What is the admission process for B.Tech at GCRG Lucknow?

GCRG Lucknow B.Tech admission 2026 is through UPTAC centralised counselling. Qualify JEE Main, register on uptac.samarth.edu.in before June 30, and fill choices including GCRG (AKTU Code 473). After allotment on July 9, pay the seat acceptance fee and report to GCRG between July 27 and July 29. A 15% Management quota is available for direct admission without UPTAC.

Is JEE Main mandatory for B.Tech admission at GCRG Lucknow?

Yes, JEE Main is mandatory for the 85% of seats allotted through UPTAC. The remaining 15% are Management and NRI quota seats. Those do not require JEE Main. Contact admission@gcrg.in for quota enquiries.

What is the minimum percentage needed for B.Tech at GCRG Lucknow?

Candidates must have minimum 45% aggregate marks in 10+2 for General, OBC, and EWS categories. SC and ST candidates need minimum 40%. Physics and Mathematics are compulsory subjects along with Chemistry or Computer Science.

Which entrance exams are accepted for MBA admission at GCRG Lucknow?

GCRG Lucknow MBA 2026 primarily accepts CMAT scores. CAT and MAT are also accepted per AKTU norms. Admission runs through UPTAC counselling. Candidates must hold a bachelors degree with at least 50% marks (45% for SC/ST/OBC).

How does B.Sc. Nursing admission work at GCRG Lucknow?

B.Sc. Nursing admission at GCRG Lucknow 2026 is through the UP CNET exam conducted by ABVMU. Register at abvmuup.edu.in. Application fee is INR 3,000 for General and OBC or INR 2,000 for SC, ST, and PwD candidates. Qualify with at least the 50th percentile (General) and participate in ABVMU centralised counselling to secure a seat at GCRG.

What is the UPTAC 2026 registration last date?

UPTAC 2026 registration closes on June 30, 2026. This is the extended deadline. Candidates who miss this date cannot participate in any round of UPTAC counselling. Register at uptac.samarth.edu.in before the deadline.

Does GCRG Lucknow offer direct admission without an entrance exam?

Direct admission without an entrance exam is available only under the Management and NRI quota, which covers 15% of B.Tech and MBA seats. BBA admission at GCRG is also merit-based without a mandatory entrance test. All other programmes require a qualifying exam.

What B.Tech specialisations are offered at GCRG Lucknow?

GCRG Lucknow offers nine B.Tech branches: Computer Science and Engineering, CSE with AI and ML, CSE with Data Science, CSE with IoT and Cyber Security, Electronics and Communication Engineering, Electrical Engineering, Civil Engineering, Mechanical Engineering, and Biotechnology. Each branch has 60 seats.

What scholarships are available at GCRG Lucknow?

GCRG offers merit scholarships linked to JEE Main and JEECUP ranks, the GCRG Memorial Trust Scholarship for economically weaker students, a Girl Child Incentive scheme for female students, and a need-based concession scheme. SC, ST, OBC, and EWS students can additionally apply for the UP Government post-matric scholarship at scholarship.up.gov.in.

Can a student in the final year of graduation apply for MBA at GCRG Lucknow?

Yes, final-year graduation students can appear in CMAT or CAT and register for UPTAC counselling. The passing certificate and final marksheet must be submitted at the time of physical reporting. Admission is cancelled if the required degree percentage is not met at the time of verification.

GCRG Lucknow Diploma Welder: Fees 2026, Course Duration, Dates, Eligibility

Collegedunia Team

Content Curator | Updated 3+ months ago

The Diploma in Welder at G.C.R.G. Group of Institutions, Lucknow is a one-year full-time ITI (Industrial Training Institute) trade course offered under the Craftsmen Training Scheme (CTS). The course is affiliated with the Directorate of Technical Education (DTE), Uttar Pradesh, and approved by the National Council for Vocational Training (NCVT). With 21 seats available, the programme trains students in various welding techniques including Gas Welding, SMAW (Shielded Metal Arc Welding), GMAW, GTAW, and Oxy-acetylene cutting processes. The total fee for the course is approximately Rs. 25,000. Admission is based on merit through the SCVTUP (State Council of Vocational Training, Uttar Pradesh) online admission process. The Welder trade is highly popular due to strong employment demand in industries such as construction, automobile, railways, defence, and petrochemicals, both in India and abroad.

