Difference Between in Chemistry: Comparison Articles, Important Tips

Content Curator

Questions based on Differences and Comparisons in Chemistry are among the most frequently asked questions in almost all exams of this subject. In this article, important difference between articles have been provided in a tabular form to help students prepare for such questions in a better and more effective way.

Also check: Class 12 Chemistry Syllabus (Updated)

Difference Between Articles in Chemistry

Organometallic compounds	Difference Between Fluid and Liquid
Difference Between Molecular and Compound	Difference Between Galvanic Cell and Electrolytic Cell
Difference Between Soap and Detergent	Difference Between Gas and Liquid
Difference Between Vapor and Gases	Difference Between Organic and Inorganic Compunds
Sigma and Pi Bond: Definition, Strength, Differences	Difference Between Polar and Non Polar
Difference Between Alkali and Base	Difference Between Aldehydes and Ketones
Difference Between Cell and Battery	Difference Between Crystalline and Amorphous
Difference Between Elements and Atoms	Difference Between Electronegativity and Electron Affinity
Difference Between Fats and Oils	Difference Between Extensive and Intensive Properties
Difference Between Acetic Acid and Glacial Acetic Acid	Difference Between Primary Cell and Secondary Cell
Difference Between Vaporization and Evaporation	Difference Between Atom and Molecule
Difference Between Evaporation and Condensation	Difference Between Baking Soda and Baking Powder
Difference Between Ideal Gas and Real Gas	Difference Between Compound and Mixture
Difference Between Glucose and Fructose	Difference Between Element and Compound
Difference Between Hard Water and Soft Water	Difference Between Physical and Chemical Changes
Difference Between Electrophile and Nucleophile	Difference Between Accuracy and Precision
Difference Between Enantiomer and Diastereomers	Difference Between Acid and Base
Difference Between Pure Substance and Mixture	Difference between Cations and Anions
Difference Between Rust and Corrosion	Difference Between CNG and LPG
Difference Between Atomic Mass and Atomic Number	Difference Between Physical and Chemical Properties
Difference Between Natural and Synthetic Fibres	Difference Between Mixture and Solution
Difference Between Atomic Mass and Atomic Weight	Difference Between Metallic and Non-Metallic Minerals
Difference Between Allotropes and Isomers	Difference Between Solid Liquid and Gas
Difference Between Nitrite and Nitrate	Difference Between Mass and Matter
Difference Between Herbicides and Pesticides	Difference Between Erosion and Corrosion
Difference Between Effusion and Diffusion	Difference Between Cis and Trans
Difference Between Endpoint and Equivalence Point	Difference Between Addition and Condensation Polymerization
Difference Between Thermoplastic and Thermosetting Plastic	Difference Between Starch and Cellulose
Difference Between Nuclear Reaction and Chemical Reaction	Difference Between Isotropic and Anisotropic
Difference Between Ethanol and Methanol	Difference Between Aldose and Ketose
Difference Between Carpel and Pistil	Difference Between Gene and DNA
Difference Between Prokaryotic and Eukaryotic Transcription	Difference Between Sperm and Ovum
Difference Between Metallic and Non-Metallic Minerals	Difference Between Nitrate and Nitrite

Important points about Difference Between Questions in Exams:

Main types of comparison questions asked in Higher Secondary Level Chemistry exams involve qualitative comparisons.
Marks allocated for Difference Between questions usually vary from 3 to 7 Marks.
While answering a ‘Difference Between’ question in Chemistry, state the item being compared and then indicate how each organism, site, process, etc., comply with this item.
Comparison questions that ask to “compare and contrast” or “compare”, imply that similarities and differences are to be included.
Questions that ask to “distinguish between”, must be answered only with differences.

Also check:

Study Guides
Class 12 Physics Notes	SI Units in Physics	Physics Study Material
Physics Constants	Relation Between Topics in Physics	Class 12 Physics Practicals
Difference Between Topics in Physics	Derivations in Physics	NCERT Solutions for Class 12 Physics
Class 12 NCERT PCMB-Books	Class 12 Important Formulas	Physics Study Material
NCERT Solutions for Class 6 to 12	NCERT Solutions for Class 12 Maths	NCERT Solutions for Class 12 Chemistry
NCERT Solutions for Class 12 Biology	NCERT Solutions for Class 12 English	Important Formulas
Periodic Table	Chemical Reactions	NCERT Solutions for Class 12
Difference between in Maths	Difference between in Biology	Named Reactions
Math MCQs	Biology MCQs	Physics MCQs
Chemistry MCQs	Class 12 Chemistry Practical	Mendeleev's Periodic Table
Class 12 Notes PCMB	NCERT Class 12 Physics Book PDF	Trigonometry
Mensuration	Permutation and Combination	Geometry
Probability and Statistics	Number Systems	Algebra
Fundamental theorem of Arithmetic	Calculus	Chemistry Study Material
Biology Study Material	Math Formula	Chemistry Formula

CBSE CLASS XII Related Questions

1.
Define the term solution. How many types of solutions are formed? Write briefly about each type with an example.

View Solution

2.
Write the Nernst equation and emf of the following cells at 298 K :
(i) Mg(s) | Mg²⁺ (0.001M) || Cu²⁺(0.0001 M) | Cu(s)
(ii) Fe(s) | Fe²⁺ (0.001M) || H⁺ (1M)|H₂(g)(1bar) | Pt(s)
(iii) Sn(s) | Sn²⁺(0.050 M) || H⁺ (0.020 M) | H₂(g) (1 bar) | Pt(s)
(iv) Pt(s) | Br₂(l) | Br^- (0.010 M) || H⁺ (0.030 M) | H₂(g) (1 bar) | Pt(s).

View Solution

3.
Write down the electronic configuration of:
(i) Cr³⁺ (iii) Cu⁺ (v) Co²⁺ (vii) Mn²⁺
(ii) Pm³⁺ (iv) Ce⁴⁺ (vi) Lu²⁺ (viii) Th⁴⁺

View Solution

4.
A solution of Ni(NO₃)₂ is electrolysed between platinum electrodes using a current of 5 amperes for 20 minutes. What mass of Ni is deposited at the cathode?

View Solution

5.
Comment on the statement that elements of the first transition series possess many properties different from those of heavier transition elements.

View Solution

6.
The rate constant for the decomposition of hydrocarbons is 2.418 x 10^-5 s^-1 at 546 K. If the energy of activation is 179.9 kJ/mol, what will be the value of pre-exponential factor.

View Solution

View All

CBSE CLASS XII Previous Year Papers

Chemistry

Chemistry NCERT Solutions

NCERT Solutions for Class 6 to 12: Download Free NCERT Solutions PDFs

Difference Between in Chemistry: Comparison Articles, Important Tips

Difference Between Articles in Chemistry

CBSE CLASS XII Related Questions

1.
Define the term solution. How many types of solutions are formed? Write briefly about each type with an example.

3.
Write down the electronic configuration of:
(i) Cr³⁺ (iii) Cu⁺ (v) Co²⁺ (vii) Mn²⁺
(ii) Pm³⁺ (iv) Ce⁴⁺ (vi) Lu²⁺ (viii) Th⁴⁺

4.
A solution of Ni(NO₃)₂ is electrolysed between platinum electrodes using a current of 5 amperes for 20 minutes. What mass of Ni is deposited at the cathode?

5.
Comment on the statement that elements of the first transition series possess many properties different from those of heavier transition elements.

6.
The rate constant for the decomposition of hydrocarbons is 2.418 x 10^-5 s^-1 at 546 K. If the energy of activation is 179.9 kJ/mol, what will be the value of pre-exponential factor.

Comments

SUBSCRIBE TO OUR NEWS LETTER

Difference Between in Chemistry: Comparison Articles, Important Tips

Difference Between Articles in Chemistry

CBSE CLASS XII Related Questions

1. Define the term solution. How many types of solutions are formed? Write briefly about each type with an example.

3. Write down the electronic configuration of:(i) Cr3+ (iii) Cu+ (v) Co2+ (vii) Mn2+ (ii) Pm3+ (iv) Ce4+ (vi) Lu2+ (viii) Th4+

4. A solution of Ni(NO3)2 is electrolysed between platinum electrodes using a current of 5 amperes for 20 minutes. What mass of Ni is deposited at the cathode?

5. Comment on the statement that elements of the first transition series possess many properties different from those of heavier transition elements.

6. The rate constant for the decomposition of hydrocarbons is 2.418 x 10-5 s-1 at 546 K. If the energy of activation is 179.9 kJ/mol, what will be the value of pre-exponential factor.

Comments

SUBSCRIBE TO OUR NEWS LETTER

1.
Define the term solution. How many types of solutions are formed? Write briefly about each type with an example.

3.
Write down the electronic configuration of:
(i) Cr³⁺ (iii) Cu⁺ (v) Co²⁺ (vii) Mn²⁺
(ii) Pm³⁺ (iv) Ce⁴⁺ (vi) Lu²⁺ (viii) Th⁴⁺

4.
A solution of Ni(NO₃)₂ is electrolysed between platinum electrodes using a current of 5 amperes for 20 minutes. What mass of Ni is deposited at the cathode?

5.
Comment on the statement that elements of the first transition series possess many properties different from those of heavier transition elements.

6.
The rate constant for the decomposition of hydrocarbons is 2.418 x 10^-5 s^-1 at 546 K. If the energy of activation is 179.9 kJ/mol, what will be the value of pre-exponential factor.