Bachelor of Engineering [B.Eng] [Manufacturing Engineering] From University of Nottingham

University of Nottingham Bachelor of Engineering (BEng) Manufacturing Engineering is currently titled Mechanical Engineering with Manufacturing BEng on Nottingham’s 2027 course page. The three-year, full-time course at University Park Campus starts in September 2027 and requires the AAA-equivalent Indian board result with specified Mathematics preparation. At the published 2027/28 rate, tuition is £33,500 (INR 42.38 Lakhs) yearly, or £100,500 (INR 1.27 Crore) across three years before increases.

The degree combines mechanical engineering foundations with manufacturing process selection, automation, production systems and a major final-year project. It suits applicants who enjoy Mathematics, design and hands-on problem-solving, although the intensive timetable requires more than laboratory interest alone.

• Students use robotics, CNC systems and 3D printing facilities in practical project work.
• The BEng permits transfer to a separate course containing an industrial year, subject to university rules.
• The three-year route is shorter than the four-year MEng while retaining manufacturing-focused final-year modules.

Also Check: University of Nottingham course admission

Nottingham BEng Manufacturing Fees and Living Costs 2027

Nottingham publishes £33,500 (INR 42.38 Lakhs) for international students on H708 in 2027/28. The fee covers registration, tuition, initial examination and graduation, but the university reserves the right to increase international tuition annually.

Consequently, £100,500 (INR 1.27 Crore) is an unchanged-rate calculation across three years, not a guaranteed programme bill. Applicants should preserve a contingency for 2028/29 and 2029/30 rather than borrowing only the calculated baseline.

Fee context: The amounts below apply to September 2027 entry and the full-time, three-year BEng route.

All INR conversions in the article use a conversion rate of GBP 1 = INR 126.50 as of 23 October 2026. Rates fluctuate daily, verify before applying.

Source: University of Nottingham 2027/28 undergraduate fee table, H708 course page and 2027/28 fee regulations.

• Nottingham supplies design materials and first-year workshop protective equipment, reducing compulsory project purchases.
• Students still need a suitable personal computer, although the course page publishes no required purchase price.
• Travel and accommodation for an optional summer placement are outside tuition, so fund them only after securing a placement.

Cost of Living in Nottingham for Manufacturing Students

Nottingham’s current guidance estimates £800 to £1,200 (INR 1.01 Lakhs to INR 1.52 Lakhs) monthly, including accommodation, food and transport. This combined estimate should remain separate from the UK Student visa maintenance requirement.

University accommodation is separately listed at £99 to £312 (INR 12,524 to INR 39,468) weekly. Use that range to compare rooms, but do not add it again to the combined monthly estimate.

A first-year tuition-and-living calculation is £43,100 to £47,900 (INR 54.52 Lakhs to INR 60.59 Lakhs). This adds one published tuition year to twelve months of current living costs.

The three-year unchanged-rate planning illustration is £129,300 to £143,700 (INR 1.64 Crore to INR 1.82 Crore). It excludes visa charges, flights and future fee increases.

Read More: UK accommodation and living-cost planning

Key insight: First-year tuition and living costs total INR 54.52 Lakhs to INR 60.59 Lakhs. Fund later-year increases separately from this published-rate baseline.

Nottingham BEng Manufacturing Engineering Admission 2027

September 2027 entry requires AAA, with Mathematics and the specified science or design combination. Nottingham’s India guidance converts that offer by examination board and averages the four highest Class XII subjects.

The course publishes no separate GMAT, GRE or professional-experience condition. Selection therefore depends on academic preparation, required subjects, English evidence and the complete UCAS application.

Academic Eligibility for Indian Applicants

The official Indian equivalents below correspond to Nottingham’s AAA offer. Required Mathematics and supporting subjects remain course conditions, so a qualifying four-subject average does not replace the subject check.

The course normally involves 20 to 22 contact hours weekly in years one and two, with total study exceeding 40 hours. Applicants should demonstrate readiness for mathematical analysis, laboratories and concurrent project deadlines.

Nottingham does not publish a course-specific acceptance rate or admitted-student grade profile for H708. The AAA standard is an eligibility threshold, not evidence of an individual admission probability.

English Language Requirements

IELTS (International English Language Testing System) Academic requires 6.0 overall with no less than 5.5 in each element. A strong total cannot compensate for any component below 5.5.

Nottingham separately publishes revised TOEFL scores for tests taken after January 2026. The university’s scale must be used directly because self-converting an older score could misstate eligibility.

• Book IELTS when any component is likely to fall below 5.5.
• Use the Class XII English route only with a qualifying CBSE or CISCE certificate.
• Keep Mathematics, overall board marks and English evidence as three separate checks.

Check Out: University of Nottingham engineering courses

Tip for Indian students: Meeting the AAA-equivalent board average is only the first gate. Confirm Mathematics, supporting subjects and English evidence before submitting.

Nottingham BEng Manufacturing Engineering Application 2027

Apply through UCAS for the September 2027 intake using Nottingham institution code N84 and course code H708. The checked university and UCAS records list no January or summer start for this course.

Applications are open and equal consideration closes on 13 January 2027. Later submission remains possible through UCAS, but Nottingham need not consider it after all on-time applications.

Application Stages and Deadlines

The UK timestamp controls each UCAS portal cutoff. January uses Greenwich Mean Time, while the June and September cutoffs use British Summer Time.

Application context: These are the remaining published stages for September 2027 entry as of 23 October 2026.

The official UCAS H708 listing confirms the three-year course, University Park Campus and September 2027 start. Use the university’s title when searching, because older listings call it Manufacturing Engineering.

Building the UCAS Application

The 2027 personal statement answers three questions covering subject motivation, academic preparation and useful experience beyond formal education. Each response should connect evidence to manufacturing-focused study rather than describe engineering interest generically.

Use Mathematics and Physics work to establish analytical readiness, then add one project involving design, programming, fabrication or process improvement. Explain the constraint, your method and the result instead of listing activities.

The application also needs an academic reference before submission. Ask the referee to confirm predicted grades and relevant quantitative preparation, especially when Indian board results will be released after January.

• Enter N84 and H708 exactly so the application reaches the three-year BEng route.
• Complete the academic reference before 13 January 2027 at 23:30 IST.
• Use one manufacturing or design problem to demonstrate structured technical reasoning.
• Keep English-test booking separate from the UCAS submission when the score is still pending.

The course page lists no separate admissions test or mandatory interview for H708. Nottingham can still request clarification or evidence, so monitor the applicant portal after submission.

Application tip: Submit H708 by 13 January 2027 at 23:30 IST. Make the required Mathematics preparation visible in qualifications, projects and the academic reference.

Nottingham BEng Manufacturing Engineering Scholarships 2027

Nottingham currently publishes merit and sporting awards that can include international BEng students. However, the checked pages do not label their terms or deadlines specifically for September 2027 entry.

Award context: The values below are current published opportunities, not confirmed 2027-cycle entitlements. Recheck eligibility after receiving an offer because award terms can change before enrolment.

The Excellence Scholarship reduces only the first published tuition year to £28,500 (INR 36.05 Lakhs) if awarded. That calculation subtracts the exact £5,000 (INR 6.33 Lakhs) award from £33,500 (INR 42.38 Lakhs).

Nottingham states that Excellence recipients must be self-funded without another university award or external sponsorship. Education-loan applicants should confirm whether their funding arrangement meets that condition before relying on the reduction.

• Treat £5,000 (INR 6.33 Lakhs) as first-year support, not a three-year tuition reduction.
• Prepare sporting evidence before January because the international sporting application opens then.
• Do not add overlapping sporting package values unless Nottingham confirms that the awards can be combined.

Also Check: University of Nottingham scholarships

Scholarship reality: The broad merit award currently covers £5,000 (INR 6.33 Lakhs) of first-year tuition. It does not remove later-year fee-increase or living-cost risk.

Nottingham BEng Manufacturing Engineering Salary 2027

The closest official department outcome reports 92.6% in graduate-level work or further study within 15 months. It combines mechanical, materials and manufacturing undergraduates from the 2021/22 and 2022/23 cohorts.

Its reported average starting salary is £32,726 (INR 41.40 Lakhs) annually. This is department-level evidence, not a guaranteed H708 salary or an India-return benchmark.

Employment Evidence and Salary Scope

Course-specific H708 data are insufficient for separate publication, so the table labels each broader evidence group. Applicants should use these figures to test career assumptions rather than predict an individual offer.

Source: University of Nottingham course outcomes and official Discover Uni data for the stated cohorts.

Reported graduate destinations include Jaguar Land Rover, Tata Steel, Procter & Gamble, Rolls-Royce, Ford and Thales. Their presence proves individual destinations only, not routine hiring, sponsorship or placement volume.

Official student survey data for production and manufacturing engineering report 92% positive teaching feedback and 97% for learning opportunities in 2024/25. These subject-level responses support the practical learning proposition without establishing graduate pay.

Return on Investment for Indian Applicants

The calculated three-year tuition-and-living baseline is £129,300 to £143,700 (INR 1.64 Crore to INR 1.82 Crore). Visa charges, travel and later tuition increases sit outside that planning range.

• The £32,726 (INR 41.40 Lakhs) department average is gross UK salary evidence, so compare net UK cash flow before fixing loan repayments.
• The 18-month Graduate visa window limits post-study job-search time, so prioritise internships and industrial-year decisions before final year.
• The £5,000 (INR 6.33 Lakhs) merit award covers only first-year tuition, so retain funding for two full later-year bills.
• India-return earnings are not published for H708, so test loan affordability against a verified Indian role offer instead of converting UK salary.

UK take-home pay varies with tax, National Insurance and personal circumstances. Use the official tax estimate service before comparing gross salary with education-loan payments.

ROI reality: Official department outcomes are positive, but the calculated cost reaches INR 1.64 Crore to INR 1.82 Crore. Proceed only when funding survives later fee increases and a delayed UK job offer.

UK Visa for Nottingham BEng Manufacturing Students 2027

The Student visa supports the three-year Nottingham course, while the Graduate visa can provide 18 months after completion. Verify the application route through the official UK Student visa service before paying any charge.

• From 30 November 2026, maintenance is £10,827 (INR 13.70 Lakhs) at £1,203 (INR 1.52 Lakhs) monthly, while Student visa application costs £558 (INR 70,587).
• The Graduate visa offers 18 months from 2027 applications, costing £937 (INR 1.19 Lakhs) plus £1,035 (INR 1.31 Lakhs) yearly health surcharge.
• A Skilled Worker switch normally needs £41,700 (INR 52.75 Lakhs) or the higher going rate, followed by five qualifying years for settlement.
• Undergraduates normally cannot bring dependants except qualifying government-sponsored students, while Graduate visa time does not start the five-year Skilled Worker settlement period.

Read More: UK post-study work visa

Visa reality: The post-study window is 18 months for 2027 applications. Build employer research into the degree because Graduate visa time does not count toward Skilled Worker settlement.

Nottingham BEng Manufacturing Engineering Ranking 2027

Nottingham is ranked 5th in the UK for Manufacturing and Production Engineering in the Complete University Guide 2026. This discipline result aligns directly with the course’s manufacturing emphasis.

QS Subject Rankings 2026 also place Nottingham within the UK top 10 and world top 100 for Mechanical and Aeronautical Engineering. That broader subject scope supports context, but it does not rank H708 separately.

Neither ranking measures individual placement probability, scholarship access or pending professional accreditation. Use the manufacturing-specific result to assess academic visibility, then judge H708 through its modules, facilities and verified outcomes.

Check Out: University of Nottingham rankings

Key insight: The 5th-place UK manufacturing ranking is the closer course signal. It strengthens subject fit, but applicants must still verify H708 accreditation separately.