Admissions for the 2026 batch are expected to open in May-June 2026 through the SCVTUP portal (scvtup.in). Based on the 2025 admission cycle, registration typically opens in May and closes in June, with merit lists and counselling rounds following in July-August. Candidates are advised to monitor the official SCVTUP website for the 2026 admission schedule and deadlines.

Key Points

ITI trade course approved by NCVT (National Council for Vocational Training) and affiliated to DTE, Uttar Pradesh
Trains students in multiple welding processes: GAS welding, SMAW, GMAW, GTAW, Oxy-acetylene cutting, SPOT welding, and PUG cutting
21 seats available per batch
Practical-oriented curriculum with hands-on training in welding of MS sheets, MS pipes, MS plates, SS, and Aluminium
Graduates eligible for employment in BHEL, BEML, NTPC, ONGC, IOCL, HPCL, Railways, Defence, and private industries
Minimum 90% attendance required per subject
Ragging-free campus with strict discipline policy

151 Views Last Year

85 Studentsshown interest in the last 30 days

Official Link:

Go To Website

Highlights
Fees
Admission
Scholarships
FAQs

GCRG Diploma in Welder Fees

The Diploma in Welder (ITI) at GCRG Lucknow is an affordable vocational training programme. The total tuition fee for the one-year course is approximately Rs. 25,000. This makes it accessible to students from economically weaker sections who wish to acquire a skilled trade qualification.

Fee Components

Fee Component	Amount (Rs.)
Tuition Fees (1 Year)	25,000
Registration / Application Fee	250 (General/OBC) / 150 (SC/ST)
Total Fees (approx.)	25,250 - 25,400

Hostel facilities are available separately at additional cost.
Fee for Direct Admissions (NRI/Management quota) is as per DTE norms.
Fees are subject to revision as per DTE/NCVT guidelines.
SC/ST students may be eligible for UP Government post-matric scholarship.

GCRG Diploma in Welder Admission 2026

Admission to the Diploma in Welder (ITI) at GCRG Lucknow is conducted through the SCVTUP (State Council of Vocational Training, Uttar Pradesh) online admission process. Admission is strictly merit-based, determined by marks obtained in the qualifying examination (Class 10). The 2026 admission cycle is expected to follow a similar schedule to 2025. Direct admissions under NRI/Management quota are also available as per DTE norms.

SCVTUP ITI Admission Dates

Event	Tentative Date
SCVTUP Online Registration Opens	May 2026
SCVTUP Online Registration Closes	June 2026
Merit List Release	July 2026
Counselling / Seat Allotment Round 1	July 2026
Counselling / Seat Allotment Round 2	August 2026
Course Commencement	August 2026

All dates are tentative and subject to change. Candidates must check the official SCVTUP website (scvtup.in) for confirmed schedules.

The dates mentioned above are tentative and subject to change.

Eligibility Criteria

Candidates must have passed Class 10 (Matriculation) from a recognised board with Science and Mathematics as subjects.
Minimum age: 14 years (as per NCVT norms).
No upper age limit for most ITI trades.

Admission Process

Visit the official SCVTUP portal (scvtup.in) during the registration window.
Register online and fill in personal and academic details accurately.
Pay the application fee online (Rs. 250 for General/OBC, Rs. 150 for SC/ST).
Upload required documents including Class 10 marksheet, category certificate (if applicable), and identity proof.
Check the merit list on the SCVTUP portal.
Participate in the counselling/seat allotment process and select GCRG Lucknow as your preferred institute.
Report to GCRG Lucknow for document verification and complete the admission formalities.
For Direct Admission (NRI/Management quota), contact the GCRG Admissions Cell at admission@gcrg.in or call 0522-3066103.

GCRG Diploma in Welder Scholarships 2026

Students enrolled in the Diploma in Welder (ITI) at GCRG Lucknow may be eligible for UP Government post-matric scholarships based on their category and family income. SC/ST and OBC students domiciled in Uttar Pradesh can apply through the official UP Scholarship portal. The scholarship can cover a significant portion of the course fee, making the programme virtually free for eligible students.

Scholarship Schemes

Scholarship	Eligibility	Amount (Approx.)
UP Government Post-Matric Scholarship (SC/ST/OBC)	UP domicile, SC/ST/OBC category, income criteria	Covers tuition fee (variable)
National Scholarship Portal (NSP) Schemes	As per NSP eligibility criteria	Variable

UP Government scholarships are available primarily to students domiciled in Uttar Pradesh.
Applications are made through the official UP Scholarship portal (scholarship.up.gov.in).
Application deadlines are typically announced in October-November each year.
Students must maintain satisfactory attendance and academic performance to retain scholarship benefits.

GCRG Diploma in Welder FAQs

Ques. Is the Diploma in Welder at GCRG Lucknow a government-recognised qualification?

Ans. Yes, the Welder trade course at GCRG Lucknow is approved by the National Council for Vocational Training (NCVT) and affiliated with the Directorate of Technical Education (DTE), Uttar Pradesh. Upon successful completion, students receive an NCVT-recognised National Trade Certificate (NTC), which is accepted by employers across India and in several countries abroad, particularly in the Gulf region and Southeast Asia.

Ques. What are the job opportunities after completing the Welder ITI course from GCRG Lucknow?

Ans. Graduates of the Welder ITI course have employment opportunities in a wide range of industries including structural fabrication (bridges, buildings), automobile and allied industries, power stations, railways, shipbuilding, defence organisations, and petrochemical companies like ONGC, IOCL, and HPCL. Public sector companies like BHEL, BEML, and NTPC also recruit ITI Welder graduates. Additionally, skilled welders have strong demand for overseas employment, particularly in the Gulf countries and Southeast Asia.

Ques. What welding techniques are taught in the course at GCRG Lucknow?

Ans. The Welder ITI course at GCRG Lucknow covers a comprehensive range of welding techniques including Gas Welding (GAS), Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Gas Tungsten Arc Welding (GTAW), Oxy-acetylene cutting, SPOT welding, and PUG cutting. Students also learn to weld different materials including Mild Steel (MS), Stainless Steel (SS), and Aluminium in various positions and configurations.

Ques. Can I pursue further studies after completing the Welder ITI course?

Ans. Yes, after completing the Welder ITI course, students can pursue B.Tech (Lateral Entry) in Mechanical or related engineering branches after completing a Diploma (Polytechnic) course. They can also appear for the Apprenticeship Training under the Apprentices Act to gain industry experience. Additionally, students can pursue advanced welding certifications from organisations like the Indian Institute of Welding (IIW) to enhance their career prospects and earning potential.

Ques. How is admission to the Welder ITI course at GCRG Lucknow conducted?

Ans. Admission is conducted through the SCVTUP (State Council of Vocational Training, Uttar Pradesh) online portal (scvtup.in). The process is merit-based, with selection determined by marks obtained in Class 10. Students need to register online during the admission window (typically May-June), pay the application fee, and participate in the counselling/seat allotment process. Direct admissions under NRI/Management quota are also available as per DTE norms by contacting the GCRG Admissions Cell.

Ques. What is the difference between the Welder ITI course and a Diploma in Welding Technology from a polytechnic?

Ans. The Welder ITI course is a one-year NCVT-approved trade certificate programme focused on practical welding skills, designed for students who have passed Class 10. A Diploma in Welding Technology from a polytechnic is typically a three-year programme that covers both theoretical engineering concepts and practical welding skills, and requires Class 10 or 12 for admission. The ITI course is more suitable for students who want to quickly enter the workforce as skilled welders, while the Diploma provides a broader engineering foundation and opens doors to supervisory and technical roles.