Questions Asked On KNIT, Sultanpur

When it comes to choosing one between BIET Jhansi and KNIT Sultanpur, a short and simple answer would be KNIT Sultanpur. To elaborate, KNIT Sultanpur is far better than BIET Jhansi keeping in mind the following factors:

1. Faculty
2. Infrastructure
3. Placements

When it comes to fees, there is not much difference. The fee structure of the institutions is quite similar. But, since KNIT Sultanpur is a government institution, it provides scholarship to its deserving students. It is easy to avail of the scholarship, considering the fact that you fulfil the criteria required.

KNIT Sultanpur exposes you to different kinds of forums. These forums will contribute to enhancing your skills and knowledge as well as will be helpful in self-development. This way you will be occupied and barely have time to waste. Also, there are many short term training programs within the campus of KNIT Sultanpur which will help you in gaining practical knowledge.

Among all the mentioned colleges, MMM Gorakhpur is the best.

JSS Noida is a private college and all the other three colleges are government colleges. So, choosing a private UPTU college over a government college does not make sense. 

Now, when you make a comparison between the other three government colleges i.e. BIET Jhansi, KNIT Sultanpur and MMM Gorakhpur, MMM Gorakhpur steals the show. 

It is highly recommended because of the following reasons:

1. Highly experienced faculty members
2. Good and proper facilities
3. The beautiful campus which is spread over 360 acres.

Alumni of MMM Gorakhpur are in India as well as in other countries working at prestigious positions. The institution has been given the status of a university from a college and there are proposals for it to be promoted to an NIT or an IIT. It can be said that MMM Gorakhpur has a bright future.

When it comes to campus placement, since JSS Noida is located at a better place than the others, it gets the location advantage and therefore, provides slightly better placement opportunities. But, being a student of MMM Gorakhpur will ensure you good packages in off-campus placements. It is you who will have to make the final decision.

As you have come up with this doubt, I assume that you have got a good rank in UPSEE. So, congratulations on securing a good rank in UPSEE that gave you the opportunity to choose from such elite institutions.

Unless and until it is an IIT, core branches are always a better choice than non-core branches.

Forget about non-core branches in UP government colleges, there is not much facilities and exposure. So, if you are getting a chance, it is highly recommended to go for CSE in BIET or KNIT because in CSE or IT, you just need a laptop and good internet connectivity and these colleges provide WIFI facility. You will have to indulge yourself in regular practice to bring the best out of yourself, as everything is available on the internet.

CSE would be a better choice if you look forward to getting placed after your graduation. If you want to pursue higher studies then, non-core branches at IET Lucknow will give you a better exposure such as coaching institutes, because of its location.

IET Lucknow, KNIT Sultanpur, and MMM Gorakhpur are the engineering institutes in Uttar Pradesh. The admission of MMM is on MET/ JEE Mains basis, whereas the other two are on the cut-off of UPSEE. According to some of the reviews online, I would suggest you go for IET Lucknow.

• IET Lucknow is the best choice, followed by MMM Gorakhpur. It provides excellent exposure to the students. 
• There are various activities taking place on campus apart from academics.
• The institute is the top-ranked college of UPTU.
• IET and MMM have a long way to go. Therefore, both the institutes do not have an alumni network.
• The top recruiters of IET Lucknow are TCS, Amazon, Code Nation, HCL, Yamaha, Global Logic, New Gen, and more.
• It provides basic facilities like Wi-Fi, canteen, hostels, library, laboratories, sports and others. IET is well-equipped.

The fee and placement details are below.

Overall, IET and MMM are the best institutes. The choice between the two depends upon your own interest and the return on investment. KNIT Sultanpur is a namesake Government college. It is not good compared to the others.

I have friends from both IET Lucknow and KNIT Sultanpur and according to them, you will not get any of IET Lucknow or KNIT Sultanpur with this rank. Your OBC rank will not be of any help as selections in the spot round are done based on the general rank and there is no reservation. Also, at IET/KNIT, seats for core branches like CS/EC/ME, fill up first. 

If you are a fresher then I will suggest you take a year drop and appear for various entrance exams next year and, if you are not a fresher then, you can go to other colleges. You will not get the atmosphere like IET Lucknow anywhere else, and hence, taking a year drop will be the best in any case. The environment is very competitive at IET Lucknow. Even KNIT Sultanpur lags in this case. The location of IET Lucknow is perfect for coaching for exams like CAT, GATE, IES, IAS, etc.

Visit the official websites, to get the detailed information regarding the cutoff required at these institutes. 

In terms of placement statistics among KNIT Sultanpur, IET Lucknow and BIET Jhansi, IET Lucknow is the best. They are all government colleges but IET Lucknow has an advantage; It is located in the capital city of Uttar Pradesh and offers vast opportunities and exposure. JSS Noida is equally good; it is one of the most prestigious private colleges located in Delhi NCR. 

Important details about the placement statistics are discussed below.

IET Lucknow:

• IES has a better placement record as compared to the other colleges.
• It is also located in the capital city of U.P.

JSS Noida:

• JSS is affiliated to UPTU. Most students from this institute get placed due to its good location.
• In the Delhi NCR region, JSS is a reputed private college.
• The highest CTC offered at JSS is almost the same as IET.

If you have a choice between the two then go for IET Lucknow since It is a government college located in a prime location with an affordable fee structure. According to placements, the ranking order of the institute will be JSS Noida > IET > KNIT Sultanpur > BIET Jhansi.

Having friends from IET and studying at BIET, I have enough knowledge about both the institutions. So, my suggestion will be HBTI. It will be a better choice than the others. But before selecting any college you must first learn about each college and its branches. 

Firstly while choosing an institution, know where your interest lies and then opt for the desired subject. Secondly, choose the college which gives you more exposure. Make the list of all the pros and cons of the institutions and make a final decision based on it.

• Research about every stream - Gain information about each stream the college is offering, and choose the one that strikes your interest. Also research about the future prospects of the subject, which will help you make an informed decision.
• Examine what you require from the college - Every student has a different need from the institution they study in. This could be prospects in higher education, competitive exams like CAT, GATE, UPSC or maybe the college’s industrial, cultural and technical exposure.
• Pointing out pros and cons of any institution is equally necessary. Talking to ex-students of that institution will provide a clearer picture of the institution. Always before committing over an institution, check your long term goals and how it will strengthen your career.

IT or Chemical Engineering from Harcourt Butler Technical University or HBTI will be a better option than other colleges. HBTI is one of the oldest engineering institutes that offers Bachelors, Masters, and Doctoral programs. The placement cell of HBIT is also good. Therefore, you can choose the HBTI for IT or Chemical Engineering. You can choose either branch in the field as per your interest and in the sector, you want to pursue your career.