prospects, policies of the university, and job opportunities in the field. Doing proper research can help ensure that you make an informed decision that is right for you.
How is IIT Mandi CS vs. IIT Roorkee for mechanical?
The IIT Mandi CSE program is relatively new and is still gaining recognition. However, the faculty and facilities for CSE at IT Mandy are brilliant. IIT Roorkee's ME program is well-regarded and is considered to be one of the best in the country. Both institutes enjoy a good reputation, but IIT Roorkee has a more established mechanical engineering program. The suitability of the program depends on your interests and preferences.
The CS program at IIT Mandi is great. IIT Mandi has a good coding environment in addition to several GSoC selections every year. You will see active participation of students in coding competitions right from the first year.
It’s better to explore both branches ME and CSE and then after analyzing your interest,
You should explore your interest in both mechanical and CS as the branch is the most crucial determining factor of your career. This is because CS might not seem easy to those who lack interest in the same.
It would be best for you to visit the websites of both institutes and compare the program details, faculty, research, and facilities to decide which one would be a better fit for you.
Which is better NIT Calicut or NIT Surat for mechanical?
If you want to study mechanical engineering, I would recommend NIT Surat without a doubt. NIT Surat specializes in mechanical engineering. Let me share some details I got to know about while researching.
- It is the most organized and well-established department here.
- You could tell the difference between the faculties of the mechanical department and the others.
- The majority of the faculty are PhDs from prestigious IITs and well experienced in their particular fields.
- Furthermore, there are numerous mechanical clubs that are well established.
- So, in addition to excellent classroom teaching, you would gain hands-on experience on practical projects.
| Categories | NIT Calicut | NIT Surat |
| Total course fee | 5.42 lakhs | 5.63 lakhs |
| Placement rate | 85% | 90% |
| Average salary package | 8.1 lakhs | 12 lakhs |
| Top recruiters | ABB, ADP, Amadeus, amdocs, Ashok Leyland, Bajaj Auto, CapGemini. | Airtel, Ashok Leyland, Bharat Petroleum Corporation Limited, DE Shaw, EXL, Infosys |
So, if you are truly interested in mechanical engineering, I would recommend that you should not hesitate to apply to NIT Surat.
Which is better: chemical engineering in BITS Pilani or mechanical engineering in PEC Chandigarh?
Choose what interests you. If you are interested in Chemical Engineering, BITS Pilani is a great option. It offers decent academics and exposure. Core Chemical companies and oil companies recruit from the institute. Schlumberger, ONGC, Reliance, etc. are among the major recruiters for the branch. BITS Pilani placement highlights show the average CTC to be around INR 12 LPA for Chemical Engineering.
But if you are interested in Mechanical Engineering, you should choose PEC Chandigarh.
Should I take admission in mechanical at KIIT University, HBTI Kanpur or IET Lucknow?
KIIT will take all of your parents' hard-earned money. They will allow your entire batch to sit in some 2 to 4 average companies through campus placement, but if you want to work for any services-based IT company, you can get admission to KIIT. If GATE/IES/PSU is your goal, it is best to study in a college that is close to your home and has lower fees.
HBTI is the best not only in UP but across the country, with an excellent alumni base dating back to 1921. Each year, the best students from UP attend this prestigious institute.
IET is not bad, but when compared to HBTI, it falls short in terms of placements, alumni base, academics, and so on.
SUBSCRIBE TO OUR NEWS LETTER